CA15-9-ADP overview
CA15-9-ADP is a component documented by Multi-Tech Systems, Inc. The PDF description identifies it as "DE15M-DE9F Serial Cable, Data Only (6 ft) December 29, 2014." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Multi-Tech Systems, Inc...
- Part number: CA15-9-ADP
- Category: IC
- Datasheet length: 35 Pages
Key features noted in the PDF
- GPIO cable and GPIO connectors simplify testing needs
- Four analog potentiometers simulate sensor inputs
- Eight physical switches simulate digital signal inputs
- Jumpers enable additional power and ground options
- Package also includes power supply, US, UK and EU power plugs and GPIO cable For use with the following models: MTCDP-xx (All varieties) MT100EOCG-xx (All varieties) Order PN Desc.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- This power supply is rated for a maximum of 0.5 amps (500 mA) output at 9 VDC.
- To determine the frequency bands that your product uses, please consult Table 1 at the end of this document.
- Cellular Products Accessories Ordering Guid e Frequency Bands: 850/900/1800/1900 MHz For use with the following products (All varieties): MultiConnect® rCell MultiConnect® Cell MultiConnect® OCG-D MultiConnect® AW MTR-C2 MTC-C2-xx-N2 ((N16.
- Order PN Description Picture ANGPS-1MM GPS Antenna, Mag Mount, 5 Meter Cable (1 Pk) ANGPS-10MM GPS Antenna, Mag Mount, 5 Meter Cable (10 Pk) See above ANGPS-50MM GPS Antenna, Mag Mount, 5 Meter Cable (50 Pk) See above Combined cellular and.
- For use with the following products (All varieties): SocketWireless® Bluetooth® SocketWireless® Wi-Fi® MTS2BTSMI MT810SWM-IP Order PN Description Picture ANBT-1HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 4" (2 dBi)(1 Pk) ANBT-10HRA 2.4 GHz Wi-Fi/.
- For use with the following products (All varieties): SocketWireless® Bluetooth® MTS2BTSMI Order PN Description Picture CARSMA-MMCX-1F Reverse SMA-to-MMCX Coax RF Cable, 6" (1 Pk) See Above CARSMA-MMCX-10 Reverse SMA-to-MMCX Coax RF Cable.
- For use with the following products (All varieties): SocketWireless® Wi-Fi® MultiConnect® PCIe SocketWireless® Bluetooth® MT810SWM-IP MTPCIE-H5 MTS2BTSMI MTPCIE-H5-V-BW Order PN Description Picture CARSMA-UFL-1F Reverse SMA-to-UFL Coax RF.
Topics covered by the datasheet
The document includes sections related to:
- Revision History
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CA15-9-ADP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ca15-9-adp-multi-tech-systems-inc