10BASE-T1S TEKTRONIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

www.tek.com 1 10BASE-T1S Automotive Ethernet Compliance Test Solution Option 5-CMAUTOEN10 and 6-CMAUTOEN10 Datasheet

Get more visibility into your Automotive Ethernet designs with 10BASE- T1S Automotive Ethernet Compliance Test Solution for the 5 Series and 6 Series B MSOs Mixed Signal Oscilloscope. The combination of the oscilloscope, analysis software, and a wide range of available analog probes enable you to perform detailed and accurate amplitude and timing measurements on your designs. The integration of Automotive Ethernet is placing greater demands on technology and is placing even greater demands on comprehensive design validation to ensure interoperability between multiple Electronic Control Units (ECU) and reliability in demanding environments. A complete testing solution enables passing strict compliance tests and provides greater confidence in design margins under real world conditions. Key features

  • Test time: Fully automated with a setup wizard to perform compliance testing as per the 10BASE-T1S (IEEE 802.3cg™) standard. Highly optimized and intuitive user interface for quick test configuration and validation of electrical signals. The 5- CMAUTOEN10/6-CMAUTOEN10 software automatically configures equipment per the test requirements which reduces overall test execution time.
  • Test coverage: The TekExpress Automotive Ethernet solution for 10BASE-T1S is designed to comply with the IEEE 802.3cg™ specification covering transmitter testing.
  • Validation and debug: Tools such as Advanced Jitter Analysis (DJA) let you identify problems before compliance testing or in the event of a failure.
  • Comprehensive report: Automated reporting with Pass/Fail status and screen shots of the waveforms.
  • Measurement accuracy: Tektronix 5 series and 6 series B Mixed Signal Oscilloscopes offer analog bandwidth up to 8 GHz, sample rates up to 25 GS/s and 12-bit analog-to-digital converters (ADC), delivering the performance needed to capture waveforms with high signal fidelity and resolution.
  • Domain measurements: Time domain and frequency domain measurements (Return Loss and Power Spectral Density) can be made with a single instrument. Tektronix' patented measurement approach in the TekExpress Automotive Ethernet Test Solution enables designers to perform return loss measurements using an oscilloscope, reducing the need for additional test equipment.
  • Performance verification: The Automotive Ethernet application enables you to easily run tests multiple times. The statistics in the reports display Pass/Fail status for each run to help study device performance over different runs. Fully automated compliance testing The Tektronix 5-CMAUTOEN10/6-CMAUTOEN10 Automotive Ethernet (10Base-T1S Short Reach) automated compliance test solution is a fully automated compliance test application for the 10BASE-T1S (IEEE 802.3cg™) standard. Executing all the measurements manually is extremely time-consuming. The TekExpress Automotive Ethernet application provides an automation framework that enables you to execute all the measurements with minimal intervention, only when you need to change connections. The physical layer compliance tests are defined to ensure interoperability between different designs and hardware vendors. The requirements to perform these tests have been expanded and now cover Automotive Ethernet 10BASE-T1S standards. The test suite runs on 5 Series and 6 Series B MSOs, and lets you to take full advantage of the oscilloscope validation and debug capabilities in addition to compliance testing. The Tektronix Automotive Ethernet Solution provides greater confidence in design margins under real world conditions by ensuring that your designs pass the strict 10BASE-T1S compliance tests. Table 1: Supported 10BASE-T1S tests Test Name Test Mode Instrument Transmitter Output Droop 2 350 MHz Oscilloscope Transmitter Timing Jitter 1 Transmitter Power Spectral Density (PSD) Transmitter Clock Frequency 1 Peak Differential Output 1 MDI Return Loss Slave Idle Mode

350 MHz

The 5-CMAUTOEN10/6-CMAUTOEN10 TekExpress Automotive Ethernet software allows for complete or selective testing of any of the transmitter electrical specifications. Tests are configured by following a step-by-step process. Software navigation follows a logical workflow for quick test setups, configurations, and review of test results. The software sets up the oscilloscope and automates the tests, guiding you to accurate and repeatable results. Test setup configurations vary greatly in terms of connections to the device under test, probing, test fixtures, calibration, and use of the oscilloscope and signal generator. To help you to correctly set up for a measurement, the Automotive Ethernet software provides setup instructions for each test, with images and reference illustrations, to ensure the correct setup. 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet www.tek.com 1

Figure 3: Jitter measurement Droop measurement The droop measurements are performed by determining the positive and negative waveform peak voltages. The DUT is set to test mode 2. 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet www.tek.com 3

can work in compliance mode, where limits are defined per compliance specifications, or in user defined mode, which allows you to edit the limits to perform characterization of the DUT. Figure 6: DUT setup Validation and debug Validation and debugging are easily accomplished early in the design process and ahead of final compliance testing with the 5 Series and 6 Series B MSOs. The oscilloscopes' standard measurement set, along with the optional DJA (Advanced Jitter and Timing Analysis) software supports several key compliance tests including:

  • Clock frequency
  • Transmitter amplitude with histogram
  • Full characterization of jitter performance including Time Interval Error (TIE)
  • Histogram profiles This type of early testing increases the likelihood of passing compliance tests, while allowing more complete characterization and determination of design margins. Master and slave jitter measurements can be particularly challenging given the tight compliance limits and the need to eliminate any possible sources of random or deterministic jitter. Pass/fail reports The 5-CMAUTOEN10/6-CMAUTOEN10 Automotive Ethernet (10Base- T1S Short Reach) automated compliance test application creates compliance test documentation quickly with a summary report in MHL or PDF format. The software automatically generates a report after test execution is complete, and includes Pass/Fail status to help you quickly analyze the test results. The report also includes test configuration details, waveform plots, oscilloscope screen shots, and margin analysis to provide more insights into your design. Figure 7: Measurement report in MHT format

6 Series B MSO Oscilloscope

With up to 10 GHz analog bandwidth, 50 GS/s sample rates, lowest noise and highest resolution, the 6 Series B MSO oscilloscope has the performance you need to capture waveforms with the best possible signal fidelity. At the heart of the 6 Series B MSO oscilloscope are 12-bit analog-to digital converters (ADCs) that provide 16 times the vertical resolution of traditional 8-bit ADCs. This resolution, combined with an extremely low- noise front end, allows you capture small signal details even on relatively large signals. Test fixtures and probing test points 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet www.tek.com 5

Accurate and repeatable compliance testing requires access to the PHY transmitter output. The recommended approach is to use the Tektronix TF-XGbT Ethernet fixture. These fixtures can support all test setups while providing convenient test points for probing. If there is a provision to probe directly on DUT, user can perform compliance test without fixture. Figure 8: TF-XGbt test fixture 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet www.tek.com 6

Ordering information

Measurements and required hardware Measurements Required hardware Transmitter Output Droop Transmitter Timing Jitter Transmitter Clock Frequency Differential Output Transmitter Power Spectral Density

5 Series or 6 Series B MSOs with a probe (TDP1500, P6247 or P6248)

Return Loss 5 Series or 6 Series B MSOs AFG31102

2 Nos TDP1500, P6247 or P6248 probes

Oscilloscope 5 Series MSO with minimum bandwidth of 350 MHz (option 5-BW-350) or 6 Series B MSO (Option 5-WIN/6-WIN or SUP5-WIN/SUP6-WIN- removable SSD with Microsoft Windows 10 operating system) Signal generators Tektronix AFG31102 Probes TDP1500, P6247 or P6248 (requires use of TPA-BNC adapter) Required software Product Options Automotive Ethernet (10Base-T1S Short Reach) automated compliance test solution Option 5-CMAUTOEN10/6-CMAUTOEN10 or SUP5-CMAUTOEN10/SUP6-CMAUTOEN10 Optional software Product Options Advanced Jitter and Eye Analysis Option 5-DJA/6-DJA or SUP5-DJA/SUP6-DJA Automotive Ethernet Signal Separation Option 5-AUTOEN-SS/6-AUTOEN-SS PAM3 Analysis Option 5-PAM3 or 6-PAM3 100BASE-T1 Protocol Decode Option 5-SRAUTOEN1 or 6-SRAUTOEN1

125 M record length Option 5-RL-125M/6-RL-125M or SUP5-RL-125M/SUP6-RL-125M

CAN, CAN FD, LIN, FlexRay serial bus trigger and decode Option 5-SRAUTO/6-SRAUTO or SUP5-SRAUTO/SUP6-SRAUTO SENT Protocol trigger and decoder Option 5-SRAUTOSEN/6-SRAUTOSEN or SUP5-SRAUTOSEN/SUP6-SRAUTOSEN I2C, SPI serial bus trigger and decode Option 5-SREMBD/6-SREMBD or SUP5-SREMBD/SUP6-SREMBD 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet www.tek.com 7

SMA female to BNC male adapter 2 SMA cables for signal source connections 3 cables of same length 50 ohm SMA M terminator cap 2 Additional accessories for Multidrop test Product Quantity SMA male to SMA female RF coaxial adapter connector three way splitter 50 ohm SMA M terminator cap 4 SMA male to SMA male RF coaxial cable adapter SMA female to female adapter 2 Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments. 10BASE-T1S Automotive Ethernet Compliance Test Solution Datasheet ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 3086 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098 People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea +822 6917 5084, 822 6917 5080 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777 Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835* Taiwan 886 (2) 2656 6688 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.

5 Nov 2020 48W-61650-1

www.tek.com