E52140A62CXX2 overview
E52140A62CXX2 is a component documented by ELMOS Semiconductor AG. The PDF description identifies it as "Transceiver compliant with PSI5 standard v1.3 and v2.1." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ELMOS Semiconductor AG
- Part number: E52140A62CXX2
- Category: Logic IC
- Datasheet length: 84 Pages
Key features noted in the PDF
- Transceiver compliant with PSI5 standard v1.3 and v2.1
- Provides two independent master channels (up to 6 sensors each)
- Supporting 125 Kbit/s and 189 Kbit/s protocols
- Supporting synchronous and asynchronous opera- tion modes
- Various diagnostic features
- Internal sync-voltage generation
- Programmable PSI5 channel voltage 4.6V to 11V
Applications listed in the PDF
- Safety (airbag) control systems
- Powertrain control systems
- Vehicle dynamics control system General Description The E521.40 was developed to manage the connection and communication between a micro controller unit and up to 12 sensor satell.
- tooth gap method
- pulse width method The device is a PSI5 V1.3 and V2.1 compliant trans- ceiver which provides two independently operating channels. The channels are able to communicate in low powe.
- IRFZ24NS,
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Operating temperature range -40° C to +125° C Safety (airbag) control systems Powertrain control systems Vehicle dynamics control system General Description The E521.40 was developed to manage the connection and communication between a mic.
- battery ) CG EMC filter (TBD) NCS SCLK SDO _TXD SDI _RXD CP 1 CP 2 CSYNC CSY NC CCP Optional: VC S YN C GNDA GNDD TRIG VDD NRES CDD GNDP VDD Power supply & Reset µC SPI CEMC R EMC NMOS K CSYNC E521.40A CEMC REMC Figure 2.1.1-1: Application.
- battery ) NCS SCLK SDO _TXD SDI _RXD CP 1 CP 2 CSYNC CSY NC CCP Optional: VC S YN C GNDA GNDD TRIG VDD NRES CDD GNDP VDD Power supply & Reset µC SPI CSYNC E521.40A Figure 2.1.1-2: Application Circuit with VBUS Supplied from ECU Table 2.1.1.
- The following external NMOS transistor are recommended: IRFZ24NS, BUK7635-55A, HUFA76409D3ST, SQD15N06-42L.
- Exposure to absolute maximum rated conditions for extended peri- ods may affect device reliability.
- Description Condition Symbol Min Max Unit Ωfor pins SIFx; VSUPPLY; (100pF/1.5k ) ESD pins SIFX,VSUPPL Y ±4000 V Ωfor all other pins; (100pF/1,5k ) ESD all other pins ±2000 V ±750 V ±450 V SUPPPLY -0.3 40 V 6 V BUS voltage range VBUS -0.3 4.
- Elmos Semiconductor AG Data Sheet QM-No.: 25DS0110E.04 2 Channel Multi-Mode PSI5 Transceiver E 521.40 Production Data – Apr 27, 2016 Parameters are guaranteed within the range of recommended operating conditions unless otherwise specified.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
- Ordering Information
- Description
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the E52140A62CXX2 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=e52140a62cxx2-elmos-semiconductor-ag