1069502 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M17, Device connector front mounting, series: M17 PRO, straight, for standard and ONECLICK fast locking system, No. of pos.: 3+PE, contact connection type: Pin, contact diameter 1.5 mm, Crimp connection, flange dimensions: 26 mm x 26 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%) Your advantages Solutions with cross-manufacturer compatibility for standard and fast locking systems• Modern, consistent design for highly convenient operation Crimping connection: vibration- and temperature-resistant assembly All housing can be fitted with pin or socket contacts Safe use in the field, thanks to high degree of protection Commercial data Item number 1069502 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB36 Product key ABRBAL GTIN 4055626746579 Weight per piece (including packing) 22.22 g Weight per piece (excluding packing) 22.22 g Customs tariff number 85366990 Country of origin DE M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 1 (12)

General Order 4 x Ø 1.5 mm crimp contacts separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 2 (12)

warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connectors (device side) Connector Insulating body Coding N Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Crimp connection Contact switching type Pin, contact diameter 1.5 mm Application Power Number of positions 4 Connection profile 3+PE Contact diameter Power contacts 1.5 mm Litz wire cross-section Power contacts min. 0.25 mm² Litz wire cross-section Power contacts max. 2.5 mm² Rated current Power contacts 20 A Note for max. connection cross section Rated voltage 630 V Rated surge voltage 6 kV Overvoltage category III Degree of pollution 3 Contact diameter Signal contacts 1.5 mm Litz wire cross-section Signal contacts min. 0.25 mm² Litz wire cross-section Signal contacts max. 2.5 mm² Installation height 3000 m Housing Housing material GD-Zn Flange dimensions 26 mm x 26 mm Type of locking for standard and ONECLICK fast locking system IP67Degree of protection (plugged in) IP68, 24 h / 2 m Thread type M17 Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (see derating curve) M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 3 (12)

Ø 0,1 A 4xM3 Ø20,1 +0,1 A ±0,5 19,8 -0,2 Rz16 area for Rz16 A-A Installation dimensions M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 4 (12)

19,8 4xØ3,2 M17x1 30,95 4,7 Dimensional drawing Schematic diagram PE Connector pin assignment M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 5 (12)

0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 3x2,5 mm I = current strength, ϑ = ambient temperature, 3x 20 A M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 6 (12)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1069502  cUL Recognized Approval ID: E468743-20230831 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 15 A 2,5 - 2,5 -

 UL Recognized Approval ID: E468743-20230831 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 18 A 2,5 - 2,5 -

M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 7 (12)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 8 (12)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 9 (12)

ST-15KP0,25-2,50 - Crimp contact 1213852 https://www.phoenixcontact.com/us/products/1213852 2.5 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%) ST-Z0014 - Metal protective cap 1616069 https://www.phoenixcontact.com/us/products/1616069 Metal protective cap, M17, degree of protection: IP67, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1243010 M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 10 (12)

ST-Z0013 - Metal protective cap 1616068 https://www.phoenixcontact.com/us/products/1616068 Metal protective cap, M17, degree of protection: IP67, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1243009 M17PRO-VIB-ORING - Sealing ring 1431550 https://www.phoenixcontact.com/us/products/1431550 Vibration O-ring, optional accessory for M17 PRO device connectors M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 11 (12)

PROT-M17PRO-OT-IP20 - Plastic protective cap 1055708 https://www.phoenixcontact.com/us/products/1055708 Plastic protective cap, M17, degree of protection: IP20, series: M17 PRO PROT-M17PRO-OT-IP67 - Plastic protective cap 1055717 https://www.phoenixcontact.com/us/products/1055717 Plastic protective cap, M17, degree of protection: IP67, series: M17 PRO Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M17-3EP1N8AW500S/1,5 - Device connector front mounting 1069502 https://www.phoenixcontact.com/us/products/1069502 Sep 11, 2023, 5:05 AM Page 12 (12)