TA0102A overview
TA0102A is a component documented by Tripath Technology Inc. The PDF description identifies it as "STEREO 150W (4?? CLASS-T DIGITAL AUDIO AMPLIFIER DRIVER USING DIGITAL POWER PROCESSING (DPPTM) TECHNOLOGY." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Tripath Technology Inc.
- Part number: TA0102A
- Category: Amplifier
- Datasheet length: 12 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Damage will occur to the device if VN12 is not supplied or falls below the recommended operating voltage when VS is within its recommended operating range.
- U N ITS VS Supply Voltage (Vspos & Vsneg) +/-28 +/-49 V V5 Positive 5V Bias Supply 4.5 5 5.5 V VN12 Supply Voltage: Nominal +12V referenced to V SNEG 10.8 12 13.2 V Note: Operating Conditions indicate conditions for which the device is fun.
- Unless otherwise specified, TA = 25°C.
- 3.1/06.01 Performance Characteristics – Single Ended, Vs = +45V Unless otherwise specified, f = 1kHz, Measurement Bandwidth = 22kHz.
- U N ITS POUT Output Pow er (Continuous Average/Channel) THD+N = 0.1% R L = 8Ω R L = 4Ω THD+N = 1% R L = 8Ω R L = 4Ω 130 100 170 W W W W THD + N Total Harmonic Distortion Plus Nois e PO = 20W/Channel, RL = 8Ω 0.05 % IHF-IM IHF Intermodulati.
- U N ITS POUT Output Pow er (Continuous Average/Channel) THD+N = 0.1% R L = 8Ω R L = 4Ω THD+N = 1% R L = 8Ω R L = 4Ω 110 W W W W THD + N Total Harmonic Distortion Plus Nois e PO = 20W/Channel, RL = 8Ω 0.05 % IHF-IM IHF Intermodulation Disto.
- VN12 must be a stable 12V above VSNEG.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Electrical Characteristics
- Application Information
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TA0102A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ta0102a-tripath-technology-inc