SD06 overview
SD06 is a component documented by SG Micro Corp. The PDF description identifies it as "960μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifier August 31, 2015." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SG Micro Corp
- Part number: SD06
- Category: Amplifier
- Datasheet length: 12 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The SD06 has a high gain- bandwidth product of 6MHz, a slew rate of 3.7V/μs, and a quiescent current of 960μA at 5V.
- The input common mode voltage range includes ground, and the maximum input offset voltage is 3.5mV for SD06.
- The operating range is from 2V to 5.5V.
- Cellular and Cordless Phones Laptops and PDAs Photodiode Amplification Battery-Powered Instrumentation Rail-to-Rail Input and Output 0.9mV Typical VOS High Gain-Bandwidth Product: 6MHz High Slew Rate: 3.7V/μs Settling Time to 0.1%.
- Exposure to absolute maximum rating conditions for extended periods may affect reliability.
- Frequency Channel Separation vs.
- Load Capacitance 10 100 1000 Load Capacitance (pF) Small-Signal Overshoot (%) VS = 2V RL = 10kΩ TA = +25℃ G = 1 10 100 1000 Load Capacitance (pF) Small-Signal Overshoot (%) VS = 5V RL = 10kΩ TA = +25℃ G = 1 Output Impedance vs.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
- FEATURES
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
- PACKAGE INFORMATION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SD06 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sd06-sg-micro-corp