E24N overview
E24N is a component documented by Estek Electronics Co. L. The PDF description identifies it as "HEXFET Power MOSFET." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Estek Electronics Co. L...
- Part number: E24N
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The low thermal resistance and low package cost of the TO-220 contribute to its wide acceptance throughout the industry.
- l Advanced Process Technology l Dynamic dv/dt Rating l 175°C Operating Temperature l Fast Switching l Fully Avalanche Rated V DSS = 55V R DS(on) = 0.07Ω I D = 17A S D G T O -22 AB Parameter Min.
- Units R θJC R θCS Case-to-Sink, Flat, Greased Surface –––– 0.50 –––– °C/W R θJA Thermal Resistance Parameter Max.
- Units I D @ T C = 25°C Continuous Drain Current, V GS @ 10V 17 I D @ T C = 100°C Continuous Drain Current, V GS @ 10V 12 A I DM Pulsed Drain Current 68 P D C = 25°C Power Dissipation 45 W Linear Derating Factor 0.30 W/°C V GS Gate-to-Sou.
- Units Conditions V (BR)DSS Drain-to-Source Breakdown Voltage 55 ––– ––– V V GS = 0V, I D = 250µA ΔV (BR)DSS /ΔT J Breakdown Voltage Temp.
- Coefficient –––0.052 ––– V/°C Reference to 25°C, I D = 1mA R DS(on) Static Drain-to-Source On-Resistance ––– ––– 0.07 Ω V GS = 10V, I D = 10A V GS(th) Gate Threshold Voltage 2.0 ––– 4.0 V V DS = V GS , I D = 250µA g fs Forward Transcondu.
- 10 Between lead, 6mm (0.25in.) from package and center of die contact C iss Input Capacitance ––– 370 ––– V GS = 0V C oss Output Capacitance ––– 140 ––– pF V DS = 25V C rss Reverse Transfer Capacitance ––– 65 ––– ƒ = 1.0MHz, See Fig.
Topics covered by the datasheet
The document includes sections related to:
- Description
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the E24N datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=e24n-estek-electronics-co-l