XPEBRO-L1-0000-00C01

XP-E2 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 39

Technical content

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ® and XLamp ® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.CRee. Com/XLAmp CLD-DS56 Rev 9A Cree® XLamp® XP-E2 LEDs ProDuCt DEsCriPtion The XLamp ® XP-e2 LeD builds on the unprecedented performance of the original XP-e by increasing lumen output up to 20% while providing a single die LeD point source for precise optical control. The XP-e2 LeD shares the same footprint as the original XP-e, providing a seamless upgrade path to more lumens and/or greater efficiency while shortening the design cycle for existing XP customers. XLamp XP-e2 LeDs are the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED retrofit lamps, outdoor, portable, indoor directional, emergency vehicle or architectural.

FEAturEs

• Available in white, outdoor white, 80-CRI, 85-CRI, 90-CRI white, royal blue, blue, green, PC amber, amber, red-orange & red
• ANSI-compatible chromaticity bins
• White binned at 85 °C
• Maximum drive current: 1 A
• Low thermal resistance: as low as 5 °C/W
• Wide viewing angle: 110°-135°
• Unlimited floor life at ≤ 30 °C/85% RH
• Reflow solderable - JEDEC J-STD-020C compatible
• electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component (E349212)

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.2 XLamp ® X p-E2 LED tAbLE oF ContEnts

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.3 XLamp ® X p-E2 LED ChArACtEristiCs Characteristics unit Minimum typical Maximum Thermal resistance, junction to solder point - white, royal blue, blue °C/W 9 Thermal resistance, junction to solder point - green °C/W 15 Thermal resistance, junction to solder point - PC amber °C/W 9 Thermal resistance, junction to solder point - amber °C/W 7 Thermal resistance, junction to solder point - red-orange, red °C/W 5 Viewing angle (FWHM) - white degrees 110 Viewing angle (FWHM) - royal blue, blue, green degrees 135 Viewing angle (FWHM) - PC amber degrees 110 Viewing angle (FWHM) - amber, red-orange, red degrees 130 Temperature coefficient of voltage - white mV/°C -2.3 Temperature coefficient of voltage - royal blue, blue mV/°C -3.3 Temperature coefficient of voltage - green mV/°C -3.8 Temperature coefficient of voltage - PC amber mV/°C -2.5 Temperature coefficient of voltage - amber, red-orange, red mV/°C -1.8 ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, green v 8000 ESD classification (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red Class 2 DC forward current mA 1000 Reverse voltage v 5 Forward voltage (@ 350 mA, 85 °C) - white v 2.9 3.25 Forward voltage (@ 700 mA, 85 °C) - white 3.05 Forward voltage (@ 1000 mA, 85 °C) - white 3.15 Forward voltage (@ 350 mA, 25 °C) - royal blue, blue v 3.1 3.5 Forward voltage (@ 1000 mA, 25 °C) - royal blue, blue v 3.4 Forward voltage (@ 350 mA, 25 °C) - green v 3.2 3.8 Forward voltage (@ 1000 mA, 25 °C) - green v 3.7 Forward voltage (@ 350 mA, 25 °C) - PC amber v 3.05 3.5 Forward voltage (@ 1000 mA, 25 °C) - PC amber v 3.28 Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red v 2.2 2.6 Forward voltage (@ 1000 mA, 25 °C) - amber, red-orange, red v 2.65 LeD junction temperature °C 150

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.4 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) The following tables provide order codes for XLamp XP-e2 white LeDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 33). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 32). Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 51 6200 K R4 130 151 223 284 XPeBWT-L1-0000-00G51 R3 122 142 209 266 XPeBWT-L1-0000-00F51 R2 114 132 195 249 XPeBWT-L1-0000-00e51 Q5 107 124 183 233 XPeBWT-L1-0000-00D51 Q4 100 116 171 218 XPeBWT-L1-0000-00C51 53 6000 K R4 130 151 223 284 XPEBWT-L1-0000-00G53 R3 122 142 209 266 XPEBWT-L1-0000-00F53 R2 114 132 195 249 XPEBWT-L1-0000-00E53 Q5 107 124 183 233 XPEBWT-L1-0000-00D53 Q4 100 116 171 218 XPEBWT-L1-0000-00C53 50 6200 K R4 130 151 223 284 XPeBWT-L1-0000-00G50 R3 122 142 209 266 XPeBWT-L1-0000-00F50 R2 114 132 195 249 XPeBWT-L1-0000-00e50 Q5 107 124 183 233 XPeBWT-L1-0000-00D50 Q4 100 116 171 218 XPeBWT-L1-0000-00C50 e1 6500 K R4 130 151 223 284 XPeBWT-L1-0000-00Ge1 R3 122 142 209 266 XPeBWT-L1-0000-00Fe1 R2 114 132 195 249 XPeBWT-L1-0000-00ee1 Q5 107 124 183 233 XPeBWT-L1-0000-00De1 Q4 100 116 171 218 XPeBWT-L1-0000-00Ce1 e2 5700 K R4 130 151 223 284 XPeBWT-L1-0000-00Ge2 R3 122 142 209 266 XPeBWT-L1-0000-00Fe2 R2 114 132 195 249 XPeBWT-L1-0000-00ee2 Q5 107 124 183 233 XPeBWT-L1-0000-00De2 Q4 100 116 171 218 XPeBWT-L1-0000-00Ce2

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.5 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 75 CRI Typical 80 CRI Minimum E3 5000 K R4 130 151 223 284 XPEBWT-01-0000-00GE3 R3 122 142 209 266 XPEBWT-01-0000-00FE3 XPEBWT-L1-0000-00FE3 R2 114 132 195 249 XPEBWT-01-0000-00EE3 XPEBWT-L1-0000-00EE3 Q5 107 124 183 233 XPEBWT-L1-0000-00DE3 Q4 100 116 171 218 XPEBWT-L1-0000-00CE3 F4 4750 K R4 130 151 223 284 XPEBWT-01-0000-00GF4 R3 122 142 209 266 XPEBWT-01-0000-00FF4 XPEBWT-L1-0000-00FF4 R2 114 132 195 249 XPEBWT-01-0000-00EF4 XPEBWT-L1-0000-00EF4 Q5 107 124 183 233 XPEBWT-L1-0000-00DF4 Q4 100 116 171 218 XPEBWT-L1-0000-00CF4 E4 4500 K R4 130 151 223 284 XPEBWT-01-0000-00GE4 R3 122 142 209 266 XPEBWT-01-0000-00FE4 XPEBWT-L1-0000-00FE4 R2 114 132 195 249 XPEBWT-01-0000-00EE4 XPEBWT-L1-0000-00EE4 Q5 107 124 183 233 XPEBWT-L1-0000-00DE4 Q4 100 116 171 218 XPEBWT-L1-0000-00CE4 F5 4250 K R3 122 142 209 266 XPeBWT-01-0000-00FF5 R2 114 132 195 249 XPeBWT-01-0000-00eF5 XPeBWT-L1-0000-00eF5 Q5 107 124 183 233 XPeBWT-01-0000-00DF5 XPeBWT-L1-0000-00DF5 Q4 100 116 171 218 XPeBWT-L1-0000-00CF5 Q3 93.9 109 161 205 XPeBWT-L1-0000-00BF5 e5 4000 K R3 122 142 209 266 XPeBWT-01-0000-00Fe5 R2 114 132 195 249 XPeBWT-01-0000-00ee5 XPeBWT-L1-0000-00ee5 XPEBWT-H1-0000-00EE5 Q5 107 124 183 233 XPeBWT-01-0000-00De5 XPeBWT-L1-0000-00De5 XPEBWT-H1-0000-00DE5 Q4 100 116 171 218 XPeBWT-L1-0000-00Ce5 XPEBWT-H1-0000-00CE5 Q3 93.9 109 161 205 XPeBWT-L1-0000-00Be5 XPEBWT-H1-0000-00BE5 Z5 4000 K Q5 107 124 183 233 XPeBWT-L1-0000-00DZ5 XPEBWT-H1-0000-00DZ5 Q4 100 116 171 218 XPeBWT-L1-0000-00CZ5 XPEBWT-H1-0000-00CZ5 Q3 93.9 109 161 205 XPeBWT-L1-0000-00BZ5 XPEBWT-H1-0000-00BZ5 FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.6 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C** order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum F6 3750 K R3 122 142 209 266 XPeBWT-01- 0000-00FF6 R2 114 132 195 249 XPeBWT-01- 0000-00eF6 XPeBWT-L1- 0000-00eF6 Q5 107 124 183 233 XPeBWT-01- 0000-00DF6 XPeBWT-L1- 0000-00DF6 XPEBWT-H1- 0000-00DF6 Q4 100 116 171 218 XPeBWT-L1- 0000-00CF6 XPEBWT-H1- 0000-00CF6 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BF6 XPEBWT-H1- 0000-00BF6 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AF6 XPEBWT-H1- 0000-00AF6 e6 3500 K R3 122 142 209 266 XPeBWT-01- 0000-00Fe6 R2 114 132 195 249 XPeBWT-01- 0000-00ee6 XPeBWT-L1- 0000-00ee6 Q5 107 124 183 233 XPeBWT-01- 0000-00De6 XPeBWT-L1- 0000-00De6 XPEBWT-H1- 0000-00De6 Q4 100 116 171 218 XPeBWT-L1- 0000-00Ce6 XPEBWT-H1- 0000-00Ce6 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00Be6 XPEBWT-H1- 0000-00Be6 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00Ae6 XPEBWT-H1- 0000-00Ae6 Z6 3500 K Q5 107 124 183 233 XPeBWT-L1- 0000-00DZ6 Q4 100 116 171 218 XPeBWT-L1- 0000-00CZ6 XPEBWT-H1- 0000-00CZ6 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BZ6 XPEBWT-H1- 0000-00BZ6 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AZ6 XPEBWT-H1- 0000-00AZ6 F7 3250 K R2 114 132 195 249 XPeBWT-01- 0000-00eF7 XPeBWT-L1- 0000-00eF7 Q5 107 124 183 233 XPeBWT-01- 0000-00DF7 XPeBWT-L1- 0000-00DF7 XPEBWT-H1- 0000-00DF7 Q4 100 116 171 218 XPeBWT-L1- 0000-00CF7 XPEBWT-H1- 0000-00CF7 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BF7 XPEBWT-H1- 0000-00BF7 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AF7 XPEBWT-H1- 0000-00AF7 FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.7 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C** order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum e7 3000 K R2 114 132 195 249 XPeBWT-01- 0000-00ee7 XPeBWT-L1- 0000-00ee7 Q5 107 124 183 233 XPeBWT-01- 0000-00De7 XPeBWT-L1- 0000-00De7 XPEBWT-H1- 0000-00De7 Q4 100 116 171 218 XPeBWT-L1- 0000-00Ce7 XPEBWT-H1- 0000-00Ce7 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00Be7 XPEBWT-H1- 0000-00Be7 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00Ae7 XPEBWT-H1- 0000-00Ae7 XPeBWT-P1- 0000-00Ae7 XPeBWT-U1-0000- 00Ae7 P4 80.6 93.6 138 176 XPeBWT-P1- 0000-009e7 XPeBWT-U1- 0000-009e7 P3 73.9 85.8 127 161 XPeBWT-P1- 0000-008e7 XPeBWT-U1- 0000-008e7 P2 67.2 78.0 115 147 XPeBWT-P1- 0000-007e7 XPeBWT-U1- 0000-007e7 Z7 3000 K Q5 107 124 183 233 XPeBWT-L1- 0000-00DZ7 Q4 100 116 171 218 XPeBWT-L1- 0000-00CZ7 XPEBWT-H1- 0000-00CZ7 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BZ7 XPEBWT-H1- 0000-00BZ7 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AZ7 XPEBWT-H1- 0000-00AZ7 XPeBWT-P1- 0000-00AZ7 P4 80.6 93.6 138 176 XPeBWT-P1- 0000-009Z7 XPeBWT-U1- 0000-009Z7 P3 73.9 85.8 127 161 XPeBWT-P1- 0000-008Z7 XPeBWT-U1- 0000-008Z7 P2 67.2 78.0 115 147 XPeBWT-P1- 0000-007Z7 XPeBWT-U1- 0000-007Z7 FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.8 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C** order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum F8 2850 K Q5 107 124 183 233 XPeBWT-L1- 0000-00DF8 Q4 100 116 171 218 XPeBWT-L1- 0000-00CF8 XPEBWT-H1- 0000-00CF8 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BF8 XPEBWT-H1- 0000-00BF8 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AF8 XPEBWT-H1- 0000-00AF8 XPeBWT-P1- 0000-00AF8 P4 80.6 93.6 138 176 XPeBWT-L1- 0000-009F8 XPEBWT-H1- 0000-009F8 XPeBWT-P1- 0000-009F8 XPeBWT-U1- 0000-009F8 P3 73.9 85.8 127 161 XPeBWT-P1- 0000-008F8 XPeBWT-U1- 0000-008F8 P2 67.2 78 115 147 XPeBWT-P1- 0000-007F8 XPeBWT-U1- 0000-007F8 N4 62 72 106 135 XPeBWT-P1- 0000-006F8 XPeBWT-U1- 0000-006F8 e8 2700 K Q5 107 124 183 233 XPeBWT-L1- 0000-00De8 Q4 100 116 171 218 XPeBWT-L1- 0000-00Ce8 XPEBWT-H1- 0000-00Ce8 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00Be8 XPEBWT-H1- 0000-00Be8 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00Ae8 XPEBWT-H1- 0000-00Ae8 P4 80.6 93.6 138 176 XPeBWT-L1- 0000-009e8 XPEBWT-H1- 0000-009e8 XPeBWT-P1- 0000-009e8 XPeBWT-U1- 0000-009e8 P3 73.9 85.8 127 161 XPeBWT-P1- 0000-008e8 XPeBWT-U1- 0000-008e8 P2 67.2 78 115 147 XPeBWT-P1- 0000-007e8 XPeBWT-U1- 0000-007e8 N4 62 72 106 135 XPeBWT-P1- 0000-006e8 XPeBWT-U1- 0000-006e8 FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.9 XLamp ® X p-E2 LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 700 mA and 1 A are for reference only. Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm) @ 85 °C** order Codes Kit CCt Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Z8 2700 K Q4 100 116 171 218 XPeBWT-L1- 0000-00CZ8 Q3 93.9 109 161 205 XPeBWT-L1- 0000-00BZ8 XPEBWT-H1- 0000-00BZ8 Q2 87.4 102 150 191 XPeBWT-L1- 0000-00AZ8 XPEBWT-H1- 0000-00AZ8 P4 80.6 93.6 138 176 XPeBWT-L1- 0000-009Z8 XPEBWT-H1- 0000-009Z8 XPeBWT-P1- 0000-009Z8 P3 73.9 85.8 127 161 XPeBWT-P1- 0000-008Z8 XPeBWT-U1- 0000-008Z8 P2 67.2 78 115 147 XPeBWT-P1- 0000-007Z8 XPeBWT-U1- 0000-007Z8 N4 62 72 106 135 XPeBWT-P1- 0000-006Z8 XPeBWT-U1- 0000-006Z8 eA 2200 K P3 73.9 85.8 127 161 XPeBWT-L1- 0000-008eA XPEBWT-H1- 0000-008eA P2 67.2 78 115 147 XPeBWT-L1- 0000-007eA XPEBWT-H1- 0000-007eA N4 62 72 106 135 XPeBWT-L1- 0000-006eA XPEBWT-H1- 0000-006eA ZA 2200 K P3 73.9 85.8 127 161 XPeBWT-L1- 0000-008ZA XPEBWT-H1- 0000-008ZA P2 67.2 78 115 147 XPeBWT-L1- 0000-007ZA XPEBWT-H1- 0000-007ZA N4 62 72 106 135 XPeBWT-L1- 0000-006ZA XPEBWT-H1- 0000-006ZA FLuX ChArACtEristiCs - WhitE (tJ = 85 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.10 XLamp ® X p-E2 LED Note:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. FLuX ChArACtEristiCs - Co Lor (tJ = 25 °C) The following tables provide order codes for XLamp XP-e2 color LeDs. For a complete description of the order-code nomenclature, please see the Bin and Order Code Formats section (page 33). Color Minimum radiant Flux @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (mW) Group DWL (nm) Group DWL (nm) Royal Blue 30 450 D3 450 D5 465 XPEBRY-L1-0000-00J01 D3 450 D4 460 XPEBRY-L1-0000-00J02 D4 455 D5 465 XPEBRY-L1-0000-00J03 31 475 D3 450 D5 465 XPeBRY-L1-0000-00K01 D3 450 D4 460 XPeBRY-L1-0000-00K02 D4 455 D5 465 XPEBRY-L1-0000-00K03 32 500 D3 450 D5 465 XPeBRY-L1-0000-00L01 D3 450 D4 460 XPeBRY-L1-0000-00L02 D4 455 D5 465 XPEBRY-L1-0000-00L03 33 525 D3 450 D5 465 XPeBRY-L1-0000-00M01 D3 450 D4 460 XPeBRY-L1-0000-00M02 D4 455 D5 465 XPEBRY-L1-0000-00M03 34 550 D3 450 D5 465 XPeBRY-L1-0000-00N01 D3 450 D4 460 XPeBRY-L1-0000-00N02 D4 455 D5 465 XPEBRY-L1-0000-00N03 35 575 D3 450 D5 465 XPeBRY-L1-0000-00P01 D3 450 D4 460 XPeBRY-L1-0000-00P02 D4 455 D5 465 XPEBRY-L1-0000-00P03 36 600 D3 450 D5 465 XPeBRY-L1-0000-00Q01 D3 450 D4 460 XPeBRY-L1-0000-00Q02 D4 455 D5 465 XPEBRY-L1-0000-00Q03 37 625 D3 450 D5 465 XPeBRY-L1-0000-00R01 D3 450 D4 460 XPeBRY-L1-0000-00R02 38 650 D3 450 D5 465 XPeBRY-L1-0000-00S01 D3 450 D4 460 XPeBRY-L1-0000-00S02

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.11 XLamp ® X p-E2 LED Note:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Color Minimum Luminous Flux (lm) @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (lm) Group DWL (nm) Group DWL (nm) Blue K2 30.6 B3 465 B6 485 XPeBBL-L1-0000-00Y01 B3 465 B5 480 XPeBBL-L1-0000-00Y02 B4 470 B5 480 XPeBBL-L1-0000-00Y05 K3 35.2 B3 465 B6 485 XPeBBL-L1-0000-00Z01 B3 465 B5 480 XPeBBL-L1-0000-00Z02 B4 470 B5 480 XPeBBL-L1-0000-00Z05 M2 39.8 B3 465 B6 485 XPeBBL-L1-0000-00201 B3 465 B5 480 XPeBBL-L1-0000-00202 B4 470 B5 480 XPeBBL-L1-0000-00205 M3 45.7 B3 465 B6 485 XPEBBL-L1-0000-00301 B3 465 B5 480 XPEBBL-L1-0000-00302 B4 470 B5 480 XPEBBL-L1-0000-00305 Color Minimum Luminous Flux (lm) @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (lm) Group DWL (nm) Group DWL (nm) Green Q2 87.4 G2 520 G4 535 XPeBGR-L1-0000-00A01 G2 520 G3 530 XPeBGR-L1-0000-00A02 G3 525 G4 535 XPEBGR-L1-0000-00A03 Q3 93.9 G2 520 G4 535 XPeBGR-L1-0000-00B01 G2 520 G3 530 XPeBGR-L1-0000-00B02 G3 525 G4 535 XPEBGR-L1-0000-00B03 Q4 100 G2 520 G4 535 XPeBGR-L1-0000-00C01 G2 520 G3 530 XPeBGR-L1-0000-00C02 G3 525 G4 535 XPEBGR-L1-0000-00C03 Q5 107 G2 520 G4 535 XPeBGR-L1-0000-00D01 G2 520 G3 530 XPeBGR-L1-0000-00D02 G3 525 G4 535 XPEBGR-L1-0000-00D03 R2 114 G2 520 G4 535 XPeBGR-L1-0000-00e01 G2 520 G3 530 XPeBGR-L1-0000-00e02 G3 525 G4 535 XPEBGR-L1-0000-00E03 R3 122 G2 520 G4 535 XPeBGR-L1-0000-00F01 G2 520 G3 530 XPeBGR-L1-0000-00F02 G3 525 G4 535 XPEBGR-L1-0000-00F03 FLuX ChArACtEristiCs - Co Lor (tJ = 25 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.12 XLamp ® X p-E2 LED Note:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Color Color bin Minimum Luminous Flux (lm) @ 350 mA order Codes Group Flux (lm) PC Amber Y2 Q2 87.4 XPeBPA-L1-0000-00A01 Q3 93.9 XPeBPA-L1-0000-00B01 Q4 100 XPeBPA-L1-0000-00C01 Q5 107 XPeBPA-L1-0000-00D01 Color Minimum Luminous Flux (lm) @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (lm) Group DWL (nm) Group DWL (nm) Amber N4 62.0 A2 585 A3 595 XPeBAM-L1-0000-00601 A2 585 A2 590 XPeBAM-L1-0000-00602 A3 590 A3 595 XPEBAM-L1-0000-00603 P2 67.2 A2 585 A3 595 XPeBAM-L1-0000-00701 A2 585 A2 590 XPeBAM-L1-0000-00702 A3 590 A3 595 XPEBAM-L1-0000-00703 P3 73.9 A2 585 A3 595 XPeBAM-L1-0000-00801 A2 585 A2 590 XPeBAM-L1-0000-00802 A3 590 A3 595 XPEBAM-L1-0000-00803 P4 80.6 A2 585 A3 595 XPeBAM-L1-0000-00901 A3 590 A3 595 XPEBAM-L1-0000-00903 FLuX ChArACtEristiCs - Co Lor (tJ = 25 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.13 XLamp ® X p-E2 LED Note:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 35).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Color Minimum Luminous Flux (lm) @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (lm) Group DWL (nm) Group DWL (nm) Red- Orange P2 67.2 O3 610 O4 620 XPeBRO-L1-0000-00701 O3 610 O3 615 XPeBRO-L1-0000-00702 O4 615 O4 620 XPEBRO-L1-0000-00703 P3 73.9 O3 610 O4 620 XPeBRO-L1-0000-00801 O3 610 O3 615 XPeBRO-L1-0000-00802 O4 615 O4 620 XPEBRO-L1-0000-00803 P4 80.6 O3 610 O4 620 XPeBRO-L1-0000-00901 O3 610 O3 615 XPeBRO-L1-0000-00902 O4 615 O4 620 XPEBRO-L1-0000-00903 Q2 87.4 O3 610 O4 620 XPeBRO-L1-0000-00A01 O3 610 O3 615 XPeBRO-L1-0000-00A02 O4 615 O4 620 XPEBRO-L1-0000-00A03 Q3 93.9 O3 610 O4 620 XPeBRO-L1-0000-00B01 O3 610 O3 615 XPeBRO-L1-0000-00B02 Q4 100 O3 610 O4 620 XPeBRO-L1-0000-00C01 O3 610 O3 615 XPeBRO-L1-0000-00C02 Q5 107 O3 610 O4 620 XPeBRO-L1-0000-00D01 O3 610 O3 615 XPeBRO-L1-0000-00D02 Color Minimum Luminous Flux (lm) @ 350 mA dominant Wavelength (nm) order CodesMinimum Maximum Group Flux (lm) Group DWL (nm) Group DWL (nm) Red N3 56.8 R2 620 R3 630 XPeBRD-L1-0000-00501 R2 620 R2 625 XPeBRD-L1-0000-00502 N4 62 R2 620 R3 630 XPeBRD-L1-0000-00601 R2 620 R2 625 XPeBRD-L1-0000-00602 P2 67.2 R2 620 R3 630 XPeBRD-L1-0000-00701 R2 620 R2 625 XPeBRD-L1-0000-00702 P3 73.9 R2 620 R3 630 XPeBRD-L1-0000-00801 R2 620 R2 625 XPeBRD-L1-0000-00802 P4 80.6 R2 620 R3 630 XPeBRD-L1-0000-00901 R2 620 R2 625 XPeBRD-L1-0000-00902 FLuX ChArACtEristiCs - Co Lor (tJ = 25 °C) - Con TInued

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.14 XLamp ® X p-E2 LED rELAtivE sPEC trAL PoWEr DistributionRelative Spectral Power 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm) Cool White Warm White Relative Spectral Power 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm) Royal Blue Blue Green PC Amber Amber Red-Orange Red

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.15 XLamp ® X p-E2 LED rELAtivE FLuX vs. JunC tion tEMPErA turE (iF = 350 mA) Relative Flux Output vs. Junction Temperature 100 120 25 50 75 100 125 150 Relative Luminous Flux (%) Junction Temperature (ºC) White Relative Flux Output vs. Junction Temperature 100 25 50 75 100 125 150 Relative Radiant Flux (%) Junction Temperature (ºC) Royal Blue Relative Flux Output vs. Junction Temperature 100 25 50 75 100 125 150 Relative Luminous Flux (%) Junction Temperature (ºC) Blue Green PC Amber Amber Red-Orange, Red

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.16 XLamp ® X p-E2 LED ELEC triCAL ChArACtEristiCs - WhitE (tJ = 85 °C) ELEC triCAL ChArACtEristiCs - Co Lor (tJ = 25 °C) Electrical Characteristics (Tj = 25ºC) 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (V) White Electrical Characteristics (Tj = 85ºC) 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (V) Royal Blue, Blue Green PC Amber Amber, Red-Orange, Red

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.17 XLamp ® X p-E2 LED rELAtivE FLuX vs. CurrEnt - WhitE (tJ = 85 °C) rELAtivE FLuX vs. CurrEnt - CoL or (tJ = 25 °C) Relative Intensity vs. Current (Tj = 85ºC) 100 150 200 250 0 100 200 300 400 500 600 700 800 900 1000 Relative Luminous Flux (%) Forward Current (mA) White Relative Intensity vs. Current (Tj = 25ºC) 100 150 200 250 0 100 200 300 400 500 600 700 800 900 1000 Relative Radiant Flux (%) Forward Current (mA) Royal Blue Relative Intensity vs. Current (Tj = 25ºC) 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 Relative Luminous Flux (%) Forward Current (mA) Blue Green PC Amber Amber Red-Orange, Red

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.18 XLamp ® X p-E2 LED ReLATIve ChRo MATICIT y vs. CuRRen T And TeMpeRATuRe - W ARM WhITe* * Warm White XLamp XP-e2 LeDs have a typical CRI of 80. Relative Chromaticity Vs. Current, WW -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 100 200 300 400 500 600 700 800 900 1000 Current (mA) ΔCCx ΔCCy T J = 85 °C Relative Chromaticity Vs. Temperature WW -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy I F = 350 mA

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.19 XLamp ® X p-E2 LED tyPiCAL sPAtiAL Distribution Typical Spatial Radiation Pattern 100 -90 -70 -50 -30 -10 10 30 50 70 90 Relative Luminous Intensity (%) Angle (°) White Typical Spatial Radiation Pattern 100 -90 -70 -50 -30 -10 10 30 50 70 90 Relative Luminous Intensity (%) Angle (º) Royal Blue, Blue, Green PC Amber Amber, Red-Orange, Red

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.20 XLamp ® X p-E2 LED thErMAL DEsiGn The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. White royal blue, blue Green PC Amber Amber red-orange, red 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Thermal Design - royal blue - same as blue 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Thermal Design - PC amber 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Thermal Design - green 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 30°C/W Rj-a = 35°C/W Thermal Design - red-orange, red 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W Thermal Design - amber 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 20°C/W Rj-a = 25°C/W

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.21 XLamp ® X p-E2 LED PErForMAnCE GrouPs - LuMinous FL uX XLamp XP-E2 LEDs (except royal blue) are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Minimum Luminous Flux (lm) @ 350 mA Maximum Luminous Flux (lm) @ 350 mA K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62.0 N4 62.0 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 PErForMAnCE GrouPs - rADi Ant FLuX (tJ = 25 °C) XLamp XP-E2 royal blue LEDs are tested for radiant flux and placed into one the following bins: Group Minimum radiant Flux (mW) @ 350 mA Maximum radiant Flux (mW) @ 350 mA 30 (J) 450 475 31 (K) 475 500 32 (L) 500 525 33 (M) 525 550 34 (N) 550 575 35 (P) 575 600 36 (Q) 600 625 37 (R) 625 650 38 (S) 650 675 39 (T) 675 700

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.22 XLamp ® X p-E2 LED PErForMAnCE GrouPs - ChroMA tiCity White XLamp XP-E2 LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. region x y region x y region x y region x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.2984 0.3133 0.2980 0.2880 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3366 0.3369 0.3381 0.3762 0.3440 0.3428 0.3480 0.3840 0.3429 0.3307 0.3463 0.3687 0.3361 0.3245 0.3376 0.3616 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.23 XLamp ® X p-E2 LED region x y region x y region x y region x y 5A1 0.3670 0.3578 5A2 0.3686 0.3649 5A3 0.3744 0.3685 5A4 0.3726 0.3612 5B1 0.3702 0.3722 5B2 0.3719 0.3797 5B3 0.3782 0.3837 5B4 0.3763 0.3760 5C1 0.3825 0.3798 5C2 0.3847 0.3877 5C3 0.3912 0.3917 5C4 0.3887 0.3836 5D1 0.3783 0.3646 5D2 0.3804 0.3721 5D3 0.3863 0.3758 5D4 0.3840 0.3681 6A1 0.3889 0.3690 6A2 0.3915 0.3768 6A3 0.3981 0.3800 6A4 0.3953 0.3720 6B1 0.3941 0.3848 6B2 0.3968 0.3930 6B3 0.4040 0.3966 6B4 0.4010 0.3882 6C1 0.4080 0.3916 6C2 0.4113 0.4001 6C3 0.4186 0.4037 6C4 0.4150 0.3950 6D1 0.4017 0.3751 6D2 0.4048 0.3832 6D3 0.4116 0.3865 6D4 0.4082 0.3782 7A1 0.4147 0.3814 7A2 0.4183 0.3898 7A3 0.4242 0.3919 7A4 0.4203 0.3833 7B1 0.4221 0.3984 7B2 0.4259 0.4073 7B3 0.4322 0.4096 7B4 0.4281 0.4006 peRFo RMAnCe GRoups - ChRoMATICIT y (ConTInued)

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.24 XLamp ® X p-E2 LED region x y region x y region x y region x y 7C1 0.4342 0.4028 7C2 0.4385 0.4119 7C3 0.4449 0.4141 7C4 0.4403 0.4049 7D1 0.4259 0.3853 7D2 0.4300 0.3939 7D3 0.4359 0.3960 7D4 0.4316 0.3873 8A1 0.4373 0.3893 8A2 0.4418 0.3981 8A3 0.4475 0.3994 8A4 0.4428 0.3906 8B1 0.4465 0.4071 8B2 0.4513 0.4164 8B3 0.4573 0.4178 8B4 0.4523 0.4085 8C1 0.4582 0.4099 8C2 0.4634 0.4193 8C3 0.4695 0.4207 8C4 0.4641 0.4112 8D1 0.4483 0.3919 8D2 0.4532 0.4008 8D3 0.4589 0.4021 8D4 0.4538 0.3931 AA1 0.4822 0.3973 AA2 0.4884 0.4067 AA3 0.4942 0.4066 AA4 0.4879 0.3972 AB1 0.4946 0.4162 AB2 0.5008 0.4256 AB3 0.5069 0.4254 AB4 0.5006 0.4160 AC1 0.5066 0.4158 AC2 0.5131 0.4252 AC3 0.5192 0.4250 AC4 0.5126 0.4156 AD1 0.4936 0.3970 AD2 0.5001 0.4064 AD3 0.5059 0.4062 AD4 0.4993 0.3969 peRFo RMAnCe GRoups - ChRoMATICIT y (ConTInued)

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.25 XLamp ® X p-E2 LED peRFo RMAnCe GRoups - ChRoMATICIT y (ConTInued) XLamp XP-E2 PC amber LEDs are placed into the region defined by the following bounding coordinates. region x y 0.5469 0.4249 0.5700 0.4100 0.5900 0.4100 0.5610 0.4390 PErForMAnCE GrouPs - Do MinAnt WAvELEnGth Color XLamp XP-E2 LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color DWL Group Minimum dWL (nm) @ 350 mA Maximum dWL (nm) @ 350 mA Royal Blue D3 450 455 D4 455 460 D5 460 465 Blue B3 465 470 B4 470 475 B5 475 480 B6 480 485 Green G2 520 525 G3 525 530 G4 530 535 Amber A2 585 590 A3 590 595 Red-Orange O3 610 615 O4 615 620 Red R2 620 625 R3 625 630

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.26 XLamp ® X p-E2 LED PErForMAnCE GrouPs - ForWArD voLtAGE Amber, red-orange and, red XLamp XP-E2 LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward voltage Group Minimum Forward voltage (v) @ 350 mA Maximum Forward voltage (v) @ 350 mA B 1.75 2.0 C 2.0 2.25 D 2.25 2.5 e 2.5 2.75 F 2.75 3.0 G 3.0 3.25 H 3.25 3.5 J 3.5 3.75

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.27 XLamp ® X p-E2 LED CrEE’s stAnDArD Chro MAtiCity rEGions PL ottED on thE 1931 CiE CurvE ANSI Cool White ANSI Neutral White and ANSI Warm White 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.28 XLamp ® X p-E2 LED CrEE’s stAnDArD CooL WhitE Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.29 XLamp ® X p-E2 LED CrEE’s stAnDArD WArM AnD nEutrAL WhitE Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A E8E7 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.30 XLamp ® X p-E2 LED CrEE’s stAnDArD WArM AnD nEutrAL WhitE Kits PL ottED on Ansi stAnDArD Chro MAtiCity rEGions - ContinuED CrEE’s PC AMbEr Kit PL ottED on thE 1931 CiE CurvE 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.53 0.54 0.55 0.56 0.57 0.58 0.59 0.60 0.61 CCy CCx

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.31 XLamp ® X p-E2 LED CRee’s 2200 K CCT WhITe KIT s pLoTTed on AnsI sTAndARd ChRo MATICIT y ReGIons 2700 K 3000 K 2450 K 2200 K 7C2 7C3 7C4 7D3 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 AB2 AB1 AA2 AA1 AB3 AB4 AA3 AA4 AC2 AC1 AD2 AD1 AC3 AC4 AD3 AD4 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52 0.53 0.54 0.55 CCy CCx EA 2700 K 3000 K 2450 K 2200 K 7C2 7C3 7C4 7D3 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 AB2 AB1 AA2 AA1 AB3 AB4 AA3 AA4 AC2 AC1 AD2 AD1 AC3 AC4 AD3 AD4 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52 0.53 0.54 0.55 CCy CCx ZA

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.32 XLamp ® X p-E2 LED CrEE’s stAnDArD Chro MAtiCity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color CCt Kit Chromaticity bins Cool White 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S

6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S

6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D

6500 K e1 1A, 1B, 1C, 1D

5700 K e2 2A, 2B, 2C, 2D

5000 K E3 3A, 3B, 3C, 3D

4750 K F4 3C, 3D, 4A, 4B

4500 K E4 4A, 4B, 4C, 4D

4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4

4000 K e5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4

4000 K Z5 5A3, 5B4, 5C1, 5D2

3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4

3500 K e6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4

3500 K Z6 6A3, 6B4, 6C1, 6D2

3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4

3000 K e7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4

3000 K Z7 7A3, 7B4, 7C1, 7D2

2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4

2700 K e8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4

2700 K Z8 8A3, 8B4, 8C1, 8D2

2200 K eA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4

2200 K ZA AA3, AB4, AC1, AD2

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.33 XLamp ® X p-E2 LED bin AnD orDEr CoDE ForMA ts XP-C bin codes and order codes are configured in the following manner: order Code bin Code SSSCCC-BD-HHHH-NNNNN Internal code Color BWT = Gen 2 White BRY = Gen 2 Royal Blue BBL = Gen 2 Blue BGR = Gen 2 Green BPA = Gen 2 PC Amber BAM = Gen 2 Amber BRO = Gen 2 Red-Orange BRD = Gen 2 Red Series XPE = XP-E Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Kit Number SSSCCC-BD-WWW-FF-G-AA Series XPE = XP-E Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Luminous or radiant flux group Internal code Voltage performance group (amber, red-orange, red) Chromaticity bin or dominant-wavelength group Color BWT = Gen 2 White BRY = Gen 2 Royal Blue BBL = Gen 2 Blue BGR = Gen 2 Green BPA = Gen 2 PC Amber BAM = Gen 2 Amb er BRO = Gen 2 Red-Orange BRD = Gen 2 Red order code & bin code headings & formats are in a table

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.34 XLamp ® X p-E2 LED rEFLoW soLDErinG ChArACtEristiCs In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. IPC/JEDEC J-STD-020C TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.35 XLamp ® X p-E2 LED notEs Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. pre-Release Qualification Testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. Moisture sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-E2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP . rohs Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. rEACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.36 XLamp ® X p-E2 LED uL® recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. vision Advisory WARNING: Do not look at exposed lamp in operation. eye injury can result. For more information about LeDs and eye safety, please refer to the LeD eye Safety application note. notEs - ContinuED

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.37 XLamp ® X p-E2 LED MECh AniCAL DiMEnsions Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm unless otherwise indicated. side viewtop view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE bottom view Alternate bottom view AnodeAnode SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE recommended PCb solder Pad recommended stencil Pattern (hatched Area is open) SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300Fax (919) 313-5558 4600 Silicon DriveDurham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 3.45 3.45 R1.53 .73 3.30 .50 2.30 3.30 1.30 2.26 .50 .58 3.30 .50 2.30 .64 1.01 .75 .25 3.30 .50 .50 3.30 3.30 1.30 3.30 REF. 3.30 REF. 1/122.000 C2610-00029 OUTLINE DRAWING XPE G2 07/19/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED PRIMARY ALTERNATIVE OPTICAL REFERENCE OPTICAL REFERENCE

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.38 XLamp ® X p-E2 LED tAPE AnD rEEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) STARTEND Cathode Side Anode Side (denoted by + and circle) 160.0 A A B 2.5±.1 SECTION A-A SCALE 2 : 1 1.5±.1 8.0±.1 4.0±.1 1.75±.10 12.0 .0 +.3 DETAIL B SCALE 2 : 1 13mm Cover Tape Pocket Tape User Feed Direction User Feed Direction Ø13 Ø61 ± 0.5 12.40 0 +2.00 MEASURED AT HUB 12.40 MEASURED AT INSIDE EDGE 16.40 SHEET 1 OF 11:2 2400-00005 SIZE TITLE REV. C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION .X ± 0.3 X° ± 2° .XX ± .10 .X ± .25 FOR SHEET METAL PARTS ONLY .XX ± .13 X° ± 1° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 361-4770 Durham, N.C 27703 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. Reel, 7" x 12mm Wide B LIUDEZHI 2012/5/25 PS Ø190 ½öÓÃÓÚÆÀ¹À¡£ °æȨËùÓÐ (c) by Foxit Software Company, 2004 ÓÉ Foxit PDF Editor ±à¼- OD 7.5'' Ø13 Ø61 ± 0.5 12.40 0 +2.00 MEASURED AT HUB 12.40 MEASURED AT INSIDE EDGE 16.40 SHEET 1 OF 11:2 2400-00005 SIZE TITLE REV. C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION .X ± 0.3 X° ± 2° .XX ± .10 .X ± .25 FOR SHEET METAL PARTS ONLY .XX ± .13 X° ± 1° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 361-4770 Durham, N.C 27703 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. Reel, 7" x 12mm Wide B LIUDEZHI 2012/5/25 PS Ø190 ½öÓÃÓÚÆÀ¹À¡£ °æȨËùÓÐ (c) by Foxit Software Company, 2004 ÓÉ Foxit PDF Editor ±à¼- OD 7.5'' Y Y X X REF 0.59 W F(III) P1D1 1.5 MIN. Bo Ao R0.2 TYPICAL REF 4.375 Ko Other material available.(IV) (III) (II) (I) hole to centerline of pocket. Measured from centerline of sprocket holes is ± 0.20. Cumulative tolerance of 10 sprocket to centerline of pocket. Measured from centerline of sprocket hole SECTION Y-Y SECTION X-X 2.0 ±0.05 (I) 1.55 ±0.05Do 4.0 ±0.1 (II) Po 1.75 ±0.1 0.30 ±0.05T REF R 2.24 2.40Ko +0.0/-0.1 3.70 W F P +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 Ao 3.70 +/- 0.1 Bo +/- 0.1 Y Y X X REF 0.59 W F(III) P1D1 1.5 MIN. Bo Ao R0.2 TYPICAL REF 4.375 Ko Other material available.(IV) (III) (II) (I) hole to centerline of pocket. Measured from centerline of sprocket holes is ± 0.20. Cumulative tolerance of 10 sprocket to centerline of pocket. Measured from centerline of sprocket hole SECTION Y-Y SECTION X-X 2.0 ±0.05 (I) 1.55 ±0.05Do 4.0 ±0.1 (II) Po 1.75 ±0.1 0.30 ±0.05T REF R 2.24 2.40Ko +0.0/-0.1 3.70 W F P +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 Ao 3.70 +/- 0.1 Bo +/- 0.1 Y Y X X REF 0.59 W F(III) P1D1 1.5 MIN. Bo Ao R0.2 TYPICAL REF 4.375 Ko Other material available.(IV) (III) (II) (I) hole to centerline of pocket. Measured from centerline of sprocket holes is ± 0.20. Cumulative tolerance of 10 sprocket to centerline of pocket. Measured from centerline of sprocket hole SECTION Y-Y SECTION X-X 2.0 ±0.05 (I) 1.55 ±0.05Do 4.0 ±0.1 (II) Po 1.75 ±0.1 0.30 ±0.05T REF R 2.24 2.40Ko +0.0/-0.1 3.70 W F P +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 Ao 3.70 +/- 0.1 Bo +/- 0.1 CATHODE SIDE ANODe SIDe

Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.39 XLamp ® X p-E2 LED PACKAGinG Patent Label (on bottom of box) Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Code, Quantity, Reel ID Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Unpackaged Reel Packaged Reel Boxed Reel CREE Bin Code & Barcode Label Vacuum-Sealed Moisture Barrier Bag Label with Customer P/N, Qty, Lot #, PO # Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Patent Label Label with Customer Order Code, Qty, Reel ID, PO #