BYV26E overview
BYV26E is a component documented by NXP Semiconductors. The PDF description identifies it as "Fast soft-recovery controlled avalanche rectifiers 1996 May 30." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: NXP Semiconductors
- Part number: BYV26E
- Category: IC
- Datasheet length: 12 Pages
Key features noted in the PDF
- Glass passivated
- High maximum operating temperature
- Low leakage current
- Excellent stability
- Guaranteed avalanche energy absorption capability
- Available in ammo-pack.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 2/3 page (Datasheet) MAM047 ka /#03/#03/#03 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134).
- IFRM repetitive peak forward current Tamb =6 0°C; see Figs 8 and 9 BYV26A to E − 6.0 A BYV26F and G − 6.4 A IFSM non-repetitive peak forward current t = 10 ms half sine wave; Tj=T j max prior to surge; VR =V RRMmax − 30 A ERSM non-repetiti.
- UNIT VF forward voltage I F = 1 A; Tj=T j max; see Figs 14 and 15BYV26A to E −− 1.3 V BYV26F and G −− 1.3 V VF forward voltage I F =1A ; see Figs 14 and 15BYV26A to E −− 2.50 V BYV26F and G −− 2.15 V V(BR)R reverse avalanche breakdown volt.
- Device mounted on an epoxy-glass printed-circuit board, 1.5 mm thick; thickness of Cu-layer≥40 µm, see Fig.19.
- handbook, halfpage 0 200 MLB533 IF(AV) (A) lead length 10 mm handbook, halfpage 0 200 MSA856 0.5 IF(AV) (A) amb BYV26A to E a = 1.42; VR =V RRMmax ;δ = 0.5.
- VRRMmax during 1−δ ; curves include derating for Tj max at VRRM = 1000 V.
- VRRMmax during 1−δ ; curves include derating for Tj max at VRRM = 1400 V.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
- Application information
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BYV26E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=byv26e-nxp-semiconductors