MAS9280B1TG00 overview
MAS9280B1TG00 is a component documented by Micro Analog systems. The PDF description identifies it as "IC FOR 18.00 - 40.00 MHz VCTCXO." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Micro Analog systems
- Part number: MAS9280B1TG00
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Frequency 40 MHz True Sine Wave Output Frequency Stability +/- 1.5 ppm Suitable Also for Low Pull Crystals Very Low Phase Noise The MAS9280 is an integrated circuit well suited to build VCTCXO for mobile communication.
- Divider function allows the usage of double frequency crystal.
- FEATURES APPLICATIONS Very small size Minimum Vdd 2.4V No voltage reference capacitor needed Phase noise <-110 dBc/Hz at 100 Hz and <-130 dBc/Hz at 1kHz @ 32 MHz crystal Programmable VC-sensitivity Oscillator frequency output f o /2 versio.
- DA9280.003 3 (8) Parameter Symbol Min Typ Max Unit Note Frequency Range f o 18.00 40.00 MHz 1) Voltage Control Range V C 0 VDD V Voltage Control Sensitivity (VCR = 0) V CSENS 10 ppm/V Voltage Control Sensitivity (VCR = 1) V CSENS 5 ppm/V 2.
- Supply Voltage df o ±0.2 ppm 3) Frequency vs.
- Load Change df o ±0.2 ppm 4) Output Voltage (10k Ω // 10 pF) Vout 0.6 1.0 Vpp Harmonic Distortion -25 dBc Compensation Range ± 2.5 ppm T C -40 85 oC Compensation Range ± 2.0 ppm T C -30 85 oC Compensation Range ± 1.5 ppm T C -25 75 oC Comp.
- Seating Plane Co-planarity max 0.08 mm Lead Finish Solder plate 7.62 - 25.4 µ m, material Sn 85% Pb 15% EMBOSSED TAPE SPECIFICATIONS Dimension Min/Max Unit Ao 5.00 ±0.10 mm Bo 3.20 ±0.10 mm D1 1.50 min mm E 1.75 mm F 5.50 ±0.05 mm Ko 1.45.
Topics covered by the datasheet
The document includes sections related to:
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
- ORDERING INFORMATION
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MAS9280B1TG00 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mas9280b1tg00-micro-analog-systems