DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

D+H EURO RWA D+H EURO SHEV BSY+ 0 100 C l

24 V DC

» Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101‑2; and for daily ventilation » With integrated BSY+ motor and synchronised electronics controlled via microprocessor » High‑speed function (HS) for especially fast opening windows in case of fire (SHEV) » Option of up to 8 drives in one synchronous group » Option of cable infeed above and below » Drive unit can be changed from left to right » Programmable drive functions and different drive parameters » Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection) » Time‑controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection) Potential drive options ZA Series Rack and pinion drives You can find the explanations for the icons on the last page Find out about permission details from your D+H Partner We reserve the right to make changes. ©2017 D+H Mechatronic AG, Ammersbek

A Ø 104 Brackets are not included and have to be ordered separately. Supply 24 V DC / ±15 % / 2 A Duty cycle 30 % Force of pressure 800 N Tensile force 800 N Nominal locking force 1100 N Service life 20000 double strokes * OPEN running speed 7.1 mm/s OPEN running speed ‑ HS 17 mm/s CLOSED running speed 7.1 mm/s Type of protection IP 65 Emission sound pressure level LpA ≤ 70 dB(A) Temperature range ‑5 °C ... +75 °C Fire resistance B300 (30 min / 300 °C) Housing Aluminium / Polycarbonate Surface Powder‑coated Colour White aluminium (~ RAL 9006) Connection 2.5 m silicone cable Type Art. No. Stroke Dimension A Weight Remark ZA 85/600‑BSY+ HS Set 27.001.07 600 mm 762 mm 2.10 kg ZA 85/800‑BSY+ HS Set 27.001.12 800 mm 962 mm 2.40 kg Without holes on bottom, only for topside mounting ZA 85/1000‑BSY+ HS Set 27.001.17 1000 mm 1162 mm 2.70 kg Without holes on bottom, only for topside mounting ZA‑BSY+ 27.000.01 Variable equipment possible 500 600 700 800 900 1000 1100 1200 300 600 900 1200 1500 1800 Permanent Stroke/uni00A0//uni00A0mm Max. pressure load/uni00A0//uni00A0N Dimensions All specifications in mm Specification per drive Specification per drive Design * For vertical use, please consult with D+H Sales ! Pressure load diagram Weight per drive Technical data Status 01/2017

C BSY+ 0 100 C l ACB (Advanced Communication Bus) Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com‑ munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB‑capable control panel or enables it to be directly connected to higher‑level controllers such as a building management system. Audible signal (corresponding to protection class) AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc‑ tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining stroke of 28 mm. End position message (OPEN / CLOSED) Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in. BRV signal Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41 and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not isolated. BSY+ (synchronisation of drives) In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD‑BSY+). HS “High‑Speed” In the case of SHEV, the high‑speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs quietly and quickly, as usual. Mechanical adjustment Drive option for adjusting the overall length or design (e.g.: centred chain outlet). Function programming Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP , BSY or BSY+ electronics. SGI signal (position reporting) In combination with the D+H servo plug‑in unit SE 622, the drives can be controlled with perfect positioning. SKS (closing edge protection) Drive option, which enables an anti‑trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ). TM tandem connecting shaft Available as an option for rack and pinion drives. The drives are mechanically coupled with the rack and pinion slave units (ZM) with connecting shafts (VW). W (use outdoors) Available as an option for rack and pinion drives to make them suitable for outdoor use. The drive is equipped with a pressure release vent (depen‑ ding on installation), condensation protective coating on the electronics and a gearbox with hardened stainless steel pinion. WS (use in swimming pool) Available as an option for rack and pinion drives to make them suitable for use in swimming pools. The drive is equipped with an A4 rack and pinion, A4 eyebolt and a gearbox with hardened stainless steel pinion.