TCS34727 overview
TCS34727 is a component documented by ams AG. The PDF description identifies it as "Red, Green, Blue (RGB), and Clear Light." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ams AG
- Part number: TCS34727
- Category: IC
- Datasheet length: 40 Pages
Applications listed in the PDF
- RGB LED backlight control
- Light color temperature measurement
- Ambient light sensing for display backlight control
- Fluid and gas analysis
- Product color verification and sorting End Products and Market Segments
- TVs, mobile handsets, tablet s, computers, and monitors
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Communication of the TCS3472 data is accomplished over a fast, up to 400 kHz, two-wire I²C serial bus.
- Functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied.
- Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
- The actual time can be calculated as follows: ATIME = 256 − Integration Time / 2.4 ms Inversely, the time can be calculated from the register value as follows: Integration Time = 2.4 ms × (256 − ATIME) For example, if a 100-ms integration.
- A minimum interval of 2.4 ms must pass after PON is asserted before an RGBC can be initiated.
- Dime nsion tolerance is ±20 μm unless otherwise noted.
- The die is centered within the package within a tolerance of ± 3 mils.
Topics covered by the datasheet
The document includes sections related to:
- TCS3472_17 AMSCO
- Applications
- Ordering Information
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TCS34727 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tcs34727-ams-ag