TFS225E

TFS225E VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Filename: tfs225e.doc version 1.2 25.04.2003 VI TELEFILTER Filter specification TFS 225E 1/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedances at fc *: input: 940 Ω // -5,7 pF output: 940 Ω // -5,7 pF Characteristics Remark: The reference level for the relativ e attenuation arel of TFS 225E is the minimu m of the pass band attenuation a min. This value is defined as the insertion loss a e. The centre frequency fc is the arithmetic mean value of the upper and low er frequencies at the 1 dB filter attenuation lev el relative to the insertion loss ae. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below, even if the centre frequency fc is shifted due to the temper ature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. D a t a typ. value limit Insertion loss ae = amin 6,5 dB min. 4,5 dB max. 8 dB Nominal frequency fN - 225 MHz Centre frequency fc 225 MHz - Relative attenuation arel fN - 0,2 MHz ... fN + 0,2 MHz 0,5 dB max. 1 dB fN ± 0,6 kHz ... fN ± 1,2 MHz 15 dB min. 8 dB fN ± 1,2 MHz ... fN ± 1,8 MHz 27 dB min. 20 dB 1 MHz ... fN - 1,8 MHz 35 dB min. 30 dB fN + 1,8 MHz ... fN + 7 MHz 35 dB min. 30 dB fN + 7 MHz ... 1 GHz 52 dB min. 45 dB Group delay ripple in fN - 200 kHz ... fN + 200 kHz 85 ns max. 350 ns Operating temperature range - - 20 °C...+ 80 °C Storage temperature range - - 35 °C.. + 85 °C Temperature coefficient TC ** - 0,04 ppm/K² - Frequency inversion temperature T0 35 °C - Input power level - max. + 10 dBm *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team **) ∆f(Hz) = TCf(ppm/K) x (T-T0)² x fTo(MHz) generated: checked / approved:

Filename: tfs225e.doc version 1.2 25.04.2003 VI TELEFILTER Filter specification TFS 225E 2/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Construction and pin connection (All dimensions in mm) 9,3 Max. 5,0Max. 1 2 3 678 101,8 Max. 7,1 2,54 ±0,1 0,10 0,8 2,8 2,54 ±0,12,54 ±0,1 60° 1 2 3 678 TFS 225 E R17 Date code 1 ground 2 ground 3 ground 4 output 5 output rf return 6 ground 7 ground 8 ground 9 input 10 input rf return date code year + week N 2001 P 2002 R 2003 ... 50 Ω test circuit SAW 4 9 Output

50 Ohm

Filename: tfs225e.doc version 1.2 25.04.2003 VI TELEFILTER Filter specification TFS 225E 3/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min 300 mm reel of empty components at start including leader: min 500 mm trailer min 300 mm D o Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo A o D 1 Tape (all dimensions in mm) W : 16 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,1 E : 1,75 ± 0,1 F : 7,5 ± 0,1 G (min) : 0,60 P2 : 2 ± 0,1 P1 : 8 ± 0,1 D1(min) : 1,5 Ao : 5,30 ± 0,1 Bo : 9,70 ± 0,1 CT CT : 13,5 ± 0,1 A C N W 1 W 2 Reel (all dimensions in mm): A : 330 W 1 : 16,40 +2,0 W 2 (max) : 22,4 N (min) : 50 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.

Filename: tfs225e.doc version 1.2 25.04.2003 VI TELEFILTER Filter specification TFS 225E 4/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air reflow temperature conditions 1st and 2nd air reflow profile Name: pre-heating periods main-heating periods peak temperature T emperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C T ime: 60 sec. - 90 sec. 20 sec. - 25 sec. Chip-mount air reflow profile time / sec. temperature / °C 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120

Filename: tfs225e.doc version 1.2 25.04.2003 VI TELEFILTER Filter specification TFS 225E 5/5 TELEFILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. History Version Reason of Changes Name Date 1.0 - generate specification Pfeiffer 13.09.2002 1.1 - terminating impedance added (preliminary values) Pfeiffer 07.02.2003 - typical values added 1.2 - terminating impedance fixed Pfeiffer 25.04.2003