FPF1005 overview

FPF1005 is a component documented by ON Semiconductor. The PDF description identifies it as "Advanced Load Management Products October-2017, Rev. 7." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: ON Semiconductor
  • Part number: FPF1005
  • Category: IC
  • Datasheet length: 9 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • The input voltage range operates from 1.2V to 5.5V.
  • In FPF1006, 120 Ω on-chip load resistor is added for output quick discharge when switch is turned off.
  • Typical Application Circuit Part Switch Input Buffer Output Discharge ON Pin Activity FPF1005 55m Ω, PMOS Schmitt NA Active HI FPF1006 55m Ω, PMOS Schmitt 120Ω Active HI OFF ON ON VIN GND FPF1005/6 VOUT TO LOAD CIN COUT BOTTOM PIN 1 TOP ww.
  • copper board Parameter Min Max Unit VIN, VOUT, ON to GND -0.3 6 V Maximum Continuous Switch Current 1.5 A Power Dissipation @ TA = 25°C (Note 1) 1.2 W Operating Temperature Range -40 85 °C Storage Temperature -65 150 °C Thermal Resistance.
  • The core of each device is a 55mΩ P-Channel MOSFET and a controller capable of functioning over a wide input operating range of 1.2-5.5V.
  • The FPF1006 contains a 120 Ω on-chip load resistor for quick output discharge when the switch is turned off.
  • A 1µF ceramic capacitor, C IN, placed close to the pins is usually sufficient.

Topics covered by the datasheet

The document includes sections related to:

  • DATASHEET SEARCH SITE
  • Features
  • Applications
  • Ordering Information
  • Electrical Characteristics
  • Application Information

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the FPF1005 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=fpf1005-on-semiconductor

FPF1005 ON Semiconductor IC FPF1005 datasheet FPF1005 specifications FPF1005 applications