OP162DRM-REEL overview
OP162DRM-REEL is a component documented by Analog Devices. The PDF description identifies it as "15 MHz Rail-to-Rail Operational Amplifiers Rev. F." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Analog Devices
- Part number: OP162DRM-REEL
- Category: Amplifier
- Datasheet length: 20 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Wide bandwidth: 15 MHz Low offset voltage: 325 µV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 µV/°C typ High slew rate: 13 V/µs No phase inversion Unity-gain stable The OP.
- The low supply current of 500 µA (typical) is critical for portable or densely packed designs.
- These products operate from single supplies as low as 2.7 V to dual supplies of ±6 V.
- The output drive of 30 mA (sink and source) is needed for many audio and display applications; more output current can be supplied for limited durations.
- The OPx62 family is specified over the extended industrial temperature range (–40°C to +125°C).
- PIN CONFIGURATIONS NULL 1 –IN A 2 +IN A 3 V– 4 NULL8 V+7 OUT A6 NC5 NC = NO CONNECT OP162 TOP VIEW (Not to Scale) 00288-001 **Figure 1.
- D @ VS = 5.0 V , VCM = 0 V , TA = 25°C, unless otherwise noted. **Table 1.
Topics covered by the datasheet
The document includes sections related to:
- OP162_05 AD
- FEATURES
- APPLICATIONS
- REVISION HISTORY
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the OP162DRM-REEL datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=op162drm-reel-analog-devices