25AA010AT-I/MC overview
25AA010AT-I/MC is a component documented by Microchip Technology. The PDF description identifies it as "1K SPI Bus Serial EEPROM 2006." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Microchip Technology
- Part number: 25AA010AT-I/MC
- Category: Memory
- Datasheet length: 28 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Preliminary DS21832C-page 1 25AA010A/25LC010A Device Selection Table Features: 10 MHz max.
- clock frequency Low-power CMOS technology: - Max.
- Write Current: 5 mA at 5.5V, 10 MHz - Read Current: 5 mA at 5.5V, 10 MHz - Standby Current: 5 μA at 5.5V 128 x 8-bit organization Write Page mode (up to 16 bytes) Sequential Read Self-timed Erase and Write cycles (5 ms max.) Block Write pr.
- Ranges Packages 25AA010A 1.8-5.5V I P, MS, SN, ST, MC, OT 25LC010A 2.5-5.5V I, E P, MS, SN, ST, MC, OT - Industrial (I): -40°C to +85°C - Automotive (E): -40°C to +125°C Name Function CS Chip Select Input SO Serial Data Output WP Write-Pro.
- DC CHARACTERISTICS Industrial (I): TA = -40°C to +85°C VCC = 1.8V to 5.5V Automotive (E): TA = -40°C to +125°C VCC = 2.5V to 5.5V Param.
- Units Test Conditions D001 VIH1 High-level Input Voltage V D002 VIL1 Low-level Input Voltage -0.3 V VCC ≥ 2.7V (Note) D003 VIL2 -0.3 V VCC < 2.7V (Note) D004 VOL Low-level Output Voltage 0.4 V IOL = 2.1 mA D005 VOL 0.2 V IOL = 1.0 mA, VCC.
- Preliminary DS21832C-page 3 25AA010A/25LC010A TABLE 1-2: AC CHARACTERISTICS AC CHARACTERISTICS Industrial (I): TA = -40°C to +85°C VCC = 1.8V to 5.5V Automotive (E): TA = -40°C to +125°C VCC = 2.5V to 5.5V Param.
Topics covered by the datasheet
The document includes sections related to:
- ELECTRICAL CHARACTERISTICS
- Description
- REVISION HISTORY
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 25AA010AT-I/MC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=25aa010at-i-mc-microchip-technology