TFS225E overview
TFS225E is a component documented by Vectron International,. The PDF description identifies it as "Filter specification." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Vectron International, ...
- Part number: TFS225E
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedances at fc *: input: 940 Ω // -5,7 pF output: 940 Ω // -5,7 pF Characteristics Remark: The reference level for the relativ e attenuation arel of TF.
- The centre frequency fc is the arithmetic mean value of the upper and low er frequencies at the 1 dB filter attenuation lev el relative to the insertion loss ae.
- The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below, even if the centre frequency fc is shifted due to the temper ature coefficient of frequency TCf in the operati.
- Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2.
- Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3.
- Change of temperature: -55 °C to 125°C / 30 min.
- pieces of filters per reel: 3000 reel of empty components at start: min 300 mm reel of empty components at start including leader: min 500 mm trailer min 300 mm D o Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo A o D 1 Tape (all dimen.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TFS225E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tfs225e-vectron-international