ZXMN10A08G ZETEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Low on-resistance  Fast switching speed  Low threshold  SOT223 package

Applications

 DC-DC converters  Power management functions  Disconnect switches  Motor control

Ordering information

V(BR)DSS RDS(on) (/H9024) ID (A) 100 0.250 @ VGS= 10V 2.9 0.300 @ VGS= 6V 2.6 Device Reel size (inches) Tape width (mm) Quantity per reel ZXMN10A08GTA 7 12 1,000 D S G D Pinout - top view S D G

Issue 1 - June 2006 2 www.zetex.com © Zetex Semiconductors plc 2006 Absolute maximum ratings NOTES: (a) For a device surface mounted on 25mm x 25mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. (b) For a device surface mounted on FR4 PCB measured at t /H1134910 sec. (c) Repetitive rating - 25mm x 25mm FR4 PCB, D=0.02,pulse width 300 /H9262s - pulse width limited by maximum junction temperature. Parameter Symbol Limit Unit Drain-source voltage V DSS 100 V Gate-source voltage V GS ±20 V Continuous drain current @ V GS= 10V; Tamb = 25°C(b) ID 2.9 A @ VGS= 10V; Tamb = 70°C(b) 2.3 A @ VGS= 10V; Tamb = 25°C(a) 2.0 A Pulsed drain current(c) IDM 11 A Continuous source current (body diode)(b) IS 5A Pulsed source current (body diode)(c) ISM 11 A Power dissipation at Tamb =25°C(a) PD 2W Linear derating factor 16 mW/°C Power dissipation at Tamb =25°C(b) PD 3.9 W Linear derating factor 31 mW/°C Operating and storage temperature range T j, Tstg -55 to +150 °C Thermal resistance Parameter Symbol Limit Unit Junction to ambient(a) R/H9052JA 62.5 °C/W Junction to ambient(b) R/H9052JA 32 °C/W

Issue 1 - June 2006 3 www.zetex.com © Zetex Semiconductors plc 2006 Thermal characteristics

Issue 1 - June 2006 4 www.zetex.com © Zetex Semiconductors plc 2006 Electrical characteristics (at Tamb = 25°C unless otherwise stated) Parameter Symbol Min. Typ. Max. Unit Conditions Static Drain-source breakdown voltage V(BR)DSS 100 V I D= 250/H9262A, VGS=0V Zero gate voltage drain current I DSS 0.5 /H9262AV DS= 100V, VGS=0V Gate-body leakage I GSS 100 nA V GS=±20V, VDS=0V Gate-source threshold voltage V GS(th) 2.0 V I D= 250/H9262A, VDS=VGS Static drain-source on-state resistance (*) NOTES: (*) Measured under pulsed conditions. Pulse width /H11349300/H9262s; duty cycle /H113492%. RDS(on) 0.25 /H9024VGS= 10V, ID= 3.2A 0.30 /H9024VGS= 6V, ID = 2.6A Forward transconductance(*) (‡) gfs 5S V DS= 15V, ID= 3.2A Dynamic(‡) Input capacitance C iss 405 pF V DS= 50V, VGS=0V f=1MHzOutput capacitance C oss 28.2 pF Reverse transfer capacitance C rss 14.2 pF Switching (†) (‡) (†) Switching characteristics are independent of operating junction temperature. (‡) For design aid only, not subject to production testing. Turn-on-delay time t d(on) 3.4 ns V DD= 30V, ID= 1.2A RG≅6.0/H9024, VGS= 10VRise time t r 2.2 ns Turn-off delay time t d(off) 8n s Fall time t f 3.2 ns Gate charge Q g 4.2 nC V DS= 50V, VGS= 5V ID= 1.2A Total gate charge Q g 7.7 nC V DS= 50V, VGS= 10V ID= 1.2AGate-source charge Q gs 1.8 nC Gate drain charge Q gd 2.1 nC Source-drain diode Diode forward voltage(*) VSD 0.87 0.95 V T j=25°C, IS= 3.2A, VGS=0V Reverse recovery time(‡) trr 27 ns T j=25°C, IS= 1.2A, di/dt=100A//H9262sReverse recovery charge(‡) Qrr 32 nC

Issue 1 - June 2006 5 www.zetex.com © Zetex Semiconductors plc 2006 Typical characteristics

Issue 1 - June 2006 6 www.zetex.com © Zetex Semiconductors plc 2006 Typical characteristics Current regulator Charge Gate charge test circuit Switching time test circuit Basic gate charge waveform Switching time waveforms D.U.T 50k12V Same as D.U.T VGS VGS VDS VG QGS QGD QG VGS 90% 10% t(on)t(on) td(on) tr trtd(off) VDS VCC RD RG VDS ID IG

Issue 1 - June 2006 7 www.zetex.com © Zetex Semiconductors plc 2006 Intentionally left blank

Issue 1 - June 2006 8 www.zetex.com © Zetex Semiconductors plc 2006 For international sales offices visit www.zetex.com/offices Zetex products are distributed worldwide. For details, see www.zetex.com/salesnetwork This publication is issued to provide outline information only whic h (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned. The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. Europe Zetex GmbH Streitfeldstraße 19 D-81673 München Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Americas Zetex Inc

700 Veterans Memorial Highway

Hauppauge, NY 11788 USA Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Asia Pacific Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Corporate Headquarters Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches DIM Millimeters Inches DIM Millimeters Inches Min Max Min Max Min Max Min Max A - 1.80 - 0.071 e 2.30 BSC 0.0905 BSC