XF1000-DB

XF1000-DB MIMIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

High Linearity, 47 dBm OIP3 High Gain, 10 dB Gain @ 4.9 GHz 34 dBm P1dB Low Thermal Resistance Surface Mount 3x6mm DFN Device Voltage (Vdd) Current (Idd) Power Dissipation (PDC) RF Input Power (RFin) Junction Temperature Thermal Resistance Storage Temperature (Tstg) Operating Temperature ESD (HBM) Moisture Sensitivity Level (MSL) +9.0 V 750 mA 6.0W +25 dBm 175 ºC 18 ºC/W -55 ºC to +150 ºC -40 ºC to +85 ºC Class 1A MSL 3 Absolute Maximum Ratings Operation of this device beyond any of these parameters may cause permanent damage. Parameter Condition Min Typ MaxUnits Frequency Range (F) DC 5000MHz Test Frequency 12.5 2000MHz Small Signal Gain (S21) Externally matched Pout/Tone=22 dBm, Spacing=5 MHz 14.5dB Output Intercept Point (OIP3) +44.0 +33.0 +46.5dBm Output P1dB +34.0dBm Quiescent Current (Icq) 600.0mA 700.0 Noise Figure (NF) 5dB Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture. Electrical Characteristics (T=25ºC, Vdd=8V) Frequency (F) 3600 4900 MHz Gain (S21) 10.5 10.0 dB Ourput IP3 (OIP3) 47.0 46.0 dBm Output P1dB 34.0 33.7 dBm Quiescent Current (Idq) 600 600 mA Input Return Loss (S11) -6.3 -8.0 dB Output Return Loss (S22) -12.6 -11.5 dB T ypical Performance: 8V, 25 ºC Parameter Typical Units General Description The XF1000-BD is a high linearity Hetrojunction Field Effect Transistor (HFET) housed in a 3x6mm DFN package. Optimum performance is achieved when the device is biased at a drain voltage of 8V and drain current of 600 mA. At this bias point and at 4.9 GHz the device is capable of more than 34 dBm of P1dB and OIP3 of more than 46 dBm. The XF1000-DB is suitable for applications up to 5 GHz where it has 10 dB of gain.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 2 of 9 S-parameters: (Vdd=8V, Idd=600 mA) S-P arameters files ar e a vailab le f or do wnload at www .mimixbr oadband.com. S12 -36 -34 S21 DB(|S(2,1)|) DB(GMax()) Frequency (GHz) -42 -40 -38 dB Frequency (GHz) dB 1.0 00.6 0.8 S22 Swp Max 6G Hz 1.0 00.6 0.8 S11 Swp Max 6GHz 6 0 GH 6.0 GHz 1.0 10.0 10.0 5.0 5.0 2.0 2.0 3.0 3.0 4.0 4.0 0.2 0.2 0.4 0.4 0.6 0.8 1.0 10.0 10.0 5.0 5.0 2.0 2.0 3.0 3.0 4.0 4.0 0.2 0.2 0.4 0.4 0.6 0.8

1.6 GHz

0.9 GHz

2.0 GHz

2.4 GHz

3.5 GHz

6.0 GHz

-1.0 -10.0 -5.0 -2.0 -3.0 -4.0 -0.2 -0.4 -0.6 -0.8 Swp Min 0.1GHz -1.0 -10.0 -5.0 -2.0 -3.0 -4.0 -0.2 -0.4 -0.6 -0.8 Swp Min 0.1GHz

0.5 GHz

0.1 GHz

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 3 of 9 Evaluation Board: (3.6 GHz) Recommended Schematic Component Values VddVgg GND tuoFRniF R C8C7 C10 C2 C3 C62LT1LT TL3 REF. Designator DESCRIPTION QTY TYP TOLERANCE R1 RESISTOR, 100Ohm 0402 1 100 Ω C1 0 ohm link 1 0Ω Ref Designator Electrical Length TL1 50Ω, 20.8° TL2 50Ω, 9.3° TL3 50Ω, 77° C2 CAPACITOR, 2.2pF 0402 1 2.2pF 0.05pF C3 CAPACITOR, 4.0pF 0402 1 4.0pF 0.05pF C4 CAPACITOR, 2.2pF 0402 1 2.2pF 0.05pF C5 CAPACITOR, 1.6pF 0402 1 1.6pF 0.05pF C6 CAPACITOR, 20pF 0402 1 20pF C7, 9 CAPCITOR, 1uF 0603 1 1uF C8, C10 CAPACITOR, 10nF 0402 1 10nF

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 4 of 9 T ypical Performance: 3.6 GHz (Evaluation Board) XF1000-DB: 3.6 GHz Evalua tion Board, S-parameters XF1000-DB: 3.6 GHz Evaluation Board, NF vs. Frequency -25 -20 -15 -10 (dB) S11 S21 S22 3000 3200 3400 3600 3800 4000 NF (dB Id=400mA Id=500mA Id=600mA Frequency (GHz) Frequency (MHz) XF1000-DB: 3.6 GHz Evaluation Board, EVM vs. Pout vs. Frequency 4.5 5.5 6.5 FREQ=3.3 FREQ=3.4 FREQ=3.5 FREQ=3 6 0.5 1.5 2.5 3.5 20 21 22 23 24 25 26 27 28 EVM (%) FREQ=3.6 FREQ=3.7 FREQ=3.8 FREQ=3.9 XF1000-DB: 3.6 GHz Evaluation BoardOIP3 vs. Pout, 25°C XF1000-DB: 3.6 GHz Evaluation Board, OIP3 vs. Pout, 85°C 20 21 22 23 24 25 26 27 28 Pout (dBm) 22 23 24 25 26 27 28 29 30 31 32 33 OIP3(dBm) Freq(GHz)=3.3 Freq(GHz)=3.4 Freq(GHz)=3.5 Freq(GHz)=3.6 Freq(GHz)=3.7 Freq(GHz)=3.8 Freq(GHz)=3.9 22 23 24 25 26 27 28 29 30 31 32 33 OIP3(dBm) Freq(GHz)=3.3 Freq(GHz)=3.4 Freq(GHz)=3.5 Freq(GHz)=3.6 Freq(GHz)=3.7 Freq(GHz)=3.8 Freq(GHz)=3.9 Pout(dBm) Pout(dBm) XF1000-DB: 3.6 GHz Evaluation Board, P1dB vs. Frequency 33.5 34.5 32.5 P1dB (dBm) 30.5 31.5 P 25C 85C -40C 30.5 F (GH ) Frequency (GHz)

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 5 of 9 T ypical Performance: 3.6 GHz (Evaluation Board) (cont.) XF1000-DB: 3.6 GHz Evaluation Board, OIP3 vs. Pout, -40 ºC Bm) 22 23 24 25 26 27 28 29 30 31 32 33 Pout(dBm) OIP3(dB Freq(GHz)=3.3 Freq(GHz)=3.4 Freq(GHz)=3.5 Freq(GHz)=3.6 Freq(GHz)=3.7 Freq(GHz)=3.8 Freq(GHz)=3.9

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 6 of 9 Evaluation Board: (4.9 GHz) Recommended Schematic Component Values VddVgg GND tuoFRniFR C7C5C6 C8 3C2C TL1 TL2 TL3 REF. Designator DESCRIPTION QTY TYP Tolerance Ref Designator Electrical Lengthg R1 Resistor, 100Ohm 0402 1 100 Ω C1 CAPACITOR, 0402, 50V 1 20pF 5% C2 CAPACITOR, 0402, 50V 1 1.3pF 0.05pF C3 CAPACITOR, 0402, ,50V 1 1.4pF 0.05pF C4 CAPACITOR, 0402, 50V 1 20pF 5% C5, C7 CAPACITOR, 0603, 16V 1 1uF 10% g g TL1 50Ω, (not critical) TL2 50Ω, (not critical) TL3 50Ω, 66° C5, C7 CAPACITOR, 0603, 16V 1 1uF 10% C6, C8 CAPACITOR, 0402, 25V 1 10nF 10%

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 7 of 9 T ypical Performance: 4.9 GHz (Evaluation Board) XF1000-DB: 4.9 GHz Evaluation Board, S-parameters XF1000-DB: 4.9 GHz Evaluation Boad, P1dB vs. Frequency 34.5 -15 -10 (dB) S11 S21 S22 32.5 33.5 P1dB (dBm) -20 Frequency (GHz) Frequency (GHz) XF1000-DB: 4.9 GHz Evaluation Board, Gain vs. Pout XF1000-DB: 4.9 GHz Evaluation Board OIP3 vs. Pout Gain (dB) Freq(GHz)=4.6 Freq(GHz)=4.7 Freq(GHz)=4.8 Freq(GHz)=4.9 Freq(GHz)=5 .0 Freq(GHz)=5.1 OIP3(dBm) Freq(GHz)=4.6 Freq(GHz)=4.7 Freq(GHz)=4.8 Freq(GHz)=4.9 Freq(GHz)=5.0 Freq(GHz)=5.1 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Pout (dBm) 20 21 22 23 24 25 26 27 28 29 30 Pout(dBm)

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 8 of 9 Physical Dimensions Pin-out Details App Note [1] Biasing - The XF1000-DB requires power supply sequencing. Negative voltage supply (Vgg) needs to be turned on first and then positive voltage can be applied to the drain (Vdd). When turning off the device, the positive supply (Vdd) should be turned off first and then negative voltage (Vgg) can be removed. The gate voltage is adjusted in order to set the drain current to the desired level. The gate voltage required to achieve a certain current can vary over temperature and from one device to another due to pinch-off voltage variation. Constant drain current can be achieved by Implementing an active bias circuit which allows for temperature compensation and eliminates the effect of pinch off voltage variation. Description Pin # Vgg 7gg RF Input 3,4,5 RF Output /Vdd 10,11,12 NC 1,2,6,8,9,13,14

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. May 2010 - Rev 25-May-10 DC-5.0 GHz 34.0 dBm Packaged HFET Page 9 of 9 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.

Ordering Information

Part Number for Ordering Description XF1000-DB-0G00 Matte Tin plated RoHS compliant 3x6mm surface mount package in bulk quantity XF1000-DB-0G0T Matte Tin plated RoHS compliant 3x6mm surface mount package in tape and reel XF1000-DB-EV1 Evaluation Board @ 3600 MHz XF1000-DB-EV2 Evaluation Board @ 4900 MHz Caution: ESD Sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device.