I605-2AC5H-20.000 overview
I605-2AC5H-20.000 is a component documented by ILSI America LLC. The PDF description identifies it as "5 mm x 7 mm Ceramic Package SMD VCXO, TTL / HC-MOS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ILSI America LLC
- Part number: I605-2AC5H-20.000
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 5.08 4.2 2.0 Bypass =0.01 uF 7.0 0.3 5.0 0.2 Dimension Units: mm Recommended Pad Layout 5.08 2.0 Max.
- Product Features: Applications: Small Surface Mount Package SD/HD Video Based Output for many frequencies Wireless Base Stations CMOS/TTL Compatible Logic Levels Sonet /SDH Compatible with Leadfree Processing VoIP T1/E1, T3/E3 Frequency 1.
- Duty Cycle 50% ±5% Rise / Fall Time 10.0 nS Max.
- Output Load 15pF, Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 TTL Frequency Stability 50 ppm Max.
- Supply Voltage See Input Voltage Table, tolerance ±5 % Pull Range See Pullability Table Current 50 mA Max** Linearity 10% Max.
- Temperature Operating Storage See Operating Temperature Table in Part Number Guide -55 C to +125 C Phase Jitter <3 pS RMS NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 6) and GND (pin 3) to minimize power supply noise..
- Part Number Guide Sample Part Number: I605-1BC3H-20.000 Package Operating Temperature Stability (in ppm) Pullability Supply Voltage Enable / Disable Frequency I605 - 1 = 0 C to +70 C *D = 15 B = 50 PPM Min.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the I605-2AC5H-20.000 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=i605-2ac5h-20-000-ilsi-america-llc