FX009LG overview
FX009LG is a component documented by CML Microcircuits. The PDF description identifies it as "Digitally Controlled Amplifier Array." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: CML Microcircuits
- Part number: FX009LG
- Category: Amplifier
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Tolerances: C = + 20% Fig.2 External Component Connections Application Recommendations To avoid excess noise and instability in the final installation it is recommended that the following points be noted. (a) A noisy or badly regulated pow.
- SINAD (4B) 50, Input Frequency = 1.0kHz input Level OdB ref: = 775mVrms Ch1 to Ch8 Gain Set to OdB 40.
- Supply voltage -0.3 to 7.0V Input voltage at any pin (ref V.. = OV) -0.3 to (Vp, + 0.3V) Sink/source current (supply pins) +/-30MA (other pins) +/- 20MA Total device dissipation @ Ty, 25°C 800mW Max.
- Derating 10mwirc Operating temperature range: FXO0SJ -30°C to +85°C (cerdip) FXOO9LG/LS -30°C to +70°C (plastic) Storage temperature range: FXO09J -55°C to +125°C (cerdip) FXOOSLG/LS -40°C to +85°C (plastic) Operating Limits All device cha.
- Unit Static Values Supply Voltage (V,,) 45 5.0 5.5 Vv Supply Current — - All Stages Quiescent - 0.13 - mA — All Stages Operating - 2.6 - mA Dynamic Values Control Functions Input Logic '1' 3.5 - - Vv Input Logic '0" - - 15 v Digital Input.
- Gain Set 0dB, Input Level 1kHz -3.0dB (549mVrms).
- a.c short-circuit input, measured in a 30kHz bandwidth.
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FX009LG datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fx009lg-cml-microcircuits