CAV25512 overview
CAV25512 is a component documented by ON Semiconductor. The PDF description identifies it as "512-Kb SPI Serial CMOS EEPROM September, 2016 ??Rev. 4." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: CAV25512
- Category: Memory
- Datasheet length: 14 Pages
Key features noted in the PDF
- Automotive Temperature Grade 1 (−40°C to +125°C)
- 10 MHz SPI Compatible
- 2.5 V to 5.5 V Supply V oltage Range
- SPI Modes (0,0) & (1,1)
- 128−byte Page Write Buffer
- Additional Identification Page with Permanent Write Protection
- Self−timed Write Cycle
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- SOIC−8 V SUFFIX CASE 751BD SCK SOIC (V), TSSOP (Y) TSSOP−8 Y SUFFIX CASE 948AL Chip SelectCS Serial Data OutputSO Write ProtectWP GroundVSS Serial Data InputSI Serial ClockSCK FunctionPin Name PIN FUNCTION Hold Transmission InputHOLD Power.
- The DC input voltage on any pin should not be lower than −0.5 V or higher than VCC + 0.5 V.
- During transitions, the voltage on any pin may undershoot to no less than −1.5 V or overshoot to no more than VCC + 1.5 V, for periods of less than 20 ns. **Table 2.
- PIN CAPACITANCE (TA = 25°C, f = 1.0 MHz, VCC = +5.0 V) (Note 2)** This parameter is tested initially and after a design or process change that affects the parameter.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
- ORDERING INFORMATION
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CAV25512 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cav25512-on-semiconductor