CH5101A overview
CH5101A is a component documented by List of Unclassifed Man. The PDF description identifies it as "CMOS Monochrome Digital Video Camera." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: CH5101A
- Category: IC
- Datasheet length: 32 Pages
Key features noted in the PDF
- 352 x 288 monochrome active pixel array, 1/3 inch lens format ¥
- Programmable formats CIF 352x288, QCIF 176x144, CCIR601 704x288
- Digital output CCIR601 4:2:2 (8-bit)
- Multidimensional automatic shutter control
- Below 1 LUX sensitivity
- Programmable I 2 C Serial bus control : - Frame rate: 30fps-1fps in eight steps - Gamma correction - Shutter speed - Analog gain - 16 backlight compensation zones - Black clamp le.
- Stand-alone 25fps PAL and 30fps NTSC operation with all automatic features
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- These pins supply the 5V power to the digital section of CH5101.
- Supplies the 5V power to the analog section of the CH5101.
- The control range is from ~1uS, to just under the frame duration.
- However, in direct connections to the bus master device, the CH5101 can operate at transfer rates up to 5 MHz.
- A pullup resistor (R P ) must be connected to a 5V ± 10% supply.
- Maximum and minimum values of pullup resistor (R P ) The value of R P depends on the following parameters: Supply voltage Bus capacitance Number of devices connected (input current + leakage current = I input ) The supply voltage limits th.
- The equation for RP is shown below: R P >= 10 3 /C (where: R P is in k Ω and C, the total capacitance, is in pF) The maximum HIGH level input current of each input/output connection has a specified maximum value of 10 µA.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Description
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CH5101A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ch5101a-list-of-unclassifed-man