BT331 overview
BT331 is a component documented by BeRex Corporation. The PDF description identifies it as "700-2700 MHz 1.5~2.0W Power Amplifier." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: BeRex Corporation
- Part number: BT331
- Category: Amplifier
- Datasheet length: 20 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- This device is designed for use where high linearity is required and features high OIP3 and Power with low consumption current (400mA) and requires a few external matching components such as a DC block- ing capacitors on the In/Output pin.
- Product Description Device Features 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
- All other trademarks are the property of their respective owners. © 2010 BeRex Parameter Frequency Unit 1900 2140 2450 2600 MHz 900 IS-95C ACPR - - - - dBm 23.3 WCDMA ACLR 23.3 23.4 21.5 21.5 dBm - Min.
- Unit Bandwidth 700 2700 MHz IC @ (Vc = 5V) 360 410 440 mA VC 5.0 V RTH 10.0 ° C/W Parameter Unit Rating Operating Case Temperature °C -40 to +85 Storage Temperature °C -55 to +155 Junction Temperature °C +220 Operating Voltage V +5.5 Suppl.
- FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob. *ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob.
- C 700-2700 1.5~2.0W Power Amplifier BT331 S-Parameter (Vdevice = 5.0V, Icc = 400mA, T = 25 ° C, calibrated to device leads) Freq S11 S11 S21 S21 S12 S12 S22 S22 [MHz] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] Preliminary Datasheet Be.
- Distance between the center of the shunt Inductor(L2) and the input pin of BT331 _ 6.45 mm.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BT331 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=bt331-berex-corporation