BSU-1.8S1R0 overview
BSU-1.8S1R0 is a component documented by Bellnix Co.,Ltd. The PDF description identifies it as "High-Efficiency 關Module Non-Isolated POL DC-DC Converter." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bellnix Co.,Ltd.
- Part number: BSU-1.8S1R0
- Category: IC
- Datasheet length: 20 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- OUTPUT VOLTAGE SETTING** High-Efficiency μModule Non-Isolated POL DC-DC Converter BSU-1.8S1R0 Bellnix DC-DC Converter (E) BDD20171019 ELECTRICAL SPECIFICATIONS: CAUTION: Do not operate at or near absolute maximum rating listed for extended.
- The test board size is 30mm× 30mm× 1.6mm with 2 layers, 1oz.
- Test Board Information: 30mm× 30mm×1 .6mm, 4 layers 2Oz .
- The output ripple and transient response measurement is short loop probing and 20MHz bandwidth limited.
- Vin = 3.3V, Vout = 1.8V, unless otherwise specified.
- Unit Input Characteristics ISD(IN) Input shutdown current Vin = 3.3V, EN = GND - 0.3 1 uA I(IN) Input supply current Vin = 3.3V, Iout = 0A EN = VIN Vout = 1.8V - 75 - uA IS(IN) Input supply current Vin = 3.3V, EN = VIN - - - Iout = 5mA V.
- Unit Control Characteristics VREF Referance voltage 0.588 0.6 0.612 V FOSC Oscillator frequency PWM Operation - 3.0 - M Hz VEN_TH Enable rising threshold voltage 1.5 - - V Enable falling threshold voltage - - 0.4 V Fault Protection VUV.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BSU-1.8S1R0 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=bsu-1-8s1r0-bellnix-co-ltd