CA15-9-D MULTITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 35
Technical content
Release 1.5 December 29, 2014 www.multitech.com
Cellular Products Accessories Ordering Guid e
Revision History
Release Date Change details 1.5 12/292014 Updated MTC-C2 antenna options Added MTR-EV3, MTC-EV3 and MTCDP-EV3 models Removed serial cable CA15-9-DV (discontinued) 1.4 4/23/2014 Added replacement power blades for power supplies 1.3 3/4/2014 Added MTPCIE, MTR-H5, MTC-H5 and MTCMR-EV3 products Updated several antenna options 1.2 9/16/2013 Added new USB cable for MultiConnect® Cell 100 series products (MTC-xx) Added MTR-C2, MTC-C2 and MTCMR-C2 products (New products) 1.1 8/22/2013 Added DIN Rail Mounting Accessory Kits 1.0 7/10/2013 Initial release
Cellular Products Accessories Ordering Guid e Table of Contents MultiModem® Cell, iCell, rCell and MultiConnect® OCG Right Angle ... 33 Table 1 Table 2
Cellular Products Accessories Ordering Guid e Introduction The purpose of this document is to provide the reader guidance when ordering accessories for MultiTech® cellular products. This document will not provide any guidance on the selection of the cellular product to order. Please contact your sales representative for guidance in selecting the appropriate cellular p roduct for your application. When ordering cellular products, you will have the option to order an un-bundled cellular product (no power supply, antennas, interface cables etc…) or a bundled version that includes the cellular product, power supply, antennas and interface cables in the packaging. If you order a bundled product, you likely will not need to order any of the accessories contained in this ordering guide unless you need a replacement item. If you order an un-bundled version of the product, utilize this ordering guide to assist you in selecting the various accessories you will need to operate the device. Throughout this document, you will see a reference to certain models of products. For example, an “H5” or “MTR” model. If your device has an “H5” or “MTR” as part of its ordering part number, then the comment is applicable to your device. Printed and downloaded versions of this document are uncontrolled. This document is updated periodically and new revisions are subsequently posted to MultiTech’s website. The URL for the current revision of this document is listed below: http://www.multitech.com/cpag.go Note: The descriptions used in this document are descriptive in nature and might not match the descriptions located on the price list, web site or order documentation. Please reference those documents for the appropriate description.
Cellular Products Accessories Ordering Guid e Power Supplies for Cellular Products MultiTech cellular products operate on DC voltages. You can elect to power the cellular product with the following options: An AC adaptor that provides DC power to the cellular product Your own source of DC voltage For the majority of products, the DC connection is made with a screw -on locking barrel connector.
Cellular Products Accessories Ordering Guid e Options for powering cellular devices with an AC adaptor For use with all models of cellular devices and the MTOCG-BOB-DK with the exception of MTCBA-H3-EN3 models. Note: MultiModem® Cell products with a –U designation (e.g. MTCBA-H5-U) and MultiConnect® Cell USB versions (e.g. MTC-H5-B03-KIT) operate on USB bus power and do not require a separate power supply. Note: The description below contains the ISO country code for the type of AC power plug that is included with the power supply. For example, CN includes a Chinese power plug. These power supplies are rated for a maximum of 1.7 amps output. Order PN Description Picture PS-9VCB-LBC-U-NAM 100-240VAC/9VDC US Power Supply w/Locking Barrel PS-9VCB-LBC-U-EU 100-240VAC/9VDC EU Power Supply w/Locking Barrel PS-9VCB-LBC-U-GB/IE 100-240VAC/9VDC UK Power Supply w/Locking Barrel PS-9VCB-LBC-U-AU/NZ 100-240VAC/9VDC AU Power Supply w/Locking Barrel PS-9VCB-LBC-U-CN 100-240VAC/9VDC CN Power Supply w/Locking Barrel
Cellular Products Accessories Ordering Guid e Replacement Power Blades for AC adaptors For use with power supply models starting with ordering part number PS-9VCB-LBC-U-xx listed above or the PS-9VCB-SBC-U-xx listed below. Order PN Description Picture PB-NAM US style locking power blade PB-EU European style locking power blade PB-GB UK style locking power blade PB-AU Australian style locking power blade PB-CN Chinese style locking power blade
Cellular Products Accessories Ordering Guid e Options for powering cellular devices with an IEC-320 style AC adaptor For use with all models of cellular devices and the MTOCG-BOB-DK with the exception of MTCBA-H3-EN3 models. Note: MultiModem® Cell products with a –U designation (e.g. MTCBA-H5-U) and MultiConnect® Cell USB versions (e.g. MTC-H5-B03-KIT) operate on USB bus power and do not require a separate power supply. Note: This option requires you to order the power supply and a separate IEC -320 power cord with the proper power plug for the region of operation. In installations that utilize an IEC-320 Uninterruptable Power Supply (UPS), the power cord might not be required. These power supplies are rated for a maximum of 1.0 amp output. Step 1: Order the power supply Order PN Description Picture PS-9V1A-LBC-U 100-240VAC/9VDC IEC-320 Power Supply w/o Cord w/Locking Barrel Step 2: Order the appropriate IEC-320 power cord for your region of operation Order PN Description Picture PC-IEC320-NAM IEC-320 Power Cord w/US plug PC-IEC320-EURO IEC-320 Power Cord w/EU plug PC-IEC320-GB IEC-320 Power Cord w/UK plug PC-IEC320-AU IEC-320 Power Cord w/Australian plug PC-IEC320-CN IEC-320 Power Cord w/Chinese plug PC-IEC320-IN IEC-320 Power Cord w/Indian plug PC-IEC320-JP IEC-320 Power Cord w/Japanese plug
Cellular Products Accessories Ordering Guid e Option for powering the following cellular devices with an AC adaptor with US power plug For use with the following discontinued products (All varieties): MultiModem® Cell MTCBA-C MTCBA-E MTCBA-G-F4 Note: The products referenced above only require 4.5 watts or less of power to operate. This model of power supply is only available with a US style power plug. This power supply will not work with any other cellular products other than the models listed above. This power supply is rated for a maximum of 0.5 amps (500 mA) output at 9 VDC. Order PN Description Picture PS-9V500MA-LBC 110-120VAC/9VDC US Power Supply (4.5 watt) w/Locking Barrel
Cellular Products Accessories Ordering Guid e Options for powering all versions of MTCBA-H3-EN3 cellular devices Note: This model operates on 5 volts DC. These power supplies are rated for a maximum of 2.6 amps output. (MTCBA-H3-EN3 products are discontinued) MTCBA-H3-EN3 Order PN Description Picture PS-5VCB-LBC-U-NAM 100-240VAC/5VDC US Power Supply w/Locking Barrel PS-5VCB-LBC-U-EU 100-240VAC/5VDC EU Power Supply w/Locking Barrel PS-5VCB-LBC-U-GB/IE 100-240VAC/5VDC UK Power Supply w/Locking Barrel
Cellular Products Accessories Ordering Guid e Options for powering the cellular device with your own source of DC voltage Order PN Description Picture FPC-532-DC DC Power Cable (w/Inline Fuse) (5 ft) PC-932-DC DC Power Cable (w/o Fuse) (5 ft) Notes: MultiConnect rCell 100 series (MTR-xx models) and MultiConnect Cell (MTC-xx models) products that utilize the FPC-532-DC power cable for general use must be connected to a UL listed LPS or Class 2 power supply. These products are UL 201 certified for in-vehicular use and must use the FPC-532-DC power cable for these installations. Safety certification (Example: UL60950-1) of any device has not been evaluated with the PC-932-DC DC power cable or the power source it is connected to. The DC power cable and power source do not apply or extend to the device’s safety certification unless noted otherwise in the device d ocumentation. It is recommended that the optional DC power cable, power source and device be evaluated by an accredited safety agency such as UL or equivalent.
Cellular Products Accessories Ordering Guid e Options for powering cellular development kits For use with the following products: Universal Socket Developer Kit MultiConnect® OCG-E Developer Kit MTSMI-UDK MT100EOCG-DK Note: The description below contains the ISO country code for the type of AC power plug that is included with the power supply. For example, CN includes a Chinese power plug. These power supplies are rated for a maximum of 1.7 amps output. Order PN Description Picture PS-9VCB-SBC-U-NAM 100-240VAC/9VDC US Power Supply w/Push-on Barrel PS-9VCB-SBC-U-EU 100-240VAC/9VDC EU Power Supply w/Push-on Barrel PS-9VCB-SBC-U-GB/IE 100-240VAC/9VDC UK Power Supply w/Push-on Barrel PS-9VCB-SBC-U-AU/NZ 100-240VAC/9VDC AU Power Supply w/Push-on Barrel PS-9VCB-SBC-U-CN 100-240VAC/9VDC CN Power Supply w/Push-on Barrel
Cellular Products Accessories Ordering Guid e Antennas for Cellular Products You must order the correct antenna that supports the frequency bands that your cellular product operates in. Note that certain models of MultiTech products support a feature called diversity. If you want to take advantage of the diversity feature, you will require two cellular antennas per device. To determine the frequency bands that your product uses, please consult Table 1 at the end of this document. If you would like to order an antenna that combines the cellular and GPS antennas into a single magnetic mount antenna, skip to the section on combined cellular and GPS antennas.
Cellular Products Accessories Ordering Guid e Frequency Bands: 850/900/1800/1900 MHz For use with the following products (All varieties): MultiConnect® rCell MultiConnect® Cell MultiConnect® OCG-D MultiConnect® AW MTR-C2 MTC-C2-xx-N2 ((N16N1 MTCDP-E1 MT100A2W-G MTR-EV3 MTC-C2-xx-N16 MTCDP-EV2 MT200A2W-C1 MTC-EV3 MTCDP-EV3 MT200A2W-G MTCDP-G2 MTCDP-H4 MultiModem® rCell MultiModem® iCell MultiModem® Cell MultiModem® iSMS MTCBA-C1-EN2 MTCMR-C1 MTCBA-C1 SF100-G MTCBA-G2-EN2 MTCMR-E1 MTCBA-C1X SF400-G MTCBA-H4-EN2 MTCMR-EV2 MTCBA-E1 SF800-G MTCBA-E1-EN2 MTCMR-G2 MTCBA-G2 MTCBA-EV2-EN2 MTCMR-G-F4 MTCBA-G-F4 MTCBA-H3-EN3 MTCMR-H4 MTCBA-H3 MTCMR-C2 MTCMR-EV3 SocketModem® Cell SocketModem® iCell Quick Carrier™ USB-E MultiConnect® OCG-E MTSMC-C1 MTSMC-C1-IP/GP MT100UCC-C2 MT100EOCG-EV2 MTSMC-C2 MTSMC-C2-IP/GP MT100UCC-EV2 MT100EOCG-EV3 MTSMC-E1 MTSMC-EV2-IP/GP MT100UCC-EV3 MT100EOCG-G2 MTSMC-EV3 MTSMC-EV3-IP/GP MT100UCC-G2 MT100EOCG-H4 MTSMC-G2 MTSMC-G2-IP/GP MT100UCC-H3 MTSMC-G-F4 MTSMC-G-F4-IP MT100UCC-H4 MTSMC-H3-U MTSMC-H3-IP MTSMC-H4-IP/GP MultiConnect® PCIE MTPCIE-EV3 MTPCIE-C2 Order PN Description Picture ANQB-1HRA 850/900/1800/1900 MHz Antenna, 7" (2 dBi)(1 Pk) ANQB-10HRA 850/900/1800/1900 MHz Antenna, 7" (2 dBi)(10 Pk) See above ANQB-50HRA 850/900/1800/1900 MHz Antenna, 7" (2 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e Frequency Bands: 850/900/1700/1800/1900/2100 MHz For use with the following products (All varieties): MultiModem® rCell MultiModem® iCell MultiModem® Cell MTCBA-C1-EN2 MTCMR-C1 MTCBA -C1 MTCBA -E1-EN2 MTCMR -E1 MTCBA -C1X MTCBA -EV2-EN2 MTCMR -EV2 MTCBA -E1 MTCBA -G2-EN2 MTCMR -G2 MTCBA -G2 MTCBA -H4-EN2-P1 MTCMR -H4-P1 MTCBA -H4-EN2-P2 MTCMR -H4-P2 Order PN Description Picture ANPB-1HRA 850/900/1700/1800/1900/2100 MHz Antenna, 3" (2 dBi)(1 Pk) ANPB-10HRA 850/900/1700/1800/1900/2100 MHz Antenna, 3" (2 dBi)(10 Pk) See above ANPB-50HRA 850/900/1700/1800/1900/2100 MHz Antenna, 3" (2 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e Frequency Bands: 850/900/1700/1800/1900/2100 MHz For use with the following products (All varieties): MultiConnect® rCell MultiConnect® Cell MTR-G3 MTC-G3 MTR-H6 MTC-C2-xx-N3 Order PN Description Picture ANPB2-1HRA 850/900/1800/1900/2100 MHz Antenna, 4" (5 dBi)(1 Pk) ANPB2-10HRA 850/900/1800/1900/2100 MHz Antenna, 4" (5 dBi)(1 Pk) See above ANPB2-50HRA 850/900/1800/1900/2100 MHz Antenna, 4" (5 dBi)(1 Pk) See above
Cellular Products Accessories Ordering Guid e Frequency Bands: 850/900/1700/1800/1900/2100 MHz For use with the following products (All varieties): MultiModem® rCell MultiModem® iCell MultiModem® Cell MTCBA-H5-EN2 MTCMR-H5 MTCBA-H5 MultiConnect® rCell MultiConnect® Cell MTR-H5 MTC-H5 MultiConnect® OCG-D MultiConnect® AW MTCDP-H5 MT200A2W-H5 SocketModem® Cell SocketModem® iCell MultiConnect® OCG-E MTSMC-H5 MTSMC-H5-IP MT100EOCG-H5 MultiConnect® PCIe Quick Carrier™ USB-E MTPCIE-H5 MT100UCC-H5 MTPCIE-H5-V-BW Order PN Description Picture ANHB-1HRA 850/900/1700/1800/1900/2100 MHz Antenna, 7" (3 dBi)(1 Pk) ANHB-10HRA 850/900/1700/1800/1900/2100 MHz Antenna, 7" (3 dBi)(10 Pk) See above ANHB-50HRA 850/900/1700/1800/1900/2100 MHz Antenna, 7" (3 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e Frequency Bands: 900/1800 MHz (Typically used in Europe) For use with the following products (All varieties): MultiModem® Cell SocketModem® Cell SocketModem® iCell MMCModem™ MTCBA-G-F1 MTSMC-G-F1 MTSMC-G-F1-IP MTMMC-G-F1 Order PN Description Picture ANF1-1HRA 900/1800 MHz Antenna, 4" (0 dBi) (1 Pk) ANF1-10HRA 900/1800 MHz Antenna, 4" (0 dBi) (10 Pk) See above ANF1-50HRA 900/1800 MHz Antenna, 4" (0 dBi) (50 Pk) See above ANF1-1MMQW 900/1800 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(1 Pk) ANF1-10MMQW 900/1800 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(10 Pk) See above ANF1-50MMQW 900/1800 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(50 Pk) See above ANF1-1MMHW 900/1800 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(1 Pk) ANF1-10MMHW 900/1800 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(10 Pk) See above ANF1-50MMHW 900/1800 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(50 Pk) See above Frequency Bands: 850/1900 MHz (Typically used in North America) For use with the following products (All varieties): MultiModem® Cell SocketModem® Cell SocketModem® iCell MMCModem™ MTCBA-C MTSMC-C MTSMC-C-IP MTMMC-C MTCBA-G-F2 MTSMC-G-F2 MTSMC-G-F2-IP MTMMC-G-F2
Cellular Products Accessories Ordering Guid e Order PN Description Picture ANCF2-1HRA 850/1900 MHz Antenna, 4" (0 dBi) (1 Pk) ANCF2-10HRA 850/1900 MHz Antenna, 4" (0 dBi) (10 Pk) See above ANCF2-50HRA 850/1900 MHz Antenna, 4" (0 dBi) (50 Pk) See above ANCF2-1MMQW 850/1900 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(1 Pk) ANCF2-10MMQW 850/1900 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(10 Pk) See above ANCF2-50MMQW 850/1900 MHz 1/4 Wave Antenna, Mag Mount, 4" (3 dBi)(50 Pk) See above ANCF2-1MMHW 850/1900 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(1 Pk) ANCF2-10MMHW 850/1900 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(10 Pk) See above ANCF2-50MMHW 850/1900 MHz 1/2 Wave Antenna, Mag Mount, 12" (3 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e GPS antennas for cellular products Note: If you would like to order an antenna that combines the cellular and GPS antennas into a single magnetic mount antenna, skip to the section on combined cellular and GPS antennas. Order PN Description Picture ANGPS-1MM GPS Antenna, Mag Mount, 5 Meter Cable (1 Pk) ANGPS-10MM GPS Antenna, Mag Mount, 5 Meter Cable (10 Pk) See above ANGPS-50MM GPS Antenna, Mag Mount, 5 Meter Cable (50 Pk) See above Combined cellular and GPS antennas Frequency Bands: 850/900/1700/1800/1900/2100 MHz (cellular) For use with all products Order PN Description Picture ANGSM-GPS-1MM GSM/GPS Antenna,Mag Mount, 5 Meter Cable (1 dBi)(1 Pk) ANGSM-GPS-10MM GSM/GPS Antenna,Mag Mount, 5 Meter Cable (1 dBi)(10 Pk) See above ANGSM-GPS-50MM GSM/GPS Antenna,Mag Mount, 5 Meter Cable (1 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e Wi-Fi/Bluetooth Antennas Note: MultiTech Wi-Fi and Bluetooth products support operation of these technologies in the 2.4 GHz band. For use with the following products (All varieties): SocketWireless® Bluetooth® SocketWireless® Wi-Fi® MTS2BTSMI MT810SWM-IP Order PN Description Picture ANBT-1HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 4" (2 dBi)(1 Pk) ANBT-10HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 4" (2 dBi)(10 Pk) See above ANBT-50HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 4" (2 dBi)(50 Pk) See above For use with the following products (All varieties): MultiConnect® rCell
100 Series MultiConnect® OCG-D MultiConnect® PCIe
MTR-xx MTOCGD3-xx MTPCIE-H5-V-BW MTPCIE-BW Order PN Description Picture ANWF-1HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 3" (1.8 dBi)(1 Pk) ANWF-10HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 3" (1.8 dBi)(10 Pk) See above ANWF-50HRA 2.4 GHz Wi-Fi/Bluetooth Antenna, 3" (1.8 dBi)(50 Pk) See above
Cellular Products Accessories Ordering Guid e Serial Cables Order PN Description Picture CA9-9-D DE9M-DE9F Serial Cable (6 ft) CA15-9-D DE15M-DE9F Serial Cable, Data Only (6 ft) CA15-9-ADP DE15M-DE9F Adapter CA-CDP-DEBUG 3-pin Serial Debug Cable (MTCDP, MTOCG and Developer Boards)
Cellular Products Accessories Ordering Guid e USB Cables Order PN Description Picture CA-USB USB Cable Type A to Type B (4 ft) CA-USB-A-MINI-B USB Cable Type A to Type B Mini (4 ft) CA-USB-A-MINI-B-3 USB Cable Type A to Type B Mini (24 AWG, 3 ft) (Compatible with MultiConnect Cell (MTC-xx) ) USB Data Cables for the QuickCarrier™ USB-E Note: For use with all varieties of QuickCarrier™ USB-E (MT100UCC) products. Order PN Description Picture MT100UCC-AK MT100UCC Kit 2 USB Cables, Antenna & 8.5" SMA-UFL Coax Cable N/A CA-UCC-USB-5P-4P MT100UCC USB Cable, Mother Board 5 Pin-MT100UCC 4 Pin (10") See Below CA-UCC-USB-TP A-4P MT100UCC USB Cable, USB Type A-MT100UCC 4 Pin (10") See Below
Cellular Products Accessories Ordering Guid e Ethernet Cables Order PN Description Picture CA-RJ-45 Ethernet Cable (RJ-45, 6 ft) GPIO Cables Order PN Description Picture CA-CMR-GPIO 6-Pin GPIO Cable for MTCMR iCell Intelligent Modems (5 ft) CA-CDP-GPIO 36-Pin GPIO Cable for MTCDP Series Programmable Gateway(12")
Cellular Products Accessories Ordering Guid e MultiConnect® OCG Break out Board The MultiConnect OCG Break-out Board is designed to be used with MultiTech’s MTCDP and MT100EOCG series of Programmable Gateways. It provides a quick and easy way to simulate your application environment, exercise common analog and digital inputs, and quickly complete general purpose connections using the GPIO cable and quick-connects.
Features
- GPIO cable and GPIO connectors simplify testing needs
- Four analog potentiometers simulate sensor inputs
- Eight physical switches simulate digital signal inputs
- Jumpers enable additional power and ground options
- Package also includes power supply, US, UK and EU power plugs and GPIO cable For use with the following models: MTCDP-xx (All varieties) MT100EOCG-xx (All varieties) Order PN Description Picture MTOCG-BOB-DK Programmable Gateway Break-Out Board (use with MTCDP and EOCG) See below RF Cables for embedded cellular products
Cellular Products Accessories Ordering Guid e MultiTech embedded cellular products contain surface mount RF connectors on the PCB that are used to interface with an RF cable and antenna. The RF cables listed below include an appropriate connector t hat interfaces with the surface mount connector on one end and a bulk head panel mount SMA connector on the other. For the cellular connection, a standard SMA connector is specified. For Wi -Fi and/or Bluetooth connections, a reverse polarity SMA (RSMA) connector is specified. SMA-to-MMCX Antenna Cables Note: Used for the cellular connection with embedded models that utilize an MMCX connector on the PCB. For use with the following products (All varieties): SocketModem® EDGE MTSMC-E MTSMC-E1 Order PN Description Picture CASMA-MMCX-1 SMA-to-MMCX Coax RF Cable, 6" (1 Pk) See Above CASMA-MMCX-10 SMA-to-MMCX Coax RF Cable, 6", (10 Pk) See Above CASMA-MMCX-50 SMA-to-MMCX Coax RF Cable, 6", (50 Pk) See Above
Cellular Products Accessories Ordering Guid e Reverse SMA-to-MMCX Antenna Cables Note: Used for the Wi-Fi/Bluetooth connection with embedded models that utilize an MMCX connector on the PCB. For use with the following products (All varieties): SocketWireless® Bluetooth® MTS2BTSMI Order PN Description Picture CARSMA-MMCX-1F Reverse SMA-to-MMCX Coax RF Cable, 6" (1 Pk) See Above CARSMA-MMCX-10 Reverse SMA-to-MMCX Coax RF Cable, 6" (10 Pk) See Above CARSMA-MMCX-50 Reverse SMA-to-MMCX Coax RF Cable, 6" (50 Pk) See Above
Cellular Products Accessories Ordering Guid e SMA-to-UFL Antenna Cables Note: Used for the cellular connection with embedded models that utilize an UFL connector on the PCB. For use with the following products (All varieties): SocketModem® Cell SocketModem® iCell QuickCarrier™ USB-E MultiConnect® OCG-E MultiConnect® PCIe MTSMC-C1 MTSMC-C1-IP/GP MT100UCC-C2 MT100EOCG-EV2 MTPCIE-H5 MTSMC-C2 MTSMC-C2-IP/GP MT100UCC-EV2 MT100EOCG-EV3 MTPCIE-H5-V-BW MTSMC-EV3 MTSMC-EV2-IP/GP MT100UCC-EV3 MT100EOCG-G2 MTPCIE-EV3 MTSMC-G2 MTSMC-EV3-IP/GP MT100UCC-G2 MT100EOCG-H4 MTPCIE-C2 MTSMC-H3-U MTSMC-G2-IP/GP MT100UCC-H3 MT100EOCG-H5 MTSMC-H4 MTSMC-H3-IP MT100UCC-H4 MTSMC-H5 MTSMC-H4-IP/GP MT100UCC-H5 MTSMC-H5-IP/GP Order PN Description Picture CASMA-UFL-1 SMA-to-UFL Coax RF Cable, 8" (1 Pk) See Above CASMA-UFL-10 SMA-to-UFL Coax RF Cable, 8" (10 Pk) See Above CASMA-UFL-50 SMA-to-UFL Coax RF Cable, 8" (50 Pk) See Above
Cellular Products Accessories Ordering Guid e Reverse SMA-to-UFL Antenna Cables Note: Used for the Wi-Fi/Bluetooth connection with embedded models that utilize an UFL connector on the PCB. For use with the following products (All varieties): SocketWireless® Wi-Fi® MultiConnect® PCIe SocketWireless® Bluetooth® MT810SWM-IP MTPCIE-H5 MTS2BTSMI MTPCIE-H5-V-BW Order PN Description Picture CARSMA-UFL-1F Reverse SMA-to-UFL Coax RF Cable, 6" (1 Pk) See Above CARSMA-UFL-10 Reverse SMA-to-UFL Coax RF Cable, 6" (10 Pk) See Above CARSMA-UFL-50 Reverse SMA-to-UFL Coax RF Cable, 6" (50 Pk) See Above
Cellular Products Accessories Ordering Guid e Mounting bracket for MultiConnect® rCell 100 Series cellular routers Note: All Models supported (MTR-xx) Order PN Description Picture WMB-MTR MultiConnect rCell 100 Series Mounting Bracket (MTR-xx)
Cellular Products Accessories Ordering Guid e Mounting bracket for MultiModem® GPRS and CDMA and MultiConnect® Cell 100 Series Cellular Modems For use with the following products (All varieties): MultiModem® GPRS MultiModem® CDMA MultiConnect® Cell MTCBA-C1X MTC-xx MTCBA-G-F1 MTCBA-G-F2 MTCBA-G-F4 Order PN Description Picture WMB-CBA MultiModem GPRS & CDMA Mounting Bracket (MTCBA-G-FX & C1X)
Cellular Products Accessories Ordering Guid e Note: An additional hole has been added to the mounting flange to support DIN rail mounting. MTCBA-xx products will begin shipping with the additional hold at the beginning of 2Q 2014 . DIN Rail Mounting Kits for MultiModem® Cell, iCell and rCell MultiConnect® OCG-D Programmable Gateways For use with the following products (All varieties): MultiModem® rCell MultiModem® iCell MultiModem® Cell MultiConnect® OCG-D MTCBA-xx-EN2 MTCMR-xx MTCBA-xx MTCDP-xx Option 1: Standard Flange Mounting Notes: 1) Package contents include DIN Rail clips and associated hardware for mounting devices in the orientation shown above. 2) Clips onto 35mm and 32mm DIN rails Order PN Description Picture DIN-FLANGE-10PACK DIN Rail Mounting Kit, Flange Mount (10 Pk)
Cellular Products Accessories Ordering Guid e Note: An additional hole has been added to the mounting flange to support DIN rail mounting. MTCBA-xx products will begin shipping with the additional hold at the beginning of 2Q 2014. Right Angle DIN Rail Mounting Kits for MultiModem® Cell, iCell and rCell MultiConnect® OCG-D Programmable Gateways For use with the following products (All varieties): MultiModem® rCell MultiModem® iCell MultiModem® Cell MultiConnect® OCG-D MTCBA-xx-EN2 MTCMR-xx MTCBA-xx MTCDP-xx Option 2: Right Angle Flange Mounting Notes: 1) Package contents include DIN Rail clips and associated hardware for mounting devices in the orientation shown above. 2) Clips onto 35mm and 32mm DIN rails Order PN Description Picture DIN-FLANGE-RA-10PACK DIN Rail Mounting Kit, Flange Mount, Right Angle (10 Pk)
Cellular Products Accessories Ordering Guid e Note: DIN rail support is available now on all MultiConnect® rCell 100 and Cell 100 series products. DIN Rail Mounting Kits for MultiConnect® rCell 100 Series Cellular Routers MultiConnect® Cell 100 Series Cellular Modems Note: All Models supported (MTR-xx and MTC-xx) Notes: 1) Package contents include DIN Rail clips and associated hardware for mounting devices in the orientation shown above. 2) Clips onto 35mm and 32mm DIN rails. Order PN Description Picture DIN-MTR-MTC-10PACK DIN Rail Mounting Kit (MTR & MTC) (10 Pk)
Cellular Products Accessories Ordering Guid e Table 1 MultiTech GSM Product Frequency Bands GSM HSPA EDGE GPRS H6 H5 H4 H3 E1 E G3 G2 G-F1 G-F2 G-F4 850 900 2100 850 900 1700 1900 2100 850 1900 2100 850 900 1900 2100 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 850 900 1800 1900 900 1800 850 1900 850 900 1800 1900 Table 2 MultiTech CDMA Product Frequency Bands CDMA EVDO 1xRTT EV3 EV2 EV1 C2 C1 C 800 1900 800 1900 800 1900 800 1900 800 1900 800 1900 800 1900 800 1900 800 1900