SPD30P6PG overview
SPD30P6PG is a component documented by EVER SEMICONDUCTOR CO.,. The PDF description identifies it as "60V P-Channel MOSFET Rev:2023A2." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: EVER SEMICONDUCTOR CO.,...
- Part number: SPD30P6PG
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Characteristics Thermal resistance, junction - case RthJC 1.2 K/W Thermal resistance, junction - ambient, leaded RthJA 100 SMD version, device on PCB: @ min.
- footprint @ 6 cm 2 cooling area 1) RthJA Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Values Unit min.
- Static Characteristics Drain- source breakdown voltage VGS = 0 V, ID = -250 µA V(BR)DSS -60 V Gate threshold voltage, VGS = VDS ID = -1.7 mA VGS(th) -2.1 -3 -4 Zero gate voltage drain current VDS = -60 V, V GS = 0 V, Tj = 25 °C VDS = -60 V.
- Q gs 3.7 5.6 nC Q gd 13.8 20.7 Dynamic Characteristics Gate to source charge VDD = -48 V, ID = -30 A Gate to drain charge VDD = -48 V, ID = -30 A Gate charge total Q g 48 VDD = -48 V, ID = -30 A, VGS = 0 to -10 V Gate plateau voltage VDD =.
- Reverse Diode Inverse diode continuous forward current TC = 25 °C IS -30 A Inverse diode direct current,pulsed TC = 25 °C ISM -120 Inverse diode forward voltage VGS = 0 V, IF = -30 VSD -1.3 -1.7 V Reverse recovery time VR = -30 V, IF=IS.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SPD30P6PG datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=spd30p6pg-ever-semiconductor-co