ESP32-S3-MINI-1U-N8 overview
ESP32-S3-MINI-1U-N8 is a component documented by ESPRESSIF SYSTEMS (SHAN. The PDF description identifies it as "Small-sized module supporting 2.4 GHz Wi-Fi (802.11b/g/n) and Bluetooth® 5 Version 1.3." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ESPRESSIF SYSTEMS (SHAN...
- Part number: ESP32-S3-MINI-1U-N8
- Category: Microcontroller
- Datasheet length: 52 Pages
Key features noted in the PDF
- ESP32-S3 embedded, Xtensa® dual-core 32-bit LX7 microprocessor (with single precision FPU), up to 240 MHz
- 384 KB ROM
- 512 KB SRAM
- 16 KB SRAM in RTC
- Up to 8 MB Quad SPI flash
- 2 MB PSRAM (ESP32-S3FH4R2 only) Wi-Fi
- 802.11b/g/n
Applications listed in the PDF
- Smart Home
- Industrial Automation
- Health Care
- Consumer Electronics
- Smart Agriculture
- POS Machines Espressif Systems 3 Submit Documentation Feedback ESP32-S3-MINI-1 & MINI-1U Datasheet v1.3
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- CAN Specification 2.0), ADC, touch sensor, temperature sensor, timers and watchdogs Integrated Components on Module 40 MHz crystal oscillator Antenna Options ESP32-S3-MINI-1: On-board PCB antenna ESP32-S3-MINI-1U: External antenna via a co.
- If you have a requirement for a higher flash clock frequency of 120 MHz or if you need the flash auto suspend feature, pleasecontactus.
- At the core of the modules is an ESP32-S3, an Xtensa® 32-bit LX7 CPU that operates at up to 240 MHz.
- Table 6: VDD_SPI Voltage Control VDD_SPI power source2 Voltage EFUSE_VDD_SPI_FORCE GPIO45 EFUSE_VDD_SPI_ TIEH VDD3P3_RTC via RSPI 3.3 V 0 0 IgnoredFlash Voltage Regulator 1.8 V 1 Flash Voltage Regulator 1.8 V 1 Ignored 0 VDD3P3_RTC via RSP.
- BCK clock frequency, from 10 kHz up to 40 MHz, is supported.
- These interfaces operate at 40 MHz or lower, and support conversion among RGB565, YUV422, YUV420, and YUV411.
- The camera module is designed to receive parallel video data signals, and its bus supports an 8-bit~ 16-bit DVP image sensor, with clock frequency of up to 40 MHz.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Revision History
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ESP32-S3-MINI-1U-N8 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=esp32-s3-mini-1u-n8-espressif-systems-shan