SD06

SD06 SGMICRO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

960μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifier August 31, 2015 SG Micro Corp www.sg-micro.com PRODUCT DESCRIPTION The SD06 is a low noise, low voltage, and low power operational amplifier that can be designed into a wide range of applications. The SD06 has a high gain- bandwidth product of 6MHz, a slew rate of 3.7V/μs, and a quiescent current of 960μA at 5V. The SD06 is designed to provide optimal performance in low voltage and low noise system. It provides rail-to-rail output swing into heavy load. The input common mode voltage range includes ground, and the maximum input offset voltage is 3.5mV for SD06. The operating range is from 2V to 5.5V. The SD06 is available in Green SOIC-8 package. It is specified over the extended industrial temperature range (-40℃ to +125℃).

APPLICATIONS

Cellular and Cordless Phones Laptops and PDAs Photodiode Amplification Battery-Powered Instrumentation

FEATURES

 Rail-to-Rail Input and Output 0.9mV Typical VOS  High Gain-Bandwidth Product: 6MHz  High Slew Rate: 3.7V/μs  Settling Time to 0.1% with 2V Step: 0.5μs  Overload Recovery Time: 0.9μs  Low Noise: 13nV/ Hz at 1kHz  Supply Voltage Range: 2V to 5.5V  Input Voltage Range: -0.1V to +5.6V with VS = 5.5V  Low Supply Current: 960μA (TYP)  Available in Green SOIC-8 Package PIN CONFIGURATION (TOP VIEW) OUTA +INA OUTB +VS +INB5 -INA -VS -INB SOIC-8

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com PACKAGE/ORDERING INFORMATION MODEL PACKAGE

DESCRIPTION

SD06 SOIC-8 -40℃ to +125℃ SD06/TR SD06 XXXXX Tape and Reel, 2500 NOTE: XXXXX = Date Code and Vendor Code. Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb -Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS Input Common Mode Voltage Range Package Thermal Resistance @ TA = 25℃ Lead Temperature (Soldering 10sec) ESD Susceptibility RECOMMENDED OPERATING CONDITIONS OVERSTRESS CAUTION Stresses beyond those listed may cause permanent damage to the device. Functional operat ion of the device at these or any other conditions beyond those indicated in the operational section of the spec ification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. ESD SENSITIVITY CAUTION This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DISCLAIMER SG Micro Corp reserves the ri ght to make any change in circuit design, specification or other related things if necessary without notice at any time.

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com

ELECTRICAL CHARACTERISTICS

(At TA = +25℃, VS = +5V, VCM = VS/2, RL = 600Ω, unless otherwise noted.) SD06 TYP MIN/MAX OVER TEMPERATURE PARAMETER CONDITIONS +25℃ +25 ℃ -40℃ to +85℃ -40℃ to +125℃ UNITS MIN/ MAX INPUT CHARACTERISTICS Input Offset Voltage (VOS) 0.9 3.5 3.7 3.8 mV MAX Input Bias Current (IB) 1 pA TYP Input Offset Current (IOS) 1 pA TYP Input Common Mode Voltage Range (VCM) VS = 5.5V -0.1 to 5.6 V TYP VS = 5.5V, VCM = -0.1V to 4V 84 68 67 66 dB MIN Common Mode Rejection Ratio (CMRR) VS = 5.5V, VCM = -0.1V to 5.6V 76 dB MIN RL = 600Ω, VO = 0.15V to 4.85V 92 83 76 60 dB MIN Open-Loop Voltage Gain (AOL) RL = 10kΩ , VO = 0.05V to 4.95V 103 dB MIN Input Offset Voltage Drift (ΔVOS/ΔT) 2.4 μV/℃ TYP OUTPUT CHARACTERISTICS RL = 600Ω 0.079 V TYP Output Voltage Swing from Rail RL = 10kΩ 0.007 V TYP Output Current (IOUT) 51 39 28 22 mA MIN Closed-Loop Output Impedance f = 200kHz, G = 1 5.4 Ω TYP POWER SUPPLY 2 2 2 2 V MIN Operating Voltage Range 5.5 5.5 5.5 5.5 V MAX Power Supply Rejection Ratio (PSRR) VS = 2V to 5.5V, VCM = (-VS) + 0.5V 84 69 68 67 dB MIN Quiescent Current (IQ) I OUT = 0 0.96 1.25 1.45 1.57 mA MAX DYNAMIC PERFORMANCE Gain-Bandwidth Product (GBP) 6 MHz TYP Phase Margin (φO) 63 ° TYP Full Power Bandwidth (BWP) <1% distortion 250 kHz TYP Slew Rate (SR) G=1, 2V output step 3.7 V/ μs TYP Settling Time to 0.1% (tS) G=1, 2V output step 0.5 μs TYP Overload Recovery Time V IN × Gain = VS 0.9 μs TYP NOISE PERFORMANCE Voltage Noise Density (en) f = 1kHz 13 nV/ Hz TYP

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VCM = VS/2, RL = 600Ω, unless otherwise noted. CMRR vs. Frequency PSRR vs. Frequency 100 120 0.01 0.1 1 10 100 1000 Frequency (kHz) CMRR (dB) VS = 5V 100 120 0.01 0.1 1 10 100 1000 Frequency (kHz) PSRR (dB) VS = 5V PSRR+ PSRR- Channel Separation vs. Frequency Channel Separation vs. Frequency 120 150 0.1 1 10 100 1000 Frequency (kHz) Channel Separation (dB) VS = 2V RL = 620Ω TA = +25℃ G = 1 Channel B to A Channel A to B 120 150 0.1 1 10 100 1000 Frequency (kHz) Channel Separation (dB) VS = 5V RL = 620Ω TA = +25℃ G = 1 Channel A to B Channel B to A Closed-Loop Output Voltage Swing Closed-Loop Output Voltage Swing 0.5 1.5 2.5 10 100 1000 10000 Frequency (kHz) Output Voltage (VP-P) VS = 2V VIN = 2VP-P TA = +25℃ RL = 10kΩ G = 1 10 100 1000 10000 Frequency (kHz) Output Voltage (VP-P) VS = 5V VIN = 4.9VP-P TA = +25℃ RL = 10kΩ G = 1

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VCM = VS/2, RL = 600Ω, unless otherwise noted. Small-Signal Overshoot vs. Load Capacitance Small-Signal Overshoot vs. Load Capacitance 10 100 1000 Load Capacitance (pF) Small-Signal Overshoot (%) VS = 2V RL = 10kΩ TA = +25℃ G = 1 10 100 1000 Load Capacitance (pF) Small-Signal Overshoot (%) VS = 5V RL = 10kΩ TA = +25℃ G = 1 Output Impedance vs. Frequency Output Impedance vs. Frequency 100 1 10 100 1000 10000 Frequency (kHz) Output Impedance (Ω) VS = 2V G = 10 G = 1 G = 100 100 1 10 100 1000 10000 Frequency (kHz) Output Impedance (Ω) VS = 5V G = 10 G = 1 G = 100 Large-Signal Step Response Large-Signal Step Response Time (400ns/div) Voltage (1V/div) G = 1 CL = 100pF RL = 10kΩ VS = 2V Time (400ns/div) Voltage (1V/div) G = 1 CL = 100pF RL = 10kΩ VS = 5V

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VCM = VS/2, RL = 600Ω, unless otherwise noted. Small-Signal Step Response Small-Signal Step Response Time (1μs/div) Voltage (50mV/div) G = 1 CL = 100pF RL = 10kΩ VS = 2V Time ((1μs/div) Voltage (50mV/div) G = 1 CL = 100pF RL = 10kΩ VS = 5V Positive overload Recovery Negative Overload Recovery Time (1µs/div) VIN VOUT 50mV/div1V/div VS = 5V VIN = 50mV RL = 620Ω G = -100 Time (1µs/div) VIN VOUT 50mV/div1V/div VS = 5V VIN = 50mV RL = 620Ω G = -100 Output Voltage Swing vs. Output Current Output Voltage Swing vs. Output Current 0 1 02 03 04 05 06 07 08 0 Output Current (mA) Output Voltage (V) Sourcing Current Sinking Current -40℃ +25℃ +125℃ VS = 5V 0.5 1.5 0 5 10 15 20 25 30 35 Output Current (mA) Output Voltage (V) Sourcing Current Sinking Current -40℃ +25℃+125℃ VS = 2V

960μA, 6MHz, Rail-to-Rail I/O SD06 CMOS Operational Amplifier SG Micro Corp www.sg-micro.com TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VCM = VS/2, RL = 600Ω, unless otherwise noted. CMRR vs. Temperature PSRR vs. Temperature 100 110 -50 -25 0 25 50 75 100 125 Temperature (℃) CMRR (dB) VCM = -0.1V to 4V VS = 5.5V VCM = -0.1V to 5.6V 100 110 -50 -25 0 25 50 75 100 125 Temperature (℃) PSRR (dB) VS = 2V to 5.5V Open-Loop Voltage Gain vs. Temperature Open-Loop Voltage Gain vs. Temperature 100 110 120 -50 -25 0 25 50 75 100 125 Temperature (℃) Open–Loop Voltage Gain (dB) VS = 5V RL = 10kΩ VS = 2V 100 110 -50 -25 0 25 50 75 100 125 Temperature (℃) Open–Loop Voltage Gain (dB) VS = 5V RL = 600Ω VS = 2V Input Voltage Noise Spectral Density vs. Frequenc y Offset Voltage Production Distribution 100 1000 10 100 1000 10000 Frequency (Hz) Voltage Noise (nV/√Hz) VS = 5V -4 -3 -2 -1 0 1 2 3 4 Offset Voltage (mV) Percentage of Amplifiers (%)

20300 Samples

1 Production Lot

VS = 5V

PACKAGE INFORMATION

www.sg-micro.com TX00010.000 PACKAGE OUTLINE DIMENSIONS SOIC-8 D EE1 e b A A1 c L θ 1.27 0.6 2.2 5.2 RECOMMENDED LAND PATTERN (Unit: mm) Dimensions In Millimeters Dimensions In Inches Symbol MIN MAX MIN MAX A 1.350 1.750 0.053 0.069 A1 0.100 0.250 0.004 0.010 A2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 D 4.700 5.100 0.185 0.200 E 3.800 4.000 0.150 0.157 E1 5.800 6.200 0.228 0.244 e 1.27 BSC 0.050 BSC L 0.400 1.270 0.016 0.050 θ 0° 8° 0° 8°

www.sg-micro.com TX10000.000 TAPE AND REEL INFORMATION NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Package Type Reel Diameter Reel Width (mm) (mm) (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant DD0001 Reel Width (W1) Reel Diameter REEL DIMENSIONS TAPE DIMENSIONS DIRECTION OF FEED P2 P0 W P1 A0 K0 Q1 Q2 Q4Q3 Q3 Q4 Q2Q1 Q3 Q4 Q2Q1

www.sg-micro.com TX20000.000 CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Reel Type Length (mm) Width (mm) Height (mm) Pizza/Carton 13″ 386 280 370 5 DD0002