TP65H070G4PS overview

TP65H070G4PS is a component documented by Transphorm Inc. The PDF description identifies it as "650V SuperGaN® GaN FET in PQFN (source tab) Dec. 4, 2023." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Transphorm Inc
  • Part number: TP65H070G4PS
  • Category: IC
  • Datasheet length: 12 Pages

Key features noted in the PDF

  • Gen IV technology
  • JEDEC-qualified GaN technology
  • Dynamic RDS(on)eff production tested
  • Robust design, defined by — Wide gate safety margin — Transient over-voltage capability
  • Very low QRR
  • Reduced crossover loss
  • RoHS compliant and Halogen-free packaging Benefits

Applications listed in the PDF

  • Broad industrial
  • PV inverter
  • Servo motor
  • Computing
  • Consumer

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • In off-state, spike duration < 30µs, non-repetitive b.
  • 4, 2023 transphormusa.com tp65h070g4ps.2v1 3 TP65H070G4PS Circuit Implementation Recommended gate drive: (0V, 12V) with RG= 50Ω Simplified Half-bridge Schematic ( See also on Figure 13 ) Required DC Link RC Snubber (RCDCL) (d) Recommended.
  • RCSN (68pF + 15Ω) is needed only if RG is smaller than recommendations For additional gate driver options/configurations, please see Layout Recommendations Gate Loop: Gate Driver: SiLab Si823x/Si827x Keep gate loop compact Minimize couplin.
  • Equivalent capacitance to give same stored energy as VDS rises from 0V to 400V h.
  • Equivalent capacitance to give same charging time as VDS rises from 0V to 400V Dec.
  • Safe Operating Area TC=25°C Figure 14.
  • Inductive Switching Loss TC=25°C** Dec.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Applications
  • Description
  • Ordering Information

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the TP65H070G4PS datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=tp65h070g4ps-transphorm-inc

TP65H070G4PS Transphorm Inc IC TP65H070G4PS datasheet TP65H070G4PS specifications TP65H070G4PS applications