1069499 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M17, Coupler connector, series: M17 PRO, straight, shielded: yes, for standard and ONECLICK fast locking system, No. of pos.: 3+PE, Direction of rotation: Standard, contact connection type: in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Solutions with cross-manufacturer compatibility for standard and fast locking systems• Modern, consistent design for highly convenient operation Easy, cost-effective cable assembly: uniform shielding of M17 to M40 Commercial data Item number 1069499 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB30 Product key ABRBAG GTIN 4055626746548 Weight per piece (including packing) 68 g Weight per piece (excluding packing) 68 g Customs tariff number 85366990 Country of origin DE M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 1 (11)

Order information: Order 4 x Ø 1.5 mm crimp contacts separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 2 (11)

warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connector (cable-side) Connector Insulating body Coding N Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Crimp connection Contact switching type Socket Application Power Number of positions 4 Direction of rotation Standard Connection profile 3+PE Contact diameter Power contacts 1.5 mm Litz wire cross-section Power contacts min. 0.25 mm² Litz wire cross-section Power contacts max. 2.5 mm² Rated current Power contacts 20 A Note for max. connection cross section Rated voltage 630 V Rated surge voltage 6 kV Overvoltage category III Degree of pollution 3 Contact diameter Signal contacts 1.5 mm Litz wire cross-section Signal contacts min. 0.25 mm² Litz wire cross-section Signal contacts max. 2.5 mm² Installation height 3000 m Housing Housing material GD-Zn Type of locking for standard and ONECLICK fast locking system Pg screw connection none IP67Degree of protection (plugged in) IP68, 24 h / 2 m Thread type M17 Seal Environmental and real-life conditions M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 3 (11)

Ambient temperature (operation) -40 °C ... 105 °C (see derating curve) M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 4 (11)

0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 3x2,5 mm I = current strength, ϑ = ambient temperature, 3x 20 A M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 5 (11)

Ø 22,5 M17x1 52,4 Dimensional drawing M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 6 (11)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1069499  UL Listed Approval ID: E468743-20230831 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 18 A - 2.5  cUL Listed Approval ID: E468743-20230831 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 15 A 2,5 -

M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 7 (11)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 8 (11)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 9 (11)

ST-15KS0,25-2,50 - Crimp contact 1213854 https://www.phoenixcontact.com/us/products/1213854 Crimp contact, Socket, turned, contact diameter: 1.5 mm, crimp range: 0.25 mm2 ... 2.5 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) FLANGE-M17PRO - Square mounting flange 1055766 https://www.phoenixcontact.com/us/products/1055766 Square mounting flange, Axial seal, 4xM3 M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 10 (11)

PROT-M17PRO-OT-IP20 - Plastic protective cap 1055708 https://www.phoenixcontact.com/us/products/1055708 Plastic protective cap, M17, degree of protection: IP20, series: M17 PRO PROT-M17PRO-OT-IP67 - Plastic protective cap 1055717 https://www.phoenixcontact.com/us/products/1055717 Plastic protective cap, M17, degree of protection: IP67, series: M17 PRO Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M17-3ES1N8A9003S/1,5 - Coupler connector 1069499 https://www.phoenixcontact.com/us/products/1069499 Jun 13, 2024, 6:37 AM Page 11 (11)