FL1F overview
FL1F is a component documented by IDEC Corporation. The PDF description identifies it as "SmartRelay." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: IDEC Corporation
- Part number: FL1F
- Category: IC
- Datasheet length: 10 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Maximum I/O 60 points: (24DI + 20DO + 8AI + 8AO) Maximum programming capacity: 8,500 bytes (400 function blocks) Operating temperature: -20 to +50oC (*1) (*2) For Base Modules with LCD display, not only program editing and monitoring of fu.
- With a built-in clock function, a maximum of 20-day backup is possible (at ambient temperature of 25°C.) Also, NTP function adjusts the clock automatically when connected to the internet.
- Remarks 24V AC/DC 12V DC 220g FL1F-RD1 Supplied with a mounting clip and gasket Options Name Part No.
- rated input: 28.8V DC) — — Analog Input Error ±1.5% (of full scale) ±1.5% (of full scale) — — Analog Input Resolution 10 bits (0 to 1000) 10 bits (0 to 1000) — — Cycle time 300 ms 300 ms 300 ms 300 ms Allowable Voltage Range 0 to 28.8V DC.
- 1A External fuse required: 16A maximum External fuse required: 16A maximum External fuse required: 16A maximum Minimum Switching Load — 10 mA, 12V DC (reference value) 10 mA, 12V DC (reference value) 10 mA, 12V DC (reference value) Initial.
- rated input: 40 mA) — Digital Resolution — — — — 10 bits (0 to 1000) — Input Error — — — — ±1.5% (of full scale) — Input Impedance — — — — 76 kΩ (0 to 10V) 250Ω (0 to 20mA) — Sampling Cycle — — — — 50ms — Output Wire Length 100m maximum 10.
- 1A External fuse required: 16A maximum External fuse required: 16A maximum External fuse required: 16A maximum — Yes Minimum Switching Load — 10 mA, 12V DC (reference value) 10 mA, 12V DC (reference value) 10 mA, 12V DC (reference value) —.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FL1F datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fl1f-idec-corporation