01UT-5A BELIMO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Technical data sheet 01UT-5.. www.belimo.com 01UT-5.. • en-us • 2019-08-20 • Subject to change 1 / 3 Outside Temperature Sensor For measuring temperature in outdoor areas. Typical applications at cold stores, greenhouses, production plants and warehouses. NEMA 4X / IP65 rated enclosure. Type Overview Type Output signal passive temperature 01UT-5A Pt100 01UT-5B Pt1000 01UT-5E Ni1000 (JCI) 01UT-5L NTC10k2 01UT-5M NTC10k3 01UT-5Q NTC20k Technical Data Electrical Data Electrical connection Removable spring loaded terminal block max. 2.5 mm² Cable entry Cable gland with strain relief Ø6...8 mm (1/2" NPT conduit adapter included) Functional Data Output signal passive temperature Pt100 Pt1000 Ni1000 (JCI) NTC10k2 NTC10k3 NTC20k Application air Measuring Data Measuring values temperature Accuracy temperature passive passive sensors depending on used type Materials Cable gland PA6, black Mounting plate Lexan, gray RAL7001 Housing cover: lexan, gray base: lexan, gray seal: 0467 NBR70, black UV resistant
Technical data sheet 01UT-5.. www.belimo.com 01UT-5.. • en-us • 2019-08-20 • Subject to change 2 / 3 Safety Data Ambient humidity max. 95% r.H., non-condensing Housing surface temperature max. 195°F [90°C] Protection class IEC/EN III safety extra-low voltage (selv) Protection class UL UL Class 2 Supply EU Conformity CE Marking Certification IEC/EN IEC/EN 60730-1 Certification UL cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1:02/-2-9 Degree of protection IEC/EN IP65 Degree of protection NEMA/UL NEMA 4X Quality Standard ISO 9001 Safety Notes This device has been designed for use in stationary heating, ventilation and air-conditioning systems and must not be used outside the specified field of application. Unauthorised modifications are prohibited. The product must not be used in relation with any equipment that in case of a failure may threaten humans, animals or assets. Ensure all power is disconnected before installing. Do not connect to live/operating equipment. Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied during installation. The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed. Remarks Due to self-heating with 2 wire passive sensors, the supply wire current affects the measurement accuracy, so it should not exceed 1 mA. When using lengthy connecting cables (depending on the cross section used), the cable resistance must be taken into account. The lower the impedance of the sensor used, the greater the effect of the line resistance on the measurement, because it generates an offset. Scope of delivery Scope of delivery Description Type Mounting plate S housing A-22D-A09 Dowel Screws 1/2" NPT conduit adapter General Remarks Concerning Sensors
Technical data sheet 01UT-5.. www.belimo.com 01UT-5.. • en-us • 2019-08-20 • Subject to change 3 / 3 Wiring Diagram Dimensions Dimensions Type Weight 01UT-5A 0.26 lb [0.12 kg] 01UT-5B 0.26 lb [0.12 kg] 01UT-5E 0.26 lb [0.12 kg] 01UT-5L 0.26 lb [0.12 kg] 01UT-5M 0.26 lb [0.12 kg] 01UT-5Q 0.26 lb [0.12 kg]