XPLBWT-00-0000-0000V40CB

XP-L2 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE .Com/XL Amp CLD-DS149 Rev 0A Cree® XLamp® XP-L2 LEDs ProDuCt DEsCriPtion The XLamp ® XP-L2 LeD is Cree’s highest performing high-density discrete LeD. Leveraging key elements of Cree’s SC5 Technology™ Platform, the high-power XP-L2 LeD improves the lumen density, voltage characteristics and reliability of the XP-L LeD in the same 3.45 mm x 3.45 mm package. This best-in-class performance enables lighting manufacturers to deliver differentiated solutions at lower system costs for applications such as roadway, outdoor area, spot and high-bay lighting.

FEAturEs

• Available in white, 70-CRI white, 80-CRI white and 90-CRI white
• ANSI-compatible chromaticity bins
• Binned at 85 °C
• Maximum drive current: 3000 mA
• Low thermal resistance: 2.2 °C/W
• Wide viewing angle: 125°
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J-STD-020C
• electrically neutral thermal path
• UL ® recognized component (e349212) tAbLE oF ContEnts Flux Characteristics - EasyWhite® Order Flux Characteristics - ANSI Order Codes Relative Flux vs. Junction Temperature ..10 Relative Chromaticity vs. Temperature ...12 Performance Groups - Luminous Flux ....14 Cree’s EasyWhite ® Kits Plotted on ANSI Cree’s ANSI Kits Plotted on ANSI

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED ChArACtEristiCs Characteristics unit Minimum typical Maximum Thermal resistance, junction to solder point °C/W 2.2 Viewing angle (FWHM) degrees 125 Temperature coefficient of voltage mV/°C -1.3 ESD withstand voltage (HBM per Mil-Std-883D) v 8000 DC forward current mA 3000 Reverse voltage v 5 Forward voltage (@ 1050 mA, 85 °C) v 2.82 3.15 LeD junction temperature °C 150

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED FLuX ChArACtEristiCs - EAsyWhitE ® orDEr CoDEs AnD bins ( tJ = 85 °C) The following table provides order codes for XLamp XP-L2 LeDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 19). nominal CCt Cri Minimum Luminous Flux @1050 mA 2-step 3-step 5-step Min typ Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Group order Code Group order Code Group order Code 5000 K v6 480 527 50e XPLBWT-00-0000- 000Bv650e v5 460 505 XPLBWT-00-0000- 000Bv550e v4 440 483 XPLBWT-00-0000- 000Bv450e v4 440 483 50G XPLBWT-00-0000- 000HV450G v3 420 461 XPLBWT-00-0000- 000HV350G v2 400 439 XPLBWT-00-0000- 000HV250G U6 380 417 50G XPLBWT-00-0000- 000UU650G U5 360 395 XPLBWT-00-0000- 000UU550G 4500 K v6 480 527 45e XPLBWT-00-0000- 000Bv645e v5 460 505 XPLBWT-00-0000- 000Bv545e v4 440 483 XPLBWT-00-0000- 000Bv445e v4 440 483 45G XPLBWT-00-0000- 000HV445G v3 420 461 XPLBWT-00-0000- 000HV345G v2 400 439 XPLBWT-00-0000- 000HV245G U6 380 417 45G XPLBWT-00-0000- 000UU645G U5 360 395 XPLBWT-00-0000- 000UU545G

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED nominal CCt Cri Minimum Luminous Flux @1050 mA 2-step 3-step 5-step Min typ Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Group order Code Group order Code Group order Code 4000 K v6 480 527 40e XPLBWT-00-0000- 000Bv640e v5 460 505 XPLBWT-00-0000- 000Bv540e v4 440 483 XPLBWT-00-0000- 000Bv440e v4 440 483 40G XPLBWT-00-0000- 000HV440G v3 420 461 XPLBWT-00-0000- 000HV340G v2 400 439 XPLBWT-00-0000- 000HV240G U6 380 417 40H XPLBWT-00-0000- 000UU640H 40G XPLBWT-00-0000- 000UU640G U5 360 395 XPLBWT-00-0000- 000UU540H XPLBWT-00-0000- 000UU540G 3500 K v5 460 505 35e XPLBWT-00-0000- 000Bv535e v4 440 483 XPLBWT-00-0000- 000Bv435e v3 420 461 XPLBWT-00-0000- 000Bv335e v3 420 461 35G XPLBWT-00-0000- 000HV335G v2 400 439 XPLBWT-00-0000- 000HV235G U6 380 417 XPLBWT-00-0000- 000HU635G U5 360 395 35H XPLBWT-00-0000- 000UU535H 35G XPLBWT-00-0000- 000UU535G U4 340 373 XPLBWT-00-0000- 000UU435H XPLBWT-00-0000- 000UU435G U3 320 351 XPLBWT-00-0000- 000UU335H XPLBWT-00-0000- 000UU335G FLuX ChArACtEristiCs - EAsyWhitE ® orDEr CoDEs AnD bins ( tJ = 85 °C) - Continued

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED nominal CCt Cri Minimum Luminous Flux @1050 mA 2-step 3-step 5-step Min typ Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Group order Code Group order Code Group order Code 3000 K v4 440 483 30e XPLBWT-00-0000- 000Bv430e v3 420 461 XPLBWT-00-0000- 000Bv330e v2 400 439 30G XPLBWT-00-0000- 000HV230G U6 380 417 XPLBWT-00-0000- 000HU630G U4 340 373 30H XPLBWT-00-0000- 000UU430H 30G XPLBWT-00-0000- 000UU430G U3 320 351 XPLBWT-00-0000- 000UU330H XPLBWT-00-0000- 000UU330G U2 300 329 XPLBWT-00-0000- 000UU230H XPLBWT-00-0000- 000UU230G 2700 K v2 400 439 27G XPLBWT-00-0000- 000HV227G U6 380 417 XPLBWT-00-0000- 000HU627G U5 360 395 XPLBWT-00-0000- 000HU527G U3 320 351 27H XPLBWT-00-0000- 000UU327H 27G XPLBWT-00-0000- 000UU327G U2 300 329 XPLBWT-00-0000- 000UU227H XPLBWT-00-0000- 000UU227G T6 280 307 XPLBWT-00-0000- 000UT627H XPLBWT-00-0000- 000UT627G FLuX ChArACtEristiCs - EAsyWhitE ® orDEr CoDEs AnD bins ( tJ = 85 °C) - Continued

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED FLuX ChArACtEristiCs - Ansi orDEr CoDEs AnD bins ( tJ = 85 °C) The following table provides order codes for XLamp XP-L2 LeDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 19). Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* no Minimum Cri 70 Cri Minimum 80 Cri Minimum 90 Cri Minimum CB 6500 K v6 480 527 XPLBWT-00-0000- 0000v60CB XPLBWT-00-0000- 000Bv60CB v5 460 505 XPLBWT-00-0000- 0000v50CB XPLBWT-00-0000- 000Bv50CB v4 440 483 XPLBWT-00-0000- 0000v40CB XPLBWT-00-0000- 000Bv40CB v3 420 461 XPLBWT-00-0000- 000HV30CB v2 400 439 XPLBWT-00-0000- 000HV20CB U6 380 417 XPLBWT-00-0000- 000UU60CB U5 360 395 XPLBWT-00-0000- 000UU50CB e1 6500 K v6 480 527 XPLBWT-00-0000- 0000v60e1 XPLBWT-00-0000- 000Bv60e1 v5 460 505 XPLBWT-00-0000- 0000v50e1 XPLBWT-00-0000- 000Bv50e1 v4 440 483 XPLBWT-00-0000- 0000v40e1 XPLBWT-00-0000- 000Bv40e1 v3 420 461 XPLBWT-00-0000- 000HV30E1 v2 400 439 XPLBWT-00-0000- 000HV20E1 U6 380 417 XPLBWT-00-0000- 000UU60e1 U5 360 395 XPLBWT-00-0000- 000UU50e1

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* no Minimum Cri 70 Cri Minimum 80 Cri Minimum 90 Cri Minimum DT 5700 K v6 480 527 XPLBWT-00-0000- 0000v60DT XPLBWT-00-0000- 000Bv60DT v5 460 505 XPLBWT-00-0000- 0000v50DT XPLBWT-00-0000- 000Bv50DT v4 440 483 XPLBWT-00-0000- 0000v40DT XPLBWT-00-0000- 000Bv40DT v3 420 461 XPLBWT-00-0000- 000HV30DT v2 400 439 XPLBWT-00-0000- 000HV20DT U6 380 417 XPLBWT-00-0000- 000UU60DT U5 360 395 XPLBWT-00-0000- 000UU50DT Dv 5700 K v6 480 527 XPLBWT-00-0000- 0000v60Dv XPLBWT-00-0000- 000Bv60Dv v5 460 505 XPLBWT-00-0000- 0000v50Dv XPLBWT-00-0000- 000Bv50Dv v4 440 483 XPLBWT-00-0000- 0000v40Dv XPLBWT-00-0000- 000Bv40Dv XPLBWT-00-0000- 000HV40DV v3 420 461 XPLBWT-00-0000- 000HV30DV v2 400 439 XPLBWT-00-0000- 000HV20DV U6 380 417 XPLBWT-00-0000- 000UU60Dv U5 360 395 XPLBWT-00-0000- 000UU50Dv e2 5700 K v6 480 527 XPLBWT-00-0000- 0000v60e2 XPLBWT-00-0000- 000Bv60e2 v5 460 505 XPLBWT-00-0000- 0000v50e2 XPLBWT-00-0000- 000Bv50e2 v4 440 483 XPLBWT-00-0000- 0000v40e2 XPLBWT-00-0000- 000Bv40e2 XPLBWT-00-0000- 000HV40E2 v3 420 461 XPLBWT-00-0000- 000HV30E2 v2 400 439 XPLBWT-00-0000- 000HV20E2 U6 380 417 XPLBWT-00-0000- 000UU60e2 U5 360 395 XPLBWT-00-0000- 000UU50e2 FLuX ChArACtEristiCs - Ansi orDEr CoDEs AnD bins ( tJ = 85 °C) - Continued

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 70 Cri Minimum 80 Cri Minimum 90 Cri Minimum e3 5000 K v6 480 527 XPLBWT-00-0000-000BV60E3 v5 460 505 XPLBWT-00-0000-000BV50E3 v4 440 483 XPLBWT-00-0000-000BV40E3 XPLBWT-00-0000-000HV40E3 v3 420 461 XPLBWT-00-0000-000HV30E3 v2 400 439 XPLBWT-00-0000-000HV20E3 U6 380 417 XPLBWT-00-0000-000UU60E3 U5 360 395 XPLBWT-00-0000-000UU50E3 e4 4500 K v6 480 527 XPLBWT-00-0000-000BV60E4 v5 460 505 XPLBWT-00-0000-000BV50E4 v4 440 483 XPLBWT-00-0000-000BV40E4 XPLBWT-00-0000-000HV40E4 v3 420 461 XPLBWT-00-0000-000HV30E4 v2 400 439 XPLBWT-00-0000-000HV20E4 U6 380 417 XPLBWT-00-0000-000UU60E4 U5 360 395 XPLBWT-00-0000-000UU50E4 e5 4000 K v6 480 527 XPLBWT-00-0000-000BV60E5 v5 460 505 XPLBWT-00-0000-000BV50E5 v4 440 483 XPLBWT-00-0000-000BV40E5 XPLBWT-00-0000-000HV40E5 v3 420 461 XPLBWT-00-0000-000HV30E5 v2 400 439 XPLBWT-00-0000-000HV20E5 U6 380 417 XPLBWT-00-0000-000UU60E5 U5 360 395 XPLBWT-00-0000-000UU50E5 e6 3500 K v5 460 505 XPLBWT-00-0000-000BV50E6 v4 440 483 XPLBWT-00-0000-000BV40E6 v3 420 461 XPLBWT-00-0000-000BV30E6 XPLBWT-00-0000-000HV30E6 v2 400 439 XPLBWT-00-0000-000HV20E6 U6 380 417 XPLBWT-00-0000-000HU60E6 U5 360 395 XPLBWT-00-0000-000UU50E6 U4 340 373 XPLBWT-00-0000-000UU40E6 U3 320 351 XPLBWT-00-0000-000UU30E6 FLuX ChArACtEristiCs - Ansi orDEr CoDEs AnD bins ( tJ = 85 °C) - Continued

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21).
• Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Flux bin Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 70 Cri Minimum 80 Cri Minimum 90 Cri Minimum e7 3000 K v4 440 483 XPLBWT-00-0000-000BV40E7 v3 420 461 XPLBWT-00-0000-000BV30E7 v2 400 439 XPLBWT-00-0000-000HV20E7 U6 380 417 XPLBWT-00-0000-000HU60E7 U5 360 395 U4 340 373 XPLBWT-00-0000-000UU40E7 U3 320 351 XPLBWT-00-0000-000UU30E7 U2 300 329 XPLBWT-00-0000-000UU20E7 e8 2700 K v2 400 439 XPLBWT-00-0000-000HV20E8 U6 380 417 XPLBWT-00-0000-000HU60E8 U5 360 395 XPLBWT-00-0000-000HU50E8 U4 340 373 U3 320 351 XPLBWT-00-0000-000UU30E8 U2 300 329 XPLBWT-00-0000-000UU20E8 T6 280 307 XPLBWT-00-0000-000UT60E8 FLuX ChArACtEristiCs - Ansi orDEr CoDEs AnD bins ( tJ = 85 °C) - Continued

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED rELAtivE sPEC trAL PoWEr Distribution rELAtivE FLuX vs. JunC tion tEMPErA turE (iF = 1050 mA) Relative Spectral Power 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 Relative Radiant Power Wavelength (nm)

5700 K, 70 CRI

3000 K, 80 CRI

Relative Flux Output vs. Junction Temperature 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 Relative Luminous Flux Junction Temperature (ºC)

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED ELEC triCAL ChArACtEristiCs ( tJ = 85 °C) rELAtivE FLuX vs. CurrEnt ( tJ = 85 °C) Electrical Characteristics (Tj = 85°C) 500 1000 1500 2000 2500 3000 Forward Current (mA) Forward Voltage (V) Relative Intensity vs. Current (Tj = 85°C) 50% 100% 150% 200% 250% 0 500 1000 1500 2000 2500 3000 Relative Luminous Flux Forward Current (mA)

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED ReLAtive ChRo MAtiCity vs. CuRRent (W ARM White) ReLAtive ChRo MAtiCity vs. teMpeRA tuRe (W ARM White) Relative Chromaticity Vs. Current -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 500 1000 1500 2000 2500 3000 Current (mA) ΔCCx ΔCCy Relative Chromaticity Vs. Temperature -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED tyPiCAL sPAtiAL Distribution thErMAL DEsiGn The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Typical Spatial Radiation Pattern 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 Relative Luminous Intensity Angle (º) Thermal Design 500 1000 1500 2000 2500 3000 3500 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 4°C/W Rj-a = 7°C/W Rj-a = 10°C/W Rj-a = 15°C/W

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED PErForMAnCE GrouPs - LuMinous FL uX XLamp XP-L2 LEDs are tested for luminous flux and placed into one of the following luminous-flux bins: The flux bins, with a 0 appended, are used in the Bin Code “Luminous flux group.” Luminous Flux bin Minimum Luminous Flux (lm) @ 1050 mA Maximum Luminous Flux (lm) @ 1050 mA T6 280 300 U2 300 320 U3 320 340 U4 340 360 U5 360 380 U6 380 400 v2 400 420 v3 420 440 v4 440 460 v5 460 480 v6 480 500 W2 500 520

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED PErForMAnCE GrouPs - ChroMA tiCity region x y region x y region x y region x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.2984 0.3133 0.2980 0.2880 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3702 0.3722 0.3736 0.3874 0.3870 0.3958 0.3825 0.3798

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED region x y region x y region x y region x y 0.3941 0.3848 0.3996 0.4015 0.4146 0.4089 0.4080 0.3916 0.4221 0.3985 0.4299 0.4165 0.4430 0.4212 0.4342 0.4028 0.4465 0.4071 0.4562 0.4260 0.4687 0.4289 0.4582 0.4099 CrEE’s EAsyWhitE ® Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 CCy CCx ANSI C78.377 Quadrangle EasyWhite 5-Step EasyWhite 3-Step EasyWhite 2-Step PErForMAnCE GrouPs – Chro MAtiCity - ContinuED

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED CrEE’s Ansi Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A CB 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A DT 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A DV

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 5700 K 6500 K 8000 K 7D 8A 8B 8C 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A CrEE’s Ansi Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions - ContinuED

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED CrEE’s stAnDArD Chro MAtiCity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color CCt Kit Chromaticity bins Cool White

6500 K CB 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U

6500 K e1 1A, 1B, 1C, 1D

5700 K DT 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U

5700 K Dv 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U

5700 K e2 2A, 2B, 2C, 2D

5000 K e3 3A, 3B, 3C, 3D

4500 K e4 4A, 4B, 4C, 4D

4000 K e5 5A, 5B, 5C, 5D

3500 K e6 6A, 6B, 6C, 6D

3000 K e7 7A, 7B, 7C, 7D

2700 K e8 8A, 8B, 8C, 8D

bin AnD orDEr CoDE ForMA ts XP-L2 bin codes and order codes are configured in the following manner: order Code bin Code SSSCCC-BD-HHHH-HHHNFFNNN Series XPL = XP-L CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Chromaticity group Luminous flux bin Internal code Color BWT = Gen 2 White Series XPL = XP-L Internal code Luminous flux group CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Internal code Chromaticity group Color BWT = Gen 2 White SSSCCC-B-WWW-FFF-GN-AAAA order code & bin code headings and diagrams are in a table

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED rEFLoW soLDErinG ChArACtEristiCs In testing, Cree has found XLamp XP-L2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. IPC/JEDEC J-STD-020C TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED notEs Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. pre-Release Qualification testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life (RTOL) testing on the XP-L2 LeD. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. Moisture sensitivity Cree recommends keeping XLamp LeDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-L2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP . uL® recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LeDs and eye safety, please refer to the LeD eye Safety application note.

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED MECh AniCAL DiMEnsions All measurements are ±.13 mm unless otherwise indicated. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.300 REF. 3.300 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.300 REF. 3.300 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE top view side view bottom view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.300 REF. 3.300 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE Anode SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.300 REF. 3.300 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE recommended PCb solder Pad recommended stencil Pattern (hatched Area is open)

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED tAPE AnD rEEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. Except as noted, all dimensions in mm [inches] SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE Loaded Pockets (500 Lamps) Leader 400 mm (min.) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) Trailer 160 mm (min.) of empty pockets sealed with tape (20 pockets min.) STARTEND User Feed Direction Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) STARTEND Cathode Side Anode Side (denoted by + and circle) 160.0 A A B 2.5±.1 SECTION A-A SCALE 2 : 1 1.5±.1 8.0±.1 4.0±.1 1.75±.10 12.0 .0 +.3 DETAIL B SCALE 2 : 1 13mm Cover Tape Pocket Tape User Feed Direction User Feed Direction

Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ and the Cree logo are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L2 LED PACKAGinG Patent Label (on bottom of box) Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Code, Quantity, Reel ID Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Unpackaged Reel Packaged Reel Boxed Reel CREE Bin Code & Barcode Label Vacuum-Sealed Moisture Barrier Bag Label with Customer P/N, Qty, Lot #, PO # Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Patent Label Label with Customer Order Code, Qty, Reel ID, PO #