TPS1191RB-2-TR overview
TPS1191RB-2-TR is a component documented by STANLEY ELECTRIC CO.,LT. The PDF description identifies it as "Lead?밼ree soldering compatible." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: STANLEY ELECTRIC CO.,LT...
- Part number: TPS1191RB-2-TR
- Category: IC
- Datasheet length: 20 Pages
Key features noted in the PDF
- Cleaning 2. Warrant period 3. Handling after opened Handling Precaution ① Some chemicals, including Freon substitute detergent could corrode the lens or the casing surface, which.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- ① Photo Transistor Si 1 ② Encapsulant Epoxy Resin 1 ③ Substrate Glass Fabrics 1Outline Dimensions Recommended Pad Unit ：mm Weight ：6.6mg Tolerance：±0.1 Unit：mm Collector Polarity Mark Emitter 2017/10/9 Page 2 (Ta=25℃) (Ta=25℃) VCEO＝10V ICE.
- 2.6 μs Longitudinal direction TYP.
- Response time Peak sensitivity wavelength Collector-emitter saturation voltage ☆☆VCE＝10V Ic=2mA,Rl=100Ω Angle of sensitivity ⊿θ Unit Iｃ mAVCE=5V ☆Ee=5mW/c㎡ Item Dark current Photo current CharacteristicsSymbolConditions Power dissipation P.
- B 0.7 1.4 C 1.2 2.4 Ranks Ic(mA) Conditions VCE=5V Ee=5mW/c㎡ Ta=25℃ Radiant Intensity rank of shipped device might be any rank of above 2 ranks(B,C).
- Specifications Radiant Intensity Rank 2017/10/9 Page 4 Condition : Ta = 25℃ VCE＝5V Spectral Distribution Condition : Ta = 25℃ VCE＝5V Wavelength: (nm) Irradiance vs.
- Relative photo current Condition : VCE＝５V Irradiance ：Ee（mW/c㎡） Collector-emitter voltage vs.
- Photo current Condition : Ta=25℃ Collector-emitter voltage VCE(V) Relative radiant intensity: (%) Standard: Ee=5mW/c㎡ Standard tungsten (2,856K) lamp used.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Check voltage, continuous and pulsed current, safe operating area and junction-temperature limits.
- Evaluate conduction and switching losses using the specified drive conditions rather than headline ratings.
- Confirm pinout, package thermal path, gate or base protection and transient derating in the final circuit.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TPS1191RB-2-TR datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tps1191rb-2-tr-stanley-electric-co-lt