LS33600 overview
LS33600 is a component documented by saftbatteries. The PDF description identifies it as "3.6 V Primary lithium-thionyl chloride High energy." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: saftbatteries
- Part number: LS33600
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The capacity restored by the cell varies according to current drain, temperature and cut-off) Open circuit voltage (at + 20°C) 3.67 V Nominal voltage (at 0.7 mA + 20°C) 3.6 V Nominal energy 61.2 Wh Pulse capability: Typically up to 400 mA.
- Consult Saft) Maximum recommended continuous current 250 mA (to maintain cell heating within safe limits.
- Consult Saft) Storage (recommended) + 30°C (+ 86°F) max (for more severe conditions, consult Saft) Operating temperature range - 60°C/+ 85°C (Operation above ambient T may lead to reduced capacity and (- 76°F/+ 185°F) lower voltage reading.
- Consult Saft) Physical characteristics Diameter (max) 33.4 mm (1.32 in) Height (max) 60.2 or 61.6 mm (2.37 in or 2.42 in) depending on finish type Typical weight 90 g (3.2 oz) Li metal content approx.
- Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water.
- Current (mA) Time (hours) Current (mA) Restored Capacity versus Current and Temperature (2.0 V cu t-off) Typical discharge profiles at + 20°C Voltage plateau versus Current and Temperature (at mi d-discharge) Saft Specialty Battery Group 1.
Topics covered by the datasheet
The document includes sections related to:
- Electrical characteristics
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the LS33600 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ls33600-saftbatteries