FA2924-AL overview
FA2924-AL is a component documented by Silicon Laboratories. The PDF description identifies it as "ISOLATED EVALUATION BOARD FOR THE Si3402B." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Silicon Laboratories
- Part number: FA2924-AL
- Category: Power Management
- Datasheet length: 14 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Boards are generally shipped configured to produce +5 V output voltage but can be configured for +3.3 V or other output voltages as shown in Table 2 on page 9.
- The feedback loop compensation has been optimized for 3.3, 5, 9, and 12 V output as well as with standard and low ESR capacitors in the output filter section (Table 2 on page 9).
- The use of low ESR capacitors is recommended for lower output ripple, improved load transient response and low temperature (below 0 °C) operation.
- on backside 1 to 1.2mm pitch 0.3 to 0.33mm diameter.
- Place optional bypass diodes for high power applications (>7W) in parallel.
- Si3402B Schematic—5 V, Class 3 PD Figure 2.
- Si3402BISO-EVB Bill of Materials** 1 DFLT30A-7 D2 4.65 A 30 V Zener POWERDI-123 DFLT30A-7 Diodes Inc.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FA2924-AL datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fa2924-al-silicon-laboratories