GC100 overview
GC100 is a component documented by Elma Electronic Ltd. The PDF description identifies it as "Wi-Fi & WWAN • PCIe® Optical Cabling." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Elma Electronic Ltd
- Part number: GC100
- Category: IC
- Datasheet length: 19 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1100MHz < Carmel CPU, ARMv8.2, 3x dual-core CPU clusters (six NVIDIA Carmel processor cores), max.
- USB, Gigabit Ethernet, SD Card slot < 10W/15W/20W operating modes © E K F - 3 - e k f .
- GC102 mezzanine card (dual M.2 Wi-Fi 6, M.2 WWAN 4G/5G) < Custom specific mezzanine board design on request < Custom specific base board design on request Power Requirements < DC Input, wide range 9V-57V < Power consumption tbd W max. < Fa.
- 95% RH non condensing < Altitude -300m ... +3000m < Shock 15g 0.33ms, 6g 6ms < Vibration 1g 5-2000Hz < EC Regulatory EN55024, EN55032, EN62368-1 (CE) < MTBF tbd years all items may be subject to technical changes w/o further notice © E K F.
- c o m Embedded Gold • GC100/GC102 • Edge AI • NVIDIA® Jetson Xavier™ NX HSE bottom mount DP1 DP2 © EKF ekf.com Eurostyle 3.5mm 4-Pos.
- c o m Embedded Gold • GC100/GC102 • Edge AI • NVIDIA® Jetson Xavier™ NX HSE top mount landing zone SMA pigtail antenna cables GbE USB 3.0 SIM PPS PPM Embedded Gold® GC102 © EKF ekf.com 133.0mm 134.5mm © E K F - 1 3 - e k f .
- c o m Embedded Gold • GC100/GC102 • Edge AI • NVIDIA® Jetson Xavier™ NX DP DP USB3 DC Embedded Gold® GbE 140.0mm 65.0mm USB2 SDR GbE USB3 SIM1/2 SSD PE PG GC100/GC102 Recommended Front Panel Design © E K F - 1 5 - e k f .
Topics covered by the datasheet
The document includes sections related to:
- Applications
- Ordering Information
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the GC100 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=gc100-elma-electronic-ltd