EG2113D overview
EG2113D is a component documented by Jingjing Microelectroni. The PDF description identifies it as "High-power MOS transistor, IGBT transistor gate driver chip REV 1.0 May 18, 2019." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Jingjing Microelectroni...
- Part number: EG2113D
- Category: Logic IC
- Datasheet length: 14 Pages
Key features noted in the PDF
- Application design
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Features ◼ High-end suspension bootstrap power supply design, withstand voltage up to 600V ◼ Integrated internal bootstrap diode,fewer peripheral devices ◼ Maximum frequency support 500KHZ ◼ Low-side VDD voltage range 3.3 V-5V ◼ Low-side V.
- EG2113D high-end operating voltage up to 600V, low-end VCC supply voltage range is wide 10V ~ 20V, static power consumption is less than 50uA.The chip has a latching function to prevent the output power tube is turned on at the same time,t.
- Application Areas ◼ Sine wave inverter ◼ Variable frequency pump controller ◼ Square wave inverter ◼ Electric vehicle controller ◼ Brushless motor driver ◼ High voltage Class-D power amplifier Yijing Microelectronics Co., Ltd EG2113D Datas.
- Pin description Pin serial № Pin name I/O Description 3 VCC Power Chip power input, voltage range 10V-20V,an external high frequency 0.1 uF bypass capacitor 11 VDD Power Logic circuit power supply terminal, voltage range 3.3 V-5V,an extern.
- Units High side floating absolute voltage VB - -0.3 600 V High side floating supply offset voltage VS - VB-20 VB+0.3 V High side floating supply offset voltage HO - VS-0.3 VB+0.3 V Low side output voltage LO - -0.3 VCC+0.3 V Low side and l.
- Units Power supply Quiescent current Input logic signal high potential Input logic signal low potential Current at the high level of the input logic signal Input logic signal low current Input dangling，VСС=15V All input control signals All.
- The main functions of the EG2113D are logic signal input processing,dead time control, level translation function, floating bootstrap power structure and upper and Lower Bridge totem pole output.Logic signal input high threshold of 2.5 V o.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EG2113D datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=eg2113d-jingjing-microelectroni