SFX-800G overview
SFX-800G is a component documented by Connor-Winfield Corpora. The PDF description identifies it as "Synchronous Clock Generators." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Connor-Winfield Corpora...
- Part number: SFX-800G
- Category: IC
- Datasheet length: 8 Pages
Key features noted in the PDF
- Available as a 3.3V High Precision PLL
- Eight User Selectable PECL Output Frequencies
- Jitter Generation OC-192 Compliant
- 1.2” x 1.0” x 0.285”, Surface Mount
- ROHS Compliant PLL
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- It is AC coupled and loaded with a 180 Ω resistor to ground.
- 3.0: VCO calibration occurs with each power-up and with each new output frequency selection.
- Without a proper VCO calibration sequence, the unit will not lock and the output frequency could vary substantially from nominal.
- Typical v alues would be 10 uF , 0.1 uF , 100 pF .
- LOR (Loss of Reference) When the external reference is <= 1MHz, LOR is LOW When the external reference is > 1MHz, LOR is HIGH LD (Lock Detect) When the Phase Detector Error is <= 7ns (typ) for 5 cycles, LD is HIGH After LD is HIGH, it will.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Ordering Information
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SFX-800G datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sfx-800g-connor-winfield-corpora