XFM-5050-ES LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Features

  • High power UVC LED: >130 mW output power at 275 nm
  • Compact, cost effective 5050 package
  • Designed to maximize irradiance in high flow applications
  • Wide viewing angle >150 °
  • Standard SMT process Table of Contents Angular distribution and Typical

Product Family Chip Area Color Package Configuration Bin Kit XFM: UVC Surface Mount Package 5050: 5.0 mm x 5.0 mm UV: Ultraviolet F150H: 6-chip, 150 deg viewing angle, Gen2 Flux and Wavelength bin kit code - See ordering information XFM 5050 UV F150H <FFWWW-##> Note: 1. Flux Bin listed is minimum bin shipped, higher bins may be included at Luminus’ discretion. Wavelength Range (nm) Wavelength Bins Radiometric Flux Ordering Part Number Bin Kit Flux Code Min. Flux (mW) 270 - 280 270, 275 DE 100 XFM-5050-ES-UV-F150H-DE270-00 FA 120 XFM-5050-ES-UV-F150H-FA270-00 Ordering Part Numbers1

Ordering Information

2PDS-003228 Rev 01 www.luminus.com

XFM-5050-ES-UV LEDs are tested for radiometric flux and wavelength at a drive current of 300 mA, 20 ms single pulse at 25°C and placed into one of the following radiometric flux (FF), wavelength (WWW) bins and forward voltage bins. The LEDs can also be driven at other drive currents, to achieve the correlated flux values listed in the table. Color Flux Bin3 Binning @ 300 mA, Tc= 25°C4,5 Correlated Minimum Flux (mW), Tc= 25°C Min. Flux (mW) Max. Flux (mW) 450 mA 600 mA UV DE 100 120 139 175 FA 120 140 167 210 FB 140 160 195 245 FC 160 180 223 280 Radiometric Flux Bins1,2 Color Wavelength Bin3,6 Binning @ 300 mA, Tc= 25°C4,5 Minimum Wavelength (nm) Maximum Wavelength (nm) UV 270 270 275 275 275 280 Forward Voltage Bins Color Voltage Bin Binning @ 300 mA, Tc= 25°C4,5 Minimum Voltage (V) Maximum Voltage (V) UV V41 10.0 11.0 V42 11.0 12.0 V43 12.0 13.0 Note: 1. Luminus maintains a +/- 6% tolerance on flux measurements. 2. Products are production tested then sorted and packed by bin. 3. Individual bins are not orderable. Please refer to the Product Ordering information page for a list of orderable bin kits. 4. Product test condition: 300 mA, 20 ms pulse at 25 ºC. 5. Tc= Case temperature. 6. The wavelength bin as marked on the product label may be followed by a letter which is for internal use only. Wavelength Bins2 XFM-5050-ES Product Datasheet 3PDS-003228 Rev 01 www.luminus.com

Parameter Symbol Value Unit Forward Current If max 600 mA Storage Temperature Ts min -40 Ts max 100 Junction Temperature Tj max 100 °C ESD sensitivity ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 8000 V XFM-5050-ES Product Datasheet Note: 1. XFM-5050-ES-UV LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. 4PDS-003228 Rev 01 www.luminus.com

Device Performance1,2 Optical and Electrical Characteristics Symbol Value Unit Test Current If 300 mA Forward Voltage Vf min 10.0 VVf typ 11.64 Vf max 13.0 FWHM ∆λ 11 nm Viewing Angle 2θ1/2 150 ° Thermal Characteristics Thermal Resistance (junction to case)3 RѲj-c 4.2 °C/W XFM-5050-ES Product Datasheet Note: 1. Ratings are based on operation at a constant temperature of Tc = 25°C. Test conditions: 300 mA, 20 ms pulse at 25°C. 2. XFM-5050-ES-UV LEDs are short wavelength, deep UV LEDs. During operation, the LED emits high intensity UVC radiation, which is harmful to skin and eyes. UV light is also hazardous to skin and may cause cancer. Avoid exposure to deep UV light when LED is operational. 3. Measurements are in accordance with JEDEC 51-14. For more about thermal resistance calculation, please see https://luminusdevices.zendesk.com/hc/en-us/ articles/4416807960717-Thermal-Heatsink-Required-Rth-Calculator 5PDS-003228 Rev 01 www.luminus.com

Forward current: φv/φv(300 mA), 20 ms pulse, Tc= 25°C Temperature: φv/φv(25°C), 20 ms pulse, If = 300 mA Forward Voltage Shift Forward current: ∆Vf = V(If)- V(300 mA), 20 ms pulse, Tc = 25°C Temperature: ∆Vf = V(Tc) - V(25°C), 20 ms pulse, If = 300 mA Peak Wavelength Shift Forward current: ∆λd= λd(If) - λd(300 mA), 20 ms pulse, Tc = 25°C Temperature: ∆λd= λd(Tc) - λd(25°C), 20 ms pulse, If = 300 mA 6PDS-003228 Rev 01 www.luminus.com

Angular distribution and Typical Spectrum Typical Spectrum 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 240 250 260 270 280 290 300 310 320 Relative Intensity Wavelength (nm) Iref = f(Φ); Tc = 25°C Φref = f(λ); If = 300mA; Tc = 25°C 7PDS-003228 Rev 01 www.luminus.com

SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C XFM-5050-ES Product Datasheet Note: 1. Product complies to Moisture Sensitivity Level TBA. 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, ensure the pick-up tool does not touch any die components. 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max PDS-003228 Rev 01 www.luminus.com

9PDS-003228 Rev 01 www.luminus.com Recommended Solder Pad

10PDS-003228 Rev 01 www.luminus.com 4.00±0.1 5.50±0.1 12.00 1.75±0.1 8.00±0.1 2.00±0.1 A A BB SECTION A-A SECTION B-B 0.25±0.05 1.20±0.1 5.45±0.1 5.45±0.1 Cathode mark Polarity All XFM-5050 products are packaged and labeled with their respective bin as outlined in the tables on page 3. Each reel will only contain one flux and one wavelength bin.

Label Fields:

  • CPN: Luminus ordering part number
  • CID: Customer’s part number
  • QTY: Quantity of devices in pack
  • Flux: Bin as defined on page 3
  • Wavelength: Bin as defined in page 3
  • Voltage: Bin as defined on page 3
  • Color: Bin as defined on page 3
  • CRI: NA Packing Configuration:
  • Maximum of 250 devices per reel, minimum of 50 devices per reel
  • Partial reel may be shipped
  • Each reel is enclosed in anti-static bag
  • Shipping label is placed on top of anti-static bag XXX-XX-XXXX-XXXX-XXXXXXXXX 250 Box ID 11PDS-003228 Rev 01 www.luminus.com

This product is sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Eye Safety According to the test specification risk group IEC 62471: 2008-Non-GLS under 600 mA, this product complies to Risk group 3 (RG3) High risk, exceed the limits for Risk Group 2. Warning: This product emits invisible light - there is no aversion response. Avoid eye and skin exposure to un-shielded product. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/10532958752397 12PDS-003228 Rev 01 www.luminus.com

Revision History

Rev Date Description of Change A 08/19/2022 Initial release B 09/08/2022 Update product photo, characteristic curves, typical spectrum, angular distribution and editorial changes. 01 06/26/2023 Rev 01- Initial release XFM-5050-ES Product Datasheet 13PDS-003228 Rev 01 www.luminus.com