SMT40C2-00SADJJ overview
SMT40C2-00SADJJ is a component documented by Artesyn Technologies. The PDF description identifies it as "C-Class Non-Isolated." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Artesyn Technologies
- Part number: SMT40C2-00SADJJ
- Category: IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- TBD CB report and certificate to IEC60950 Electrical Specifications Input Input voltage ra nge 4.5 - 13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 25 A @ lo max.
- Start-up time Remote ON/OFF 3 ms Output Output voltage See Note 5 0.6 - 5 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min.
- load 0 A/40 A Overshoot At turn-on 0.5% max.
- Undershoot At turn-off 100 mV max.
- Ripple and noise Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max.
- deviation 50 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 20 A 94% Switching frequency Fixed 500 kHz Material flammability UL94V-0 Weight 17 g (0.06 oz.) MTBF 12 V @ 40 °C, 100% load Bel.
- The output voltage can be trimmed in a range of 0.6-5 V.
Topics covered by the datasheet
The document includes sections related to:
- SIL40C2-00SADJ-VJ_15 ARTESYN
- Ordering Information
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SMT40C2-00SADJJ datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=smt40c2-00sadjj-artesyn-technologies