EP3003 overview
EP3003 is a component documented by Eorex Corporation. The PDF description identifies it as "2-CH, 600mA Synchronous Step-down Converter." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Eorex Corporation
- Part number: EP3003
- Category: IC
- Datasheet length: 13 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 2008).. - Update currently version “not supported burst mode＂ information. - Modify Typical Performance Characteristics without burst mode (page 5) Rev.03 EP3003 2-CH, 600mA Synchronous Step-down Converter The EP3003 is a dual channel, 1.5.
- The EP3003 can supply 600mA of load current from a 2.5V to 5.5V input voltage.
- Each output voltage is adjustable from 0.6V to 5V.
- Internal synchronous 0.35Ω, 1A power switches provide high efficiency without the need for external Schottky diodes.
- Basic Application Circuit for 2.5V and 1.8V Output Voltages** Rev.03 EP3003 Package/Order Information MSOP: D FN: Absolute Maximum Rating (Note1) Storage Temperature Range (MSOP) -65°C to +150°C Storage Temperature Range (DFN) .. -65°C to.
- Rev.03 EP3003 Electrical Characteristics (Note 2) : (VIN =VRUN= 3.6V, TA = 25°C, unless otherwise noted.) Parameter Conditions MIN TYP MAX unit Input Voltage Range 2.5 5.5 V Input DC Supply Current Active Mode Shutdown Mode VFB=0.5V RUN=0V.
- No minal voltage for this pin is 0.6V.
Topics covered by the datasheet
The document includes sections related to:
- Revision History
- DESCRIPTION
- APPLICATIONS
- FEATURES
- Ordering Information
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EP3003 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ep3003-eorex-corporation