X40430 overview
X40430 is a component documented by Renesas Technology Corp. The PDF description identifies it as "4Kbit EEPROM Triple Voltage Monitor with Integrated CPU Supervisor May 24, 2006." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Renesas Technology Corp
- Part number: X40430
- Category: Memory
- Datasheet length: 26 Pages
Key features noted in the PDF
- Monitoring voltages: 5V to 9V
- Independent core voltage monitor
- Triple voltage detection and reset assertion —Standard reset threshold settings. See selec- tion table on page 2. —Adjust low voltage reset threshold voltages using special progra.
- Fault detection register
- Selectable power-on reset timeout
- Selectable watchdog timer interval (25ms, 200ms, 1.4s or off)
- Debounced manual reset input
Applications listed in the PDF
- Communication equipment —Routers, hubs, switches —Disk arrays, network storage
- Industrial systems —Process control —Intelligent instrumentation
- Computer systems —Computers —Network servers
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Manufacturer or author: Renesas PDF pages: 26 FN8251 Rev 1.00 May 24, 2006 FN8251 Rev 1.00 May 24, 2006 X40430, X40431, X40434, X40435 4Kbit EEPROM Triple Voltage Monitor with Integrated CPU Supervisor DATASHEET Monitoring voltages: 5V to.
- See selec- tion table on page 2. —Adjust low voltage reset threshold voltages using special programming sequence —Reset signal valid to V CC = 1V —Monitor three separate voltages Fault detection register Selectable power-on reset timeout S.
- A second and third volt- age monitor circuit tracks the unregulated supply to provide a power fail warning or monitors different power supply voltage.
- 2V 2 M O N V2 Voltage Monitor Input.
- active until the V2MON drops below 1V (V2MON falling).
- active until the V3MON drops below 1V (V3MON falling).
- For example, if the present V TRIPx is 2.9 V and the new VTRIPx is 3.2 V, the new voltage can be stored directly into the V TRIPx cell.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
- DESCRIPTION
- Ordering Information
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the X40430 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=x40430-renesas-technology-corp