FRA11-BSY

FRA11-BSY DH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

24 V DC

» With motor electronics controlled via microprocessor for communication and sequence control of connected BSY+ and PLP window drives for opening windows » To be used in conjunction with an internal chamber gearbox and 43 mm mounting distance » Can be combined with any D+H drive with BSY+ technology » BRV (for PLP) or VP (for BSY+) option required for connected window drive » Up to 4 FRA 11‑BSY+ drives on one window possible » Position display for the locking mechanism » LED status display for the drive » Automatic locking mechanism for the window » Increased burglary protection Potential drive options FRA Series Window locking drives You can find the explanations for the icons on the last page We reserve the right to make changes. ©2018 D+H Mechatronic AG, Ammersbek

D+H EURO RWA D+H EURO SHEV Supply 24 V DC / ±15 % / 1 A Duty cycle 30 % Torque 10 Nm Rotation angle 90° / 180° Service life > 10000 cycles Type of protection IP 40 Emission sound pressure level LpA ≤ 70 dB(A) Temperature range ‑5 °C ... +75 °C Housing Polyamide Surface Painted Colour Silver (~ RAL 9006) Connection 2.5 m silicone cable W x H x D 43 x 200 x 43 mm Weight 0.75 kg Type Art. No. Remark FRA 11‑BSY+ 24.000.11 FRA‑BSY+ 24.000.10 Variable equipment possible Dimensions All specifications in mm Design Technical data Approvals / Certificates Find out about permission details from your D+H Partner 43 43 200 Status 01/2018

C BSY+ 0 100 C l ACB (Advanced Communication Bus) Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com‑ munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB‑capable control panel or enables it to be directly connected to higher‑level controllers such as a building management system. Audible signal (corresponding to protection class) AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc‑ tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining stroke of 28 mm. End position message (OPEN / CLOSED) Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in. BRV signal Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41 and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not isolated. BSY+ (synchronisation of drives) In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD‑BSY+). HS “High‑Speed” In the case of SHEV, the high‑speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs quietly and quickly, as usual. Mechanical adjustment Drive option for adjusting the overall length or design (e.g.: centred chain outlet). Function programming Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP , BSY or BSY+ electronics. SBD side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SBU side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SGI signal (position reporting) In combination with the D+H servo plug‑in unit SE 622, the drives can be controlled with perfect positioning. SKS (closing edge protection) Drive option, which enables an anti‑trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ). TM tandem connecting shaft Available as an option for rack and pinion drives. The drives are mechanically coupled with the rack and pinion slave units (ZM) with connecting shafts (VW). W (use outdoors) Available as an option for rack and pinion drives to make them suitable for outdoor use. The drive is equipped with a pressure release vent (depen‑ ding on installation), condensation protective coating on the electronics and a gearbox with hardened stainless steel pinion. WS (use in swimming pool) Available as an option for rack and pinion drives to make them suitable for use in swimming pools. The drive is equipped with an A4 rack and pinion, A4 eyebolt and a gearbox with hardened stainless steel pinion.