XP-L CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 35

Technical content

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.CRee. Com/XLAmp CLD-DS97 Rev 4D Cree® XLamp® XP-L LEDs XP-L High Density LED XP-L High Intensity LED ProDuCt DEsCrIPtIon XLamp® XP-L LeDs are available in two versions: High Density and High Intensity. The XLamp ® XP-L High Density (HD) LeD is the highest performing discrete in Cree’s High Density (HD) class of LeDs, delivering the next generation of lumen output and efficacy in the compact 3.45 mm x 3.45 mm XP footprint. Cree’s HD LeDs, optimized to deliver maximum lumen output in a small form factor, enable lighting manufacturers to improve the performance of any lighting design, create smaller and less expensive systems, and develop new lighting solutions that were previously not possible. The XLamp XP-L High Intensity (HI) LeD is the first of Cree’s new class of High Intensity (HI) LeDs optimized to deliver maximum candela through secondary optics. Built on Cree’s breakthrough SC5 Technology™ Platform, the XP-L HI LeD delivers 120 percent more candela than the XP-L HD LeD through the same optic. The XP-L HI LeD leverages the industry’s highest single-die performance and a new innovative primary optic design that radically reduces the optical source size to deliver both lumens and intensity.

FEAturEs

  • Available in white, 70-CRI white, 80-CRI white, 85 CRI white and 90-CRI white
  • ANSI-compatible chromaticity bins
  • Binned at 85 °C
  • Maximum drive current: 3000 mA
  • Low thermal resistance: 2.2 °C/W
  • Wide viewing angle: 125° (XP-L High Density), 115° (XP-L High Intensity)
  • Unlimited floor life at ≤ 30 ºC/85% RH
  • Reflow solderable - JEDEC J-STD-020C
  • electrically neutral thermal path
  • RoHS and ReACh compliant
  • UL ® recognized component (e349212) tAbLE oF ContEnts Flux Characteristics - XP-L High Density ...3 Flux Characteristics - XP-L High Intensity .8 Relative Flux vs. Junction Temperature ..12 Relative Chromaticity vs. Temperature ...15 Performance Groups – Luminous Flux... 17 Cree’s Standard Chromaticity Regions Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CHArAC tErIstICs Characteristics unit Minimum typical Maximum Thermal resistance, junction to solder point °C/W 2.2 Viewing angle (FWHM) - XP-L High Density degrees 125 Viewing angle (FWHM) - XP-L High Intensity degrees 115 Temperature coefficient of voltage mV/°C -2 eSD withstand voltage (HBM per Mil-Std-883D) v 8000 DC forward current mA 3000 Reverse voltage v -5 Forward voltage (@ 1050 mA, 85 °C) v 2.95 3.25 LeD junction temperature °C 150

  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED FLuX CHArAC tErIstICs - XP-L HIgH DEnsI ty (tJ = 85 °C) The following table provides order codes for XLamp XP-L High Density LeDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 26). Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CrI typical 70 CrI Minimum 51 6200 K v6 480 535 XPLAWT-00-0000-0000V6051 XPLAWT-00-0000-000BV6051 v5 460 513 XPLAWT-00-0000-0000V5051 XPLAWT-00-0000-000BV5051 v4 440 491 XPLAWT-00-0000-0000V4051 XPLAWT-00-0000-000BV4051 v3 420 468 XPLAWT-00-0000-0000V3051 XPLAWT-00-0000-000BV3051 v2 400 446 XPLAWT-00-0000-000BV2051 53 6000 K v6 480 535 XPLAWT-00-0000-0000V6053 XPLAWT-00-0000-000BV6053 v5 460 513 XPLAWT-00-0000-0000V5053 XPLAWT-00-0000-000BV5053 v4 440 491 XPLAWT-00-0000-0000V4053 XPLAWT-00-0000-000BV4053 v3 420 468 XPLAWT-00-0000-0000V3053 XPLAWT-00-0000-000BV3053 v2 400 446 XPLAWT-00-0000-000BV2053 50 6200 K v6 480 535 XPLAWT-00-0000-0000V6050 XPLAWT-00-0000-000BV6050 v5 460 513 XPLAWT-00-0000-0000V5050 XPLAWT-00-0000-000BV5050 v4 440 491 XPLAWT-00-0000-0000V4050 XPLAWT-00-0000-000BV4050 v3 420 468 XPLAWT-00-0000-0000V3050 XPLAWT-00-0000-000BV3050 v2 400 446 XPLAWT-00-0000-000BV2050 e1 6500 K v6 480 535 XPLAWT-00-0000-0000V60E1 XPLAWT-00-0000-000BV60E1 v5 460 513 XPLAWT-00-0000-0000V50E1 XPLAWT-00-0000-000BV50E1 v4 440 491 XPLAWT-00-0000-0000V40E1 XPLAWT-00-0000-000BV40E1 v3 420 468 XPLAWT-00-0000-0000V30E1 XPLAWT-00-0000-000BV30E1 v2 400 446 XPLAWT-00-0000-000BV20E1 e2 5700 K v6 480 535 XPLAWT-00-0000-0000V60E2 XPLAWT-00-0000-000BV60E2 v5 460 513 XPLAWT-00-0000-0000V50E2 XPLAWT-00-0000-000BV50E2 v4 440 491 XPLAWT-00-0000-0000V40E2 XPLAWT-00-0000-000BV40E2 v3 420 468 XPLAWT-00-0000-000BV30E2 v2 400 446 XPLAWT-00-0000-000BV20E2
  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 70 CrI Minimum 75 CrI typical 80 CrI Minimum e3 5000 K v6 480 535 XPLAWT-00-0000-000BV60E3 v5 460 513 XPLAWT-00-0000-000BV50E3 XPLAWT-00-0000-000LV50E3 v4 440 491 XPLAWT-00-0000-000BV40E3 XPLAWT-00-0000-000LV40E3 v3 420 468 XPLAWT-00-0000-000BV30E3 XPLAWT-00-0000-000LV30E3 v2 400 446 XPLAWT-00-0000-000BV20E3 XPLAWT-00-0000-000LV20E3 F4 4750 K v6 480 535 XPLAWT-00-0000-000BV60F4 v5 460 513 XPLAWT-00-0000-000BV50F4 XPLAWT-00-0000-000LV50F4 v4 440 491 XPLAWT-00-0000-000BV40F4 XPLAWT-00-0000-000LV40F4 v3 420 468 XPLAWT-00-0000-000BV30F4 XPLAWT-00-0000-000LV30F4 v2 400 446 XPLAWT-00-0000-000BV20F4 XPLAWT-00-0000-000LV20F4 e4 4500 K v6 480 535 XPLAWT-00-0000-000BV60E4 v5 460 513 XPLAWT-00-0000-000BV50E4 XPLAWT-00-0000-000LV50E4 v4 440 491 XPLAWT-00-0000-000BV40E4 XPLAWT-00-0000-000LV40E4 v3 420 468 XPLAWT-00-0000-000BV30E4 XPLAWT-00-0000-000LV30E4 v2 400 446 XPLAWT-00-0000-000BV20E4 XPLAWT-00-0000-000LV20E4 F5 4250 K v6 480 535 XPLAWT-00-0000-000BV60F5 v5 460 513 XPLAWT-00-0000-000BV50F5 XPLAWT-00-0000-000LV50F5 v4 440 491 XPLAWT-00-0000-000BV40F5 XPLAWT-00-0000-000LV40F5 v3 420 468 XPLAWT-00-0000-000BV30F5 XPLAWT-00-0000-000LV30F5 v2 400 446 XPLAWT-00-0000-000BV20F5 XPLAWT-00-0000-000LV20F5 e5 4000 K v6 480 535 XPLAWT-00-0000-000BV60E5 v5 460 513 XPLAWT-00-0000-000BV50E5 v4 440 491 XPLAWT-00-0000-000BV40E5 XPLAWT-00-0000-000LV40E5 XPLAWT-00-0000-000HV40E5 v3 420 468 XPLAWT-00-0000-000BV30E5 XPLAWT-00-0000-000LV30E5 XPLAWT-00-0000-000HV30E5 v2 400 446 XPLAWT-00-0000-000BV20E5 XPLAWT-00-0000-000LV20E5 XPLAWT-00-0000-000HV20E5 U6 380 424 XPLAWT-00-0000-000BU60E5 XPLAWT-00-0000-000LU60E5 XPLAWT-00-0000-000HU60E5 U5 360 401 XPLAWT-00-0000-000HU50E5 Z5 4000 K v4 440 491 XPLAWT-00-0000-000BV40Z5 XPLAWT-00-0000-000LV40Z5 XPLAWT-00-0000-000HV40Z5 v3 420 468 XPLAWT-00-0000-000BV30Z5 XPLAWT-00-0000-000LV30Z5 XPLAWT-00-0000-000HV30Z5 v2 400 446 XPLAWT-00-0000-000BV20Z5 XPLAWT-00-0000-000LV20Z5 XPLAWT-00-0000-000HV20Z5 U6 380 424 XPLAWT-00-0000-000BU60Z5 XPLAWT-00-0000-000LU60Z5 XPLAWT-00-0000-000HU60Z5 U5 360 401 XPLAWT-00-0000-000HU50Z5 FLuX CHArAC tErIstICs - XP-L HIgH DEnsI ty (tJ = 85 °C) - Continued
  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 70 CrI Minimum 75 CrI typical 80 CrI Minimum F6 3700 K v4 440 491 XPLAWT-00-0000-000HV40F6 v3 420 468 XPLAWT-00-0000-000LV30F6 XPLAWT-00-0000-000HV30F6 v2 400 446 XPLAWT-00-0000-000LV20F6 XPLAWT-00-0000-000HV20F6 U6 380 424 XPLAWT-00-0000-000LU60F6 XPLAWT-00-0000-000HU60F6 U5 360 401 XPLAWT-00-0000-000LU50F6 XPLAWT-00-0000-000HU50F6 Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C*

80 CrI typical 80 CrI Minimum 85 CrI Minimum 90 CrI Minimum

v3 420 468 XPLAWT-00-0000- 000Lv30e6 XPLAWT-00-0000- 000Hv30e6 v2 400 446 XPLAWT-00-0000- 000Lv20e6 XPLAWT-00-0000- 000Hv20e6 U6 380 424 XPLAWT-00-0000- 000LU60e6 XPLAWT-00-0000- 000HU60e6 U5 360 401 XPLAWT-00-0000- 000LU50e6 XPLAWT-00-0000- 000HU50e6 Z6 3500 K v2 400 446 XPLAWT-00-0000- 000Lv20Z6 XPLAWT-00-0000- 000Hv20Z6 U6 380 424 XPLAWT-00-0000- 000LU60Z6 XPLAWT-00-0000- 000HU60Z6 U5 360 401 XPLAWT-00-0000- 000LU50Z6 XPLAWT-00-0000- 000HU50Z6 F7 3250 K v2 400 446 XPLAWT-00-0000- 000Lv20F7 XPLAWT-00-0000- 000Hv20F7 U6 380 424 XPLAWT-00-0000- 000LU60F7 XPLAWT-00-0000- 000HU60F7 U5 360 401 XPLAWT-00-0000- 000LU50F7 XPLAWT-00-0000- 000HU50F7 U4 340 379 XPLAWT-00-0000- 000LU40F7 XPLAWT-00-0000- 000HU40F7 FLuX CHArAC tErIstICs - XP-L HIgH DEnsI ty (tJ = 85 °C) - Continued

  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C*

v2 400 446 XPLAWT-00-0000- 000Lv20e7 XPLAWT-00-0000- 000Hv20e7 U6 380 424 XPLAWT-00-0000- 000LU60e7 XPLAWT-00-0000- 000HU60e7 U5 360 401 XPLAWT-00-0000- 000LU50e7 XPLAWT-00-0000- 000HU50e7 U4 340 379 XPLAWT-00-0000- 000LU40e7 XPLAWT-00-0000- 000HU40e7 U3 320 357 XPLAWT-00-0000- 000PU30e7 XPLAWT-00-0000- 000UU30e7 U2 300 334 XPLAWT-00-0000- 000PU20e7 XPLAWT-00-0000- 000UU20e7 T6 280 312 XPLAWT-00-0000- 000PT60e7 XPLAWT-00-0000- 000UT60e7 Z7 3000 K U6 380 424 XPLAWT-00-0000- 000LU60Z7 XPLAWT-00-0000- 000HU60Z7 U5 360 401 XPLAWT-00-0000- 000LU50Z7 XPLAWT-00-0000- 000HU50Z7 U4 340 379 XPLAWT-00-0000- 000LU40Z7 XPLAWT-00-0000- 000HU40Z7 U3 320 357 XPLAWT-00-0000- 000PU30Z7 XPLAWT-00-0000- 000UU30Z7 U2 300 334 XPLAWT-00-0000- 000PU20Z7 XPLAWT-00-0000- 000UU20Z7 T6 280 312 XPLAWT-00-0000- 000PT60Z7 XPLAWT-00-0000- 000UT60Z7 F8 2850 K v2 400 446 XPLAWT-00-0000- 000Lv20F8 U6 380 424 XPLAWT-00-0000- 000LU60F8 XPLAWT-00-0000- 000HU60F8 U5 360 401 XPLAWT-00-0000- 000LU50F8 XPLAWT-00-0000- 000HU50F8 U4 340 379 XPLAWT-00-0000- 000LU40F8 XPLAWT-00-0000- 000HU40F8 U3 320 357 XPLAWT-00-0000- 000PU30F8 XPLAWT-00-0000- 000UU30F8 U2 300 334 XPLAWT-00-0000- 000PU20F8 XPLAWT-00-0000- 000UU20F8 T6 280 312 XPLAWT-00-0000- 000PT60F8 XPLAWT-00-0000- 000UT60F8 T5 260 290 XPLAWT-00-0000- 000PT50F8 XPLAWT-00-0000- 000UT50F8 FLuX CHArAC tErIstICs - XP-L HIgH DEnsI ty (tJ = 85 °C) - Continued

  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C*

v2 400 446 XPLAWT-00-0000- 000Lv20e8 U6 380 424 XPLAWT-00-0000- 000LU60e8 XPLAWT-00-0000- 000HU60e8 U5 360 401 XPLAWT-00-0000- 000LU50e8 XPLAWT-00-0000- 000HU50e8 U4 340 379 XPLAWT-00-0000- 000LU40e8 XPLAWT-00-0000- 000HU40e8 U3 320 357 XPLAWT-00-0000- 000PU30e8 XPLAWT-00-0000- 000UU30e8 U2 300 334 XPLAWT-00-0000- 000PU20e8 XPLAWT-00-0000- 000UU20e8 T6 280 312 XPLAWT-00-0000- 000PT60e8 XPLAWT-00-0000- 000UT60e8 T5 260 290 XPLAWT-00-0000- 000PT50e8 XPLAWT-00-0000- 000UT50e8 Z8 2700 K U6 380 424 XPLAWT-00-0000- 000LU60Z8 U5 360 401 XPLAWT-00-0000- 000LU50Z8 XPLAWT-00-0000- 000HU50Z8 U4 340 379 XPLAWT-00-0000- 000LU40Z8 XPLAWT-00-0000- 000HU40Z8 U3 320 357 U2 300 334 XPLAWT-00-0000- 000PU20Z8 XPLAWT-00-0000- 000UU20Z8 T6 280 312 XPLAWT-00-0000- 000PT60Z8 XPLAWT-00-0000- 000UT60Z8 T5 260 290 XPLAWT-00-0000- 000PT50Z8 XPLAWT-00-0000- 000UT50Z8 FLuX CHArAC tErIstICs - XP-L HIgH DEnsI ty (tJ = 85 °C) - Continued

  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED FLuX CHArAC tErIstICs - XP-L HIgH IntEnsI ty (tJ = 85 °C) The following table provides order codes for XLamp XP-L High Intensity LeDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 26). Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CrI typical 70 CrI Minimum 51 6200 K v2 400 446 XPLAWT-H0-0000-0000V2051 XPLAWT-H0-0000-000BV2051 U6 380 424 XPLAWT-H0-0000-0000U6051 XPLAWT-H0-0000-000BU6051 U5 360 401 XPLAWT-H0-0000-0000U5051 XPLAWT-H0-0000-000BU5051 53 6000 K v2 400 446 XPLAWT-H0-0000-0000V2053 XPLAWT-H0-0000-000BV2053 U6 380 424 XPLAWT-H0-0000-0000U6053 XPLAWT-H0-0000-000BU6053 U5 360 401 XPLAWT-H0-0000-0000U5053 XPLAWT-H0-0000-000BU5053 50 6200 K v2 400 446 XPLAWT-H0-0000-0000V2050 XPLAWT-H0-0000-000BV2050 U6 380 424 XPLAWT-H0-0000-0000U6050 XPLAWT-H0-0000-000BU6050 U5 360 401 XPLAWT-H0-0000-0000U5050 XPLAWT-H0-0000-000BU5050 e1 6500 K v2 400 446 XPLAWT-H0-0000-0000V20E1 XPLAWT-H0-0000-000BV20E1 U6 380 424 XPLAWT-H0-0000-0000U60E1 XPLAWT-H0-0000-000BU60E1 U5 360 401 XPLAWT-H0-0000-0000U50E1 XPLAWT-H0-0000-000BU50E1 e2 5700 K v2 400 446 XPLAWT-H0-0000-0000V20E2 XPLAWT-H0-0000-000BV20E2 U6 380 424 XPLAWT-H0-0000-0000U60E2 XPLAWT-H0-0000-000BU60E2 U5 360 401 XPLAWT-H0-0000-0000U50E2 XPLAWT-H0-0000-000BU50E2
  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 70 CrI Minimum 75 CrI typical 80 CrI Minimum e3 5000 K v2 400 446 XPLAWT-H0-0000-000BV20E3 XPLAWT-H0-0000-000LV20E3 U6 380 424 XPLAWT-H0-0000-000BU60E3 XPLAWT-H0-0000-000LU60E3 U5 360 401 XPLAWT-H0-0000-000BU50E3 XPLAWT-H0-0000-000LU50E3 F4 4750 K v2 400 446 XPLAWT-H0-0000-000BV20F4 XPLAWT-H0-0000-000LV20F4 U6 380 424 XPLAWT-H0-0000-000BU60F4 XPLAWT-H0-0000-000LU60F4 U5 360 401 XPLAWT-H0-0000-000BU50F4 XPLAWT-H0-0000-000LU50F4 e4 4500 K v2 400 446 XPLAWT-H0-0000-000BV20E4 XPLAWT-H0-0000-000LV20E4 U6 380 424 XPLAWT-H0-0000-000BU60E4 XPLAWT-H0-0000-000LU60E4 U5 360 401 XPLAWT-H0-0000-000BU50E4 XPLAWT-H0-0000-000LU50E4 F5 4250 K v2 400 446 XPLAWT-H0-0000-000BV20F5 XPLAWT-H0-0000-000LV20F5 U6 380 424 XPLAWT-H0-0000-000BU60F5 XPLAWT-H0-0000-000LU60F5 U5 360 401 XPLAWT-H0-0000-000BU50F5 XPLAWT-H0-0000-000LU50F5 e5 4000 K v2 400 446 XPLAWT-H0-0000-000BV20E5 XPLAWT-H0-0000-000LV20E5 U6 380 424 XPLAWT-H0-0000-000BU60E5 XPLAWT-H0-0000-000LU60E5 XPLAWT-H0-0000-000HU60E5 U5 360 401 XPLAWT-H0-0000-000BU50E5 XPLAWT-H0-0000-000LU50E5 XPLAWT-H0-0000-000HU50E5 U4 340 379 XPLAWT-H0-0000-000BU40E5 XPLAWT-H0-0000-000LU40E5 XPLAWT-H0-0000-000HU40E5 F6 3700 K U5 360 401 XPLAWT-H0-0000-000LU50F6 XPLAWT-H0-0000-000HU50F6 U4 340 379 XPLAWT-H0-0000-000LU40F6 XPLAWT-H0-0000-000HU40F6 U3 320 357 XPLAWT-H0-0000-000LU30F6 XPLAWT-H0-0000-000HU30F6 FLuX CHArAC tErIstICs - XP-L HIgH IntEnsI ty (tJ = 85 °C) - Continued
  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C*

U5 360 401 XPLAWT-H0-0000- 000LU50e6 XPLAWT-H0-0000- 000HU50e6 U4 340 379 XPLAWT-H0-0000- 000LU40e6 XPLAWT-H0-0000- 000HU40e6 U3 320 357 XPLAWT-H0-0000- 000LU30e6 XPLAWT-H0-0000- 000HU30e6 F7 3250 K U4 340 379 XPLAWT-H0-0000- 000LU40F7 XPLAWT-H0-0000- 000HU40F7 U3 320 357 XPLAWT-H0-0000- 000LU30F7 XPLAWT-H0-0000- 000HU30F7 U2 300 334 XPLAWT-H0-0000- 000LU20F7 XPLAWT-H0-0000- 000HU20F7 e7 3000 K U4 340 379 XPLAWT-H0-0000- 000LU40e7 XPLAWT-H0-0000- 000HU40e7 U3 320 357 XPLAWT-H0-0000- 000LU30e7 XPLAWT-H0-0000- 000HU30e7 U2 300 334 XPLAWT-H0-0000- 000LU20e7 XPLAWT-H0-0000- 000HU20e7 T6 280 312 XPLAWT-H0-0000- 000PT60e7 XPLAWT-H0-0000- 000UT60e7 T5 260 290 XPLAWT-H0-0000- 000PT50e7 XPLAWT-H0-0000- 000UT50e7 T4 240 268 XPLAWT-H0-0000- 000PT40e7 XPLAWT-H0-0000- 000UT40e7 F8 2850 K U4 340 379 XPLAWT-H0-0000- 000LU40F8 XPLAWT-H0-0000- 000HU40F8 U3 320 357 XPLAWT-H0-0000- 000LU30F8 XPLAWT-H0-0000- 000HU30F8 U2 300 334 XPLAWT-H0-0000- 000LU20F8 XPLAWT-H0-0000- 000HU20F8 T6 280 312 XPLAWT-H0-0000- 000PT60F8 T5 260 290 XPLAWT-H0-0000- 000PT50F8 XPLAWT-H0-0000- 000UT50F8 T4 240 268 XPLAWT-H0-0000- 000PT40F8 XPLAWT-H0-0000- 000UT40F8 T3 220 245 XPLAWT-H0-0000- 000PT30F8 FLuX CHArAC tErIstICs - XP-L HIgH IntEnsI ty (tJ = 85 °C) - Continued

  • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
  • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED Chromaticity Minimum Luminous Flux (lm) @ 1050 mA order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C*

U4 340 379 XPLAWT-H0-0000- 000LU40e8 U3 320 357 XPLAWT-H0-0000- 000LU30e8 XPLAWT-H0-0000- 000HU30e8 U2 300 334 XPLAWT-H0-0000- 000LU20e8 XPLAWT-H0-0000- 000HU20e8 T6 280 312 XPLAWT-H0-0000- 000PT60e8 T5 260 290 XPLAWT-H0-0000- 000PT50e8 XPLAWT-H0-0000- 000UT50e8 T4 240 268 XPLAWT-H0-0000- 000PT40e8 XPLAWT-H0-0000- 000UT40e8 T3 220 245 XPLAWT-H0-0000- 000PT30e8 FLuX CHArAC tErIstICs - XP-L HIgH IntEnsI ty (tJ = 85 °C) - Continued

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED rELAtIvE sPEC trAL PowEr DIstrIbutIon rELAtIvE FLuX vs. JunC tIon tEMPErA turE (IF = 1050 mA) Relative Spectral Power 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm)

5000 K - 8300 K CCT

3700 K - 5000 K CCT

2600 K - 3700 K CCT

Relative Flux Output vs. Junction Temperature 100 120 25 50 75 100 125 150 Relative Luminous Flux (%) Junction Temperature (ºC)

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED ELEC trICAL CHArAC tErIstICs ( tJ = 85 °C) rELAtIvE FLuX vs. CurrEnt ( tJ = 85 °C) Electrical Characteristics (Tj = 85°C) 500 1000 1500 2000 2500 3000 Forward Current (mA) Forward Voltage (V) Relative Intensity vs. Current (Tj = 85°C) 100 150 200 250 0 500 1000 1500 2000 2500 3000 Relative Luminous Flux (%) Forward Current (mA)

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED ReLAtive ChRo MAtiCity vs. CuRRent (W ARM White) Relative Chromaticity Vs. Current, HD -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 500 1000 1500 2000 2500 3000 Current (mA) ΔCCx ΔCCy XP-L High Density Relative Chromaticity Vs. Current, HI -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 500 1000 1500 2000 2500 3000 Current (mA) ΔCCx ΔCCy XP-L High Intensity

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED ReLAtive ChRo MAtiCity vs. teMpeRA tuRe (W ARM White) Relative Chromaticity Vs. Temperature, HD -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy XP-L High Density Relative Chromaticity Vs. Temperature, HI -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy XP-L High Intensity

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED tyPICAL sPAtIAL DIstrIbutIon tHErMAL DEsIgn The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Typical Spatial Radiation Pattern 100 -90 -70 -50 -30 -10 10 30 50 70 90 Relative Luminous Intensity (%) Angle (º) XP-L High Density XP-L High Intensity Thermal Design Cool White 500 1000 1500 2000 2500 3000 3500 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 4°C/W Rj-a = 7°C/W Rj-a = 10°C/W Rj-a = 15°C/W

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED PErForMAnCE grouPs – LuMInous FL uX XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: group Code Minimum Luminous Flux (lm) @ 1050 mA Maximum Luminous Flux (lm) @ 1050 mA T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 U3 320 340 U4 340 360 U5 360 380 U6 380 400 v2 400 420 v3 420 440 v4 440 460 v5 460 480 v6 480 500 W2 500 520 W3 520 540

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED PErForMAnCE grouPs – CHro MAtICI ty region x y region x y region x y region x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.2984 0.3133 0.2980 0.2880 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3371 0.3490 0.3376 0.3616 0.3366 0.3369 0.3381 0.3762 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3512 0.3465 0.3571 0.3907 0.3668 0.3957 0.3590 0.3521

peRFo RMAnCe GRoups – ChRo MAtiCity ( Continued) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED region x y region x y region x y region x y 5A1 0.3670 0.3578 5A2 0.3686 0.3649 5A3 0.3744 0.3685 5A4 0.3726 0.3612 5B1 0.3702 0.3722 5B2 0.3719 0.3797 5B3 0.3782 0.3837 5B4 0.3763 0.3760 5C1 0.3825 0.3798 5C2 0.3847 0.3877 5C3 0.3912 0.3917 5C4 0.3887 0.3836 5D1 0.3783 0.3646 5D2 0.3804 0.3721 5D3 0.3863 0.3758 5D4 0.3840 0.3681 6A1 0.3889 0.3690 6A2 0.3915 0.3768 6A3 0.3981 0.3800 6A4 0.3953 0.3720 6B1 0.3941 0.3848 6B2 0.3968 0.3930 6B3 0.4040 0.3966 6B4 0.4010 0.3882 6C1 0.4080 0.3916 6C2 0.4113 0.4001 6C3 0.4186 0.4037 6C4 0.4150 0.3950 6D1 0.4017 0.3751 6D2 0.4048 0.3832 6D3 0.4116 0.3865 6D4 0.4082 0.3782 7A1 0.4147 0.3814 7A2 0.4183 0.3898 7A3 0.4242 0.3919 7A4 0.4203 0.3833

peRFo RMAnCe GRoups – ChRo MAtiCity ( Continued) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED region x y region x y region x y region x y 7B1 0.4221 0.3984 7B2 0.4259 0.4073 7B3 0.4322 0.4096 7B4 0.4281 0.4006 7C1 0.4342 0.4028 7C2 0.4385 0.4119 7C3 0.4449 0.4141 7C4 0.4403 0.4049 7D1 0.4259 0.3853 7D2 0.4300 0.3939 7D3 0.4359 0.3960 7D4 0.4316 0.3873 8A1 0.4373 0.3893 8A2 0.4418 0.3981 8A3 0.4475 0.3994 8A4 0.4428 0.3906 8B1 0.4465 0.4071 8B2 0.4513 0.4164 8B3 0.4573 0.4178 8B4 0.4523 0.4085 8C1 0.4582 0.4099 8C2 0.4634 0.4193 8C3 0.4695 0.4207 8C4 0.4641 0.4112 8D1 0.4483 0.3919 8D2 0.4532 0.4008 8D3 0.4589 0.4021 8D4 0.4538 0.3931

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD CHro MAtICI ty rEgIons PL ottED on tHE 1931 CIE CurvE ANSI Cool White Neutral White 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 3500 K 4000 K 4500 K 5000 K 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 CCy CCx ANSI C78.377A

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD CHro MAtICI ty rEgIons PL ottED on tHE 1931 CIE CurvE - ContInuED ANSI Neutral White and ANSI Warm White 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD CooL wHItE KIts PLottED on AnsI st AnDArD CHro MAtICI ty rEgIons 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD wArM AnD nEutrAL wHItE KIts PLottED on AnsI st AnDArD CHro MAtICI ty rEgIons 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A E8E7 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD wArM AnD nEutrAL wHItE KIts PLottED on AnsI st AnDArD CHro MAtICI ty rEgIons - ContInuED 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED CrEE’s stAnDArD CHro MAtICI ty KI ts The following table provides the chromaticity bins associated with chromaticity kits. Color CCt Kit Chromaticity bins Cool White 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S

6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S

6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D

6500 K e1 1A, 1B, 1C, 1D

5700 K e2 2A, 2B, 2C, 2D

5000 K e3 3A, 3B, 3C, 3D

4750 K F4 3C, 3D, 4A, 4B

4500 K e4 4A, 4B, 4C, 4D

4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4

4000 K e5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4

4000 K Z5 5A3, 5B4, 5C1, 5D2

3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4

3500 K e6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4

3500 K Z6 6A3, 6B4, 6C1, 6D2

3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4

3000 K e7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4

3000 K Z7 7A3, 7B4, 7C1, 7D2

2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4

2700 K e8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4

2700 K Z8 8A3, 8B4, 8C1, 8D2

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED bIn AnD orDEr CoDE ForMA ts XP-L bin codes and order codes are configured in the following manner: order Code bin Code SSSCCC-BD-HHHH-HHHNFFNNN Series XPL = XP-L Class 0 = High density H = High intensity CRI specification 0 = Cool White B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Chromaticity group Luminous flux group Internal code Color AWT = White Series XPL = XP-L Class 0 = High density H = High intensity Luminous flux group CRI specification 0 = Cool White B = 70 CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Internal code Chromaticity group Color AWT = White SSSCCC-B-WWW-FFF-GN-AAAA

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED rEFLow so LDErIng CHArAC tErIstICs In testing, Cree has found XLamp XP-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. IPC/JEDEC J-STD-020C TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED notEs Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. pre-Release Qualification testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. Moisture sensitivity Cree recommends keeping XLamp LeDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP . roHs Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. rEACh Compliance ReACh substances of very high concern (SvHCs) information is available for this product. Since the european Chemical Agency (eCHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date ReACh Declaration. ReACh banned substance information (ReACh Article 67) is also available upon request.

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED uL® recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LeDs and eye safety, please refer to the LeD eye Safety application note. notEs - ContInuED

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED MECHAnICAL DIMEnsIons All measurements are ±.13 mm unless otherwise indicated. XP-L High Density XPLAWT-00-xxxx-xxxxxxxxx High Density Alternate bottom views of the XP-L High Density LeD are shown in the diagrams below. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE Top view Side view Bottom view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50.50 3.45 ±.2 mm 3.45 ±.2 mm 2.68 R1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 3.30 REF. 1/122.000 C2610-00040 OUTLINE DRAWING XPL 3/26/14D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE ALTERNATIVE ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE Bottom viewBottom viewBottom view Anode

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED MECHAnICAL DIMEnsIons - ContInuED XP-L High Intensity XPLAWT-H0-xxxx-xxxxxxxxx High Intensity XP-L High Density & High Intensity Top view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1/122.000 E2610-00056 OUTLINE DRAWING XPL 3/13/15D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1/122.000 E2610-00056 OUTLINE DRAWING XPL 3/13/15D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1/122.000 E2610-00056 OUTLINE DRAWING XPL 3/13/15D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED OPTICAL REFERENCE OPTICAL REFERENCE Side view Bottom view Anode Recommended PCB Solder Pad Recommended Stencil Pattern (Hatched Area Is Open) SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1/122.000 E2610-00056 OUTLINE DRAWING XPL 3/13/15D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1/122.000 E2610-00056 OUTLINE DRAWING XPL 3/13/15D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED OPTICAL REFERENCE OPTICAL REFERENCE

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED tAPE AnD rEEL All Cree carrier tapes conform to eIA-481D, Automated Component Handling Systems Standard. except as noted, all dimensions in mm [inches] XP-L High Density XPLAWT-00-xxxx-xxxxxxxxx High Density Anode Side SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 3456 6 5 4 3 2 1 A B C Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 1/11.000 A2402-00040 Carrier Tape, XPL 5/16/14 D. CRONIN .30 [.012] T Ao 3.60 [.142] 3.00 [.118] Ko 3.0 ° 3.0 ° 3.60 [.142] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø1.50 +.10 -.00 Ø1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE CATHODE SIDE ANODE SIDE Loaded Pockets (500 Lamps) Leader 400 mm (min.) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) Trailer 160 mm (min.) of empty pockets sealed with tape (20 pockets min.) STARTEND User Feed Direction Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) STARTEND Cathode Side Anode Side (denoted by + and circle) 160.0 A A B 2.5±.1 SECTION A-A SCALE 2 : 1 1.5±.1 8.0±.1 4.0±.1 1.75±.10 12.0 .0 +.3 DETAIL B SCALE 2 : 1 13mm Cover Tape Pocket Tape User Feed Direction User Feed Direction

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED tAPE AnD rEEL - ContInuED XP-L High Intensity XPLAWT-H0-xxxx-xxxxxxxxx High Intensity .30 [.012] T Ao 3.70 [.146] 1.20 [.047] Ko 3.0° 3.0° 3.70 [.146] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø 1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE ANODE SIDE CATHODE SIDE .30 [.012] T Ao 3.70 [.146] 1.20 [.047] Ko 3.0° 3.0° 3.70 [.146] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø 1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE ANODE SIDE CATHODE SIDE .30 [.012] T Ao 3.70 [.146] 1.20 [.047] Ko 3.0° 3.0° 3.70 [.146] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø 1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] E15.50 [.217]F 8.00 [.315] P POCKET SIZE ANODE SIDE CATHODE SIDE .30 [.012] T Ao 3.70 [.146] 1.20 [.047] Ko 3.0° 3.0° 3.70 [.146] Bo 10.25 [.404] 2.00 [.079] Po 4.00 [.157] Ø 1.50 [.059] MIN 12.00 [.472] NOMINAL 12.30 [.484] MAX W 1.75 [.069] 5.50 [.217]F 8.00 [.315] P POCKET SIZE ANODE SIDE CATHODE SIDE Anode Side Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) STARTEND Cathode Side Anode Side (denoted by + and circle) 160.0 A A B 2.5±.1 SECTION A-A SCALE 2 : 1 1.5±.1 8.0±.1 4.0±.1 1.75±.10 12.0 .0 +.3 DETAIL B SCALE 2 : 1 13mm Cover Tape Pocket Tape User Feed Direction User Feed Direction

Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® X p-L LED PACKAgIng Patent Label (on bottom of box) Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Code, Quantity, Reel ID Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Unpackaged Reel Packaged Reel Boxed Reel CREE Bin Code & Barcode Label Vacuum-Sealed Moisture Barrier Bag Label with Customer P/N, Qty, Lot #, PO # Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Patent Label Label with Customer Order Code, Qty, Reel ID, PO #