MPW2036 overview
MPW2036 is a component documented by Minmax Technology Co.,. The PDF description identifies it as "25-30W, Wide Input Range, Single & Dual Output DC/DC Converters." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Minmax Technology Co., ...
- Part number: MPW2036
- Category: IC
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Range –40°C to +80°C ►Short Circuit Protection ►I/O-isolation 1500 VDC ►Input Filter meets EN 55022,class A and FCC, level A ►3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MPW2000 series is a range of isolated 30W DC/DC converter mo.
- An excellent efficiency allows an operating temperature range of –40° to +80°C (with derating).
- Unit 24V Input Models -0.7 --- 50 Input Surge Voltage (1 sec.
- Unit Output Voltage Setting Accuracy At 50% Load and Nominal Vin --- --- ±1.0 %Vom.
- to Max. --- ±0.2 ±0.5 % Load Regulation Io=50% to 100% --- ±0.3 ±1.0 % Ripple & Noise (20MHz) --- 55 80 mV P-P Transient Recovery Time --- 150 300 μsec Transient Response Deviation 25% Load Step Change --- ±2 ±4 % Temperature Coefficient.
- Unit I/O Isolation Voltage Rated 60 Seconds 1500 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- M Ω I/O Isolation Capacitance 100KHz, 1V --- 1200 1500 pF Switching Frequency 290 330 360 KHz MTBF (calculated) MIL-HDBK-217F@25 ℃.
- Unit Converter On 2.5V ~ 100V or Open Circuit Converter Off -1V ~ 1V or Short Circuit Control Input Current (on) Vctrl = 5.0V --- --- 5 μA Control Input Current (off) Vctrl = 0V --- --- -100 μA Control Common Referenced to Negative Input S.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- FEATURES
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MPW2036 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mpw2036-minmax-technology-co