062.05

62.22 FINDER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

Features

16 A Power relay

• 2 & 3 Pole changeover contacts or NO (≥ 3 mm contact gap)
• AC coils & DC coils
• Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance
• SELV coil-contact separator option
• Cadmium Free contact material options II-2015, www.findernet.com

62 Series - Power relays 16 A

62.32 / 62.33 62.32-0300 / 62.33-0300

2 CO (DPDT) 3 CO (3PDT) 2 NO (DPST-NO), ≥ 3 mm* 3 NO (3PST-NO), ≥ 3 mm*

16/30 16/30 250/400 250/400 4,000 4,000 750 750 AgCdO AgCdO 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400 6 - 12 - 24 - 48 - 60 - 110 - 125 - 220 2.2/1.3 3/3 0.8 UN/0.6 UN 0.8 UN/0.6 UN 0.2 UN/0.1 UN 0.2 UN/0.1 UN 10 · 10 /30 · 10 10 · 10 /30 · 10 100 · 10 100 · 10 11/4 15/3 6 6 1,500 2,500 –40…+70 –40…+50 RT I RT I

• 2 & 3 pole changeover contact
• Plug-in / Faston 187
• 2 & 3 pole normally open contact (≥ 3 mm contact gap)
• Plug-in / Faston 187 Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Motor rating (230/400 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage (U N) V AC (50/60 Hz) V DC Rated power AC/DC VA (50 Hz)/W Operating range AC DC Holding voltage AC/DC Must drop-out voltage AC/DC Technical data Mechanical life AC/DC cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) kV Dielectric strength between open contacts V AC Ambient temperature range °C Environmental protection Approvals (according to type) Distance between contacts ≥ 3 mm (EN 60730-1). **With the AgSnO2 material the maximum peak current is 120 A - 5 ms (NO contact). FOR UL RATINGS SEE: “General technical information” page V For outline drawing see page 10
• Plug-in (92 series sockets) or Faston 187 (4.8x0.5 mm) with optional mounting adaptors
• 2 & 3 Pole changeover contacts or NO (≥ 3 mm contact gap)
• AC coils & DC coils
• UL Listing (certain relay/socket combinations)
• LED, mechanical indicator & test button options
• Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance
• SELV coil-contact separator option
• Cadmium Free contact material options
• Sockets and accessories
• European Patent 62.32 62.33 62.32-0300 62.33-0300 II-2015, www.findernet.com SERIE S 62 Series - Power relays 16 A A

A II-2015, www.findernet.com 62.82 / 62.83 62.82-0300 / 62.83-0300 16/30 16/30 250/400 250/400 4,000 4,000 750 750 AgCdO AgCdO 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400 6 - 12 - 24 - 48 - 60 - 110 - 125 - 220 2.2/1.3 3/3 0.8 UN/0.6 UN 0.8 UN/0.6 UN 0.2 UN/0.1 UN 0.2 UN/0.1 UN 10 · 10 /30 · 10 10 · 10 /30 · 10 100 · 10 100 · 10 11/4 15/3 6 6 1,500 2,500 –40…+70 –40…+50 RT I RT I

• 2 & 3 pole changeover contact
• Flange mount / Faston 250
• 2 & 3 pole normally open contact (≥ 3 mm contact gap)
• Flange mount / Faston 250 Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Motor rating (230/400 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage (U N) V AC (50/60 Hz) V DC Rated power AC/DC VA (50 Hz)/W Operating range AC DC Holding voltage AC/DC Must drop-out voltage AC/DC Technical data Mechanical life AC/DC cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) kV Dielectric strength between open contacts V AC Ambient temperature range °C Environmental protection Approvals (according to type) * Distance between contacts ≥ 3 mm (EN 60730-1). **With the AgSnO 2 material the maximum peak current is 120 A - 5 ms (NO contact). FOR UL RATINGS SEE: “General technical information” page V For outline drawing see page 10
• Faston 250 (6.3x0.8 mm) termination Flange or optional mounting adaptors
• 2 & 3 Pole changeover contacts or NO (≥ 3 mm contact gap)
• AC coils & DC coils
• LED, mechanical indicator & test button options
• Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance
• SELV coil-contact separator option
• Cadmium Free contact material options
• European Patent 62.82 62.83 62.82-0300 62.83-0300

62.31-4800 62.32-4800 1 NO (SPST-NO) double break, ≥ 4.2 mm 2 NO (DPST-NO), ≥ 2.1 mm 16/30* 16/30* 250/400 250/400 4,000 4,000 16/16/12 16/12/6 16/5/3 10/2/1.2 AgSnO2 AgSnO2 6 - 12 - 24 - 48 - 60 - 110 - 125 - 220 1.3 1.3 0.6 UN 0.6 UN 0.1 UN 0.1 UN 10 · 10 10 · 10 100 · 10 100 · 10 16/5 16/5 6 6 3,000 2,000 –40…+70 –40…+70 RT I RT I

• 1 pole normally open contact (double break, ≥ 4.2 mm contact gap)
• Plug-in / Faston 187
• 2 pole normally open contact (≥ 2.1 mm contact gap)
• Plug-in / Faston 187 Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load AC1 VA Breaking capacity DC1: 30/125/220 V A Breaking capacity DC inductive (L/R = 40 ms): 30/125/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage (U N) V DC Rated power DC W Operating range DC Holding voltage DC Must drop-out voltage DC Technical data Mechanical life DC cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) kV Dielectric strength between open contacts V AC Ambient temperature range °C Environmental protection Approvals (according to type) * Maximum peak current 120 A - 5 ms. For outline drawing see page 10
• Plug-in (92 series sockets) or Faston 187 (4.8x0.5 mm) with optional mounting adaptors
• 1 & 2 Pole NO contacts
• High DC load (resistive and inductive) switching capability
• DC coils
• Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance
• Cadmium Free contact material
• Sockets and accessories II-2015, www.findernet.com SERIE S 62 Series - Power relays 16 A A 62.31-4800 62.32-4800

Example: 62 series power relay + Faston 250 (6.3x0.8 mm), rear flange mount, 2 NO (DPST-NO), 12 V DC coil. Type Coil version A B C D 62.22/23 AC-DC 0 - 4 0 - 3 - 5 - 6 0 0 62.32/33 AC-DC 0 - 4 0 - 3 - 5 - 6 0 0 - 6 AC-DC 0 - 4 0 - 5 2 - 4 0 - 6 AC 0 - 4 0 2 - 3 - 4 - 5 0 - 6 AC 0 - 4 0 - 3 3 0 - 6 AC 0 - 4 0 54 / DC 0 - 4 0 4 - 6 - 7 0 - 6 DC 0 - 4 0 - 3 6 0 - 6 DC 0 - 4 0 74 / 62.31/32 DC 4 8 0 0 62.82/83 AC-DC 0 - 4 0 - 3 - 5 - 6 0 0 - 9 AC-DC 0 - 4 0 - 5 2 - 4 0 AC 0 - 4 0 2 - 3 - 4 - 5 0 AC 0 - 4 0 - 3 3 0 DC 0 - 4 0 4 - 6 - 7 0 DC 0 - 4 0 - 3 6 0 A: Contact material 0 = Standard AgCdO 4 = AgSnO 2 (standard for versions 4800) B: Contact circuit 0 = CO (nPDT) 3 = NO (nPST), ≥ 3 mm contact gap 5 = CO (nPDT) + additional physical separator between coil and contacts (for SELV applications) 6 = NO (nPST), ≥ 3 mm contact gap + additional physical separator between coil and contacts (for SELV applications) 8 = NO (1 pole double break or 2 pole) with magnetic blow Series Type 2 = PCB 3 = Plug-in 8 = Faston 250 (6.3x0.8 mm) with rear flange mount No. of poles 1 = 1 pole (double break) 2 = 2 pole 3 = 3 pole Coil version 8 = AC (50/60 Hz) 9 = DC Coil voltage See coil specifications 8 2 0 3 9 D: Special versions 0 = Standard 6 = Rear flange mount 9 = Type 62.82/83 without rear flange mount C: Options 0 = None 2 = Mechanical indicator 3 = LED (AC) 4 = Lockable test button + mechanical indicator 5* = Lockable test button + LED (AC) 54* = Lockable test button + LED (AC) + mechanical indicator 6* = LED + diode (DC, polarity positive to pin A/A1) 7* = Lockable test button + LED + diode (DC, polarity positive to pin A/A1) 74* = Lockable test button + LED + diode (DC, polarity positive to pin A/A1) + mechanical indicator * Options not available for 220 V DC and 400 V AC versions. 0 0

Ordering information

.. . . 0 1 2 6 2 Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074) The dual-purpose Finder test button can be used in two ways: Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. B: Contact circuit 5, 6 Additional physical separator between coil and contacts (for SELV applications) B: Contact circuit 8 Magnetic blow C: Option 3, 5, 54 LED (AC) C: Option 6, 7, 74 LED + diode (DC, polarity positive to pin A/A1) Descriptions: Options and Special versions EU ROPEAN EUROP E AN PATENT II-2015, www.findernet.com A

II-2015, www.findernet.com SERIE S 62 Series - Power relays 16 A A Technical data Insulation according to EN 61810-1 Nominal voltage of supply system V AC Rated insulation voltage V AC Pollution degree Insulation between coil and contact set Type of insulation Overvoltage category Rated impulse voltage kV (1.2/50 μs) Dielectric strength V AC Insulation between adjacent contacts Type of insulation Overvoltage category Rated impulse voltage kV (1.2/50 μs) Dielectric strength V AC Insulation between open contacts Type of disconnection Overvoltage category Rated impulse voltage kV (1.2/50 μs) Dielectric strength V AC/kV (1.2/50 μs) Conducted disturbance immunity Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV) Surge (1.2/50 μs) on A1 - A2 (differential mode) EN 61000-4-5 level 4 (4 kV) Other data Bounce time: NO/NC ms 1/5 (changeover) 3/— (normally open) 3/— (normally open) 3/— (normally open) Vibration resistance (10…150)Hz: NO/NC g 20/8 Shock resistance g 15 Power lost to the environment 2 pole (CO) 3 pole (CO) 2 pole (NO) 3 pole (NO) 1 pole (NO)* 2 pole (NO)* without contact current W 1.3 1.3 3 3 1.3 1.3 with rated current W 3.3 4.3 5 6 3 3.3 Recommended distance between relays mounted on PCB mm ≥ 5 —

2 CO - 3 CO

4,000 Basic III 2,500 Micro-disconnection 1,500/2

2 NO - 3 NO

4,000 Basic III 2,500 Full-disconnection III 2,500/4

1 NO*

4,000 Full-disconnection III 3,000/4

2 NO*

4,000 Basic III 2,500 Full-disconnection** II 2.5 2,000/2.5 * Magnetic blow version ** Only in applictaions where over voltage category II is permitted. In applications of over voltage category III: Micro-disconnection.

Voltage DC (V) DC breeaking current (A) H 62 - Maximum DC1 breaking capacity Normally open contacts Voltage DC (V) DC breaking current (A) H 62 - Maximum DC1 breaking capacity Changeover contacts Cycles  When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100·10 can be expected.  In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time of the load will be increased. contacts in series contacts in series 20 60 100 140 180 220 0.1 (V)260 20 60 100 140 180 220 260 0.1 (V) Voltage DC (V) DC breeaking current (A) H 62 - Maximum DC breaking capacity 62.31.9.xxx.4800 Voltage DC (V) DC breaking current (A) H 62 - Maximum DC breaking capacity 62.32.9.xxx.4800  When switching a resistive load (DC1), or a DC13 load with a diode in parallel to the load, having voltage and current values under the DC1 curve, an electrical life of ≥ 100·10³ can be expected. Note: the release time for the load will be increased.  When switching a DC13 load without a diode in parallel to the load, the DC13 curve applies and an electrical life of ≥ 80·10³ can be expected. Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 II-2015, www.findernet.com A L/R = 40 ms DC1 DC13 L/R = 40 ms

II-2015, www.findernet.com SERIE S 62 Series - Power relays 16 A A Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN (50Hz) V V V Ω mA 6 8.006 5.1 6.6 4 540 12 8.012 10.2 13.2 14 275 24 8.024 20.4 26.4 62 130 48 8.048 40.8 52.8 220 70 60 8.060 51 66 348 55 110 8.110 93.5 121 1,200 30 120 8.120 106 137 1,350 24 230 8.230 196 253 5,000 14 240 8.240 204 264 6,300 12.5 400 8.400 340 440 14,700 7.8 Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN V V V Ω mA 6 9.006 5.1 6.6 12 500 12 9.012 10.2 13.2 48 250 24 9.024 20.4 26.4 192 125 48 9.048 40.8 52.8 770 63 60 9.060 51 66 1,200 50 110 9.110 93.5 121 4,200 26 125 9.125 106 138 5,200 24 220 9.220 187 242 17,600 12.5 Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN V V V Ω mA 6 9.006 4.8 6.6 28 214 12 9.012 9.6 13.2 110 109 24 9.024 19.2 26.4 445 54 48 9.048 38.4 52.8 1,770 27 60 9.060 48 66 2,760 21.7 110 9.110 88 121 9,420 11.7 125 9.125 100 138 12,000 10.4 220 9.220 176 242 37,300 5.8 Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN (50Hz) V V V Ω mA 6 8.006 4.8 6.6 4.6 367 12 8.012 9.6 13.2 19 183 24 8.024 19.2 26.4 74 90 48 8.048 38.4 52.8 290 47 60 8.060 48 66 450 37 110 8.110 88 121 1,600 20 120 8.120 96 132 1,940 18.6 230 8.230 184 253 7,250 10.5 240 8.240 192 264 8,500 9.2 400 8.400 320 440 19,800 6 AC version dataDC version data Coil specifications DC (NO/nPST-NO) version data - ≥ 3 mm AC (NO/nPST-NO) version data - ≥ 3 mm Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN V V V Ω mA 6 9.006 5.1 6.6 28 214 12 9.012 10.2 13.2 110 109 24 9.024 20.4 26.4 445 54 48 9.048 40.8 52.8 1,770 27 60 9.060 51 66 2,760 21.7 110 9.110 93.5 121 9,420 11.7 125 9.125 106 138 12,000 10.4 220 9.220 154* 242 37,300 5.8 DC (NO/nPST-NO) magnetic blow version - > 2.1 mm or > 4.2 mm * Special version with Umin = 70 % UN

II-2015, www.findernet.com A 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. R 62 - DC coil operating range v ambient temperature Normally open contacts 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. R 62 - DC coil operating range v ambient temperature Normally open contacts - magnetic blow version R 62 - AC coil operating range v ambient temperature Normally open contacts Coil specifications R 62 - DC coil operating range v ambient temperature Changeover contacts R 62 - AC coil operating range v ambient temperature Changeover contacts 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.

Type 62.22 62.22-0300 Type 62.23 62.23-0300 Type 62.2x Type 62.2x-0300 Type 62.32 62.32-0300 Type 62.33 62.33-0300 Type 62.3x Type 62.3x-0300 Type 62.31-4800 Type 62.32-4800 Type 62.82 62.82-0300 Type 62.83 62.83-0300 Type 62.8x Type 62.8x-0300 II-2015, www.findernet.com SERIE S 62 Series - Power relays 16 A A

Sheet of marker tags for 62 series relays, plastic, 72 tags, 6x12 mm 060.72 060.72 II-2015, www.findernet.com A 062.10 062.10 with relay 062.60 062.60 with relay 062.10 with relay 062.60 062.10 062.60 with relay 062.05 062.05 with relay 062.05 062.05 with relay 062.07 062.07 with relay 062.07 062.07 with relay 062.08 062.08 with relay 062.08 062.08 with relay

SERIE S 92 Series - Sockets and accessories for 62 series relays A II-2015, www.findernet.com 92.03 Approvals (according to type): Screw terminal (Box clamp) socket 92.03 92.03.0 panel or 35 mm rail (EN 60715) mount Blue Black For relay type 62.31, 62.32, 62.33 Accessories Metal retaining clip (supplied with socket - packaging code SMA) 092.71 Identification tag 092.00.2 Modules (see table below) 99.02 Timer modules (see table below) 86.00, 86.30 Technical data Rated values 16 A - 250 V Dielectric strength 6 kV (1.2/50 μs) between coil and contacts Protection category IP 20 Ambient temperature °C –40…+70 (see diagram L92) Screw torque Nm 0.8 Wire strip length mm 10 Max. wire size for 92.03 socket solid wire stranded wire mm 1x10 / 2x4 1x6 / 2x4 AWG 1x8 / 2x12 1x10 / 2x12 DC Modules with non-standard polarity (+A2) on request. 99.02 coil indication and EMC suppression modules for 92.03 socket 86 series timer modules Multi-voltage: (12…240)V AC/DC; Approvals (according to type): Approvals (according to type): 86.00 99.02 86.30 Rated current (A) L 92 - Rated current vs ambient temperature

(according to type): Approvals (according to type): PCB socket 92.13 (blue) 92.13.0 (black) For relay type 62.31, 62.32, 62.33 Accessories Metal retaining clip (supplied with socket - packaging code SMA) 092.54 Technical data Rated values 10 A - 250 V Dielectric strength 2.5 kV AC Ambient temperature °C –40…+70 Panel mount solder socket mounted with M3 screw 92.33 (blue) For relay type 62.31, 62.32, 62.33 Accessories Metal retaining clip (supplied with socket - packaging code SMA) 092.54 Technical data Rated values 10 A - 250 V Dielectric strength 2.5 kV AC Ambient temperature °C –40…+70 62.3x plug on 92.13 is 63.3 mm high How to code and identify retaining clip and packaging options for sockets. Example: 0 3 . 9 2 Packaging code A Standard packaging Without retaining clip SM Metal retaining clip S M A 0 3 . 9 2 92.13 92.33 A

92 Series - Sockets and accessories for 62 series relays

II-2015, www.findernet.com