5916 overview
5916 is a component documented by Anderson Power Products. The PDF description identifies it as "Powerpole® Connectors PP75 - Up to 120 Amps REV C7." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Anderson Power Products...
- Part number: 5916
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Mating T ype Thread Force Part Numbers Minimum Quantity 1,000 Busbar 10-24 High B01915P1 75BBS Lock Nut 10-24 H1216P8 10G54 55A Right Angle Standard Powerclaw PCB Contacts Standard Powerclaw contacts are for use inside a PP75 housing and p.
- Loose Piece Minimum Quantity 1,000 100 T in Plated PC5934T -BK PC5934T Silver Plated PC5934S-BK PC5934S 55A Vertical Mini Powerclaw PCB Contacts Vertical Mini Powerclaw contacts save space by not requiring a PP75 housing on the PCB side.
- Current - Temperature Derating per IEC 60512-5-2 Test 5B PP75 CONNECTOR TEMPERATURE CHARTS - Temperature rise charts are based on a 25°C ambient temperature.
- mm 0.437 11.100 Operating Temperature ² °F °C Standard & Ground -4° to 221° -20° to 105° Chemical Resistant* -40 to 221° -40° to 105° *Chemical resistant material not available for PCB guide housings Mating Cycles No Load by Plating Silver.
- Powerclaw Adjacent Poles 0.079 2.0 Mechanical Shock MIL-STD-202 213 Condition A 50g’s Vibration High Frequency MIL-STD-202 204 Condition A 10g’sNOTE 1: See IEC 60664-1 for working voltage.
- 1 - Based on: 105°C rated or better cable of the largest size.
- Properly calibrated APP® recommended tooling, and a 25°C ambient temperature.
Topics covered by the datasheet
The document includes sections related to:
- Description
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 5916 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=5916-anderson-power-products