SIL40C2-00SADJ-VJ_15 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Total Power: 40 Amps Input Voltage: 4.5 - 13.8 Vdc # of Outputs: Single SPECIAL FEATURES 40 A current rating Input voltage range: 4.5 - 13.8 Vdc Output voltage: 0.6 - 5 V Industry-leading value Cost optimized design Excellent transient response Output enable Output voltage adjustability Supports silicon voltage migration Reduced design-in and qual time RoHS compliant SAFETY UL, cUL CAN/CSA 22.2 No. E139421 UL6950 File No. TBD TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to IEC60950 Electrical Specifications Input Input voltage ra nge 4.5 - 13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 25 A @ lo max. Start-up time Remote ON/OFF 3 ms Output Output voltage See Note 5 0.6 - 5 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/40 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise
5 Hz to 20 MHz
Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 50 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 20 A 94% Switching frequency Fixed 500 kHz Material flammability UL94V-0 Weight 17 g (0.06 oz.) MTBF 12 V @ 40 °C, 100% load Bellcore 332 6,749,409 hours Coplanarity Surface mount models 150 μm Data Sheet
SIL/SMT40C2 Series Data Sheet Environmental Specifications Thermal performance Operating ambient temperature -0 °C to +70 °C See Note 5 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Output Voltage Adjustment The ultra-wide output voltage trim range offers major advantages to users who select the SIL40C2 series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.6-5 V. When the SIL40C2 converter leaves the factory, the output has been adjusted to the default voltage of 0.6 V.
Ordering Information
Number (3,5) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load Notes: 1. Measured as per recommended system capacitance. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to full lo and full lo to 0.75. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.Artesyn.com/power to find a suitable alternative. 9. To order a Horizontal Mounting option with a pin length of 0.165”, please use model SIL40C2-00S-HP5. Part Number System with Options SIL 40 C 2 - 00 SADJ - V J Product Family SIL = Single In Line SMT = Surface Mount Output Voltage Single Adjustable Output Performance C = Cost Optimized Input Voltage 00 = 4.5 - 13.8 V Generation Blank = Standard 2 = Increased current density RoHS Compliance J = Pb free (RoHS 6/6 compliant) Mounting Option V = Vertical H = Horizontal (Applicable to SIL version only) Rated Output Current 06 = 6 Amp 15 = 15 Amp 20 = 20 Amp 30 = 30 Amp 40 = 40 Amp Standard Application Drawing 7,8 10,11 1,2,3 SIL40C2 Enable Vin GND R trim (for trim down) C out R L O A D Power Good Vout +R sense C in
SIL/SMT40C2 Series Data Sheet Mechanical Drawings 0.100 (2.54) 1.050 (26.67)
9 PLACES
1.100 (27.94) 1.200 (30.48) 0.050 (1.27) REF 0.140 (3.56) TYP PIN 1 0.050 (1.27) TYP 0.255 (6.48) 0.110 (2.79) 0.427 (10.85) 0.025 (0.64) ±.001 SQ PINS TYP 0.062 (1.57) REF 0.100 (2.54) TYP 1.100 (27.94) 1.200 (30.48) PIN 1 0.255 (6.48) 0.110 (2.79) REF 0.468 (11.89) 0.062 (1.57) REF .150 (3.81) TYP 0.025 (0.64) ±.001 SQ PINS TYP
13 PLACES
2X 1.050 (26.67) 0.100 (2.54) REF 0.050 (1.27) REF 1.000 (25.40) 0.050 (1.27) 0.100 (2.54) TYP
SIL/SMT40C2 Series Data Sheet WORLDWIDE OFFICES Americas 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. SIL/SMT40C2 Series 08Oct2015 Mating Connectors Mechanical Drawings 1.100 (27.94) 1.200 (30.48) PIN 1 0.255 (6.48) 0.110 (2.79) REF 0.442 (11.23) 0.062 (1.57) REF 0.125 (3.18) TYP 2X 1.050 (26.67) 0.100 (2.54) REF 0.050 (1.27) REF 1.000 (25.40) 0.050 (1.27) 0.100 (2.54) TYP
1 Vout
2 Vout
3 Vout
4 Trim
5 Enable
6 Power Good
7 Ground
8 Ground
9 (+) Sense